Used processing in dubolinjun

Heraeus LHP10B MARK II UV Curing Power Supply & System –

• Manufacturer: Heraeus - Hanau - Vötsch

This listing is for a used Heraeus LHP10B Mark II LightHammer® UV curing power supply system. This high-performance unit supports the 10-inch class UV curing platform, with universal 200-480 V three-phase input, ...

XENON RC-500-B PULSED UV CURING SYSTEM

This listing is for a USED Xenon RC-500-B. This is a pulsed UV curing system designed for high-speed, low-heat curing of coatings, adhesives, and medical device components. It features a 1.5″ × 5″ curing area (ex...

1 Vacuum Chamber/Laser

For auction is a Spectra Physics laser and vacuum chamber for parts. Two "carts" of angle iron on casters they roll easily. These have not been tested by Surplus and it is unknown if it works. See pictures for mo...

Lot of Metal Lockers

Lot of Metal Lockers. Some locks do not work. See photos for details. Condition unknown, items are not tested prior to auction. Interested bidders should schedule a site-visit to inspect item condition in person,...

Merrick 570

• Manufacturer: Merrick

MOTOR SPECS: MODEL: JV56T17W5326B HORSEPOWER (HP): 2 HP SPEED (RPM): 1725 VOLTAGE: 208–230/460 V PHASE: 3 FREQUENCY: 60 HZ DUTY: CONTINUOUS (CONT.) MAX AMBIENT TEMPERATURE: 40 °C

Telsmith 6X16

• Manufacturer: Telsmith
• Model: 6X16

-Twin Telsmith 36” x 25’ Sand Screws -New flights recently installed -JCI 6 x 16 3 Deck Horizontal Screen Please call with any questions, (410) 216-3949, Se Habla Español.

CMC SMP-1.5 Media Mill

This listing is for a USED CMC SMP-1.5. It is designed for fine particle size reduction and dispersion in industrial mixing applications. This unit is categorized as a media mill and includes the following capabi...

2006 Vision Engineering Hawk MKII

• Manufacturer: Vision Engineering

Dynascopic viewing head with crosshair reticle Hawk metrology stand (3-axis) with LED substage illumination (manual operation) Power cable for Hawk head 3-channel LED illumination controller for manual systems I/...

1989 Hex Industries VAC-836-FT

• Manufacturer: Hex Industries

Equipment Overview Passive vaporizer using ambient air convection across finned tubes for vaporizing cryogenic liquids. Key Features & Specifications • 10,000 SCFH • 400 PSIG pressure • Finned tube design • Natur...

2021 Matrix MX370P

• Manufacturer: Matrix

Speed 10 m/min (33 ft/min) Film Width 340 mm (13″) Sheet Width 420 mm (17″) Paper Weight ≥ 135 gsm Temperature 0–140 °C Control Multilingual LCD, semi-auto feed, auto separator Power 220–240 V, ~13 A, 2.2 kW Size...

2020 Turfco Torrent 2

• Manufacturer: Turfco
• Model: TORRENT 2

Model Torrent 2 Debris Blower (#85651) Width Outside of tire to outside of tire – 48” (1.22 m) Height Nozzle pointed up – 40.5” (1.03 m), To top of engine – 36” (0.92 m) Length Hitch to end of chute – 108.8” (2.7...

2021 P/A Industries SS89LASTL

• Manufacturer: PA Industries

Manufacturer P/A Industries Model SS89LASTL Type Pallet Reel Straightener Coil Type Pallet-mounted coil (horizontal payoff design) Max Coil Width Approx. 18–24 in. (depending on configuration) Max Coil OD Approx....

2007 Mokon Iceman

• Manufacturer: Mokon

230 Volt, 3 Phase Portable Chiller. 1 HP Compressor .75 HP Motor. Max Temp 70 Degrees F. R-22 Refrigerant.

2025 LaON Technology Pilot

• Manufacturer: LaON Technology

Four-lane carbide knife cutting with ±0.1mm accuracy and <20μm burr specification Wheel-type knife system with AC reversible motor drive and fixed block configuration EPC system with speed control motor for elect...

2024 Ramco MK30EBSS

• Manufacturer: Ramco

Tank Size (Int.) 30″ × 22″ × 21″ Working (Basket) Zone 28″ × 17″ × 13″ Liquid Capacity 40 gallons Load Height 30.6″ Machine Footprint 33″ × 29″ × 57″ Agitation Speed 240 strokes/min (with dual-mode) Construction ...