Used processing in Hamburg, Germany

Three-jaw chuck from – diameter 250 mm 21361

Three-jaw chuck, three-jaw lathe chuck Feed size: Ø 250 mm | Passage: Ø 70 mm | Recording process: Ø 194 mm | Mass: 20 | Internal storage: Hall 3

Three-jaw chuck by WMW Niles - diameter 250 mm 21314

• Manufacturer: Niles

three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck

HASSIA-REDATRON Flexibag FB BC 600 G3, FFS, flat foil bag filling, 20 bags per minute, sand, soil, pellets, peat, mulch

• Manufacturer: Hassia

Flexibag FB BC 600 G3 Continuous filling of sand, soil, mulch, pellets, etc. Approx. 20 cycles per minute. Film width to be determined. Belt feeder. Documentation available. Used machine.

Three-jaw chuck from – diameter 200 mm 21356

three-jaw chuck, 3-jaw chuck Feed size: Ø 200 mm | Recording process: Ø 168 mm | Passage: Ø 55 mm | Mass: 12 | Internal storage: 3A20502

2006 Friz Profi PWP 120/42 98390

• Manufacturer: Friz

Control: Yes | Suitable for veneer and paper: 2D slide | Film width mm: 450 | Glue system pu: PURE | Feed min-max m/min: 6 - 40 | Feed stepless: Yes | Roll diameter mm: 152 | Workpiece width min-max mm: 10 - 450...

1997 IMA Compact PC/KIF 7220 90171

• Manufacturer: IMA
• Model: Compact PC

Program: Yes | Axle control: Yes | Binder thickness max mm: 3 | Bonding height max mm: 50 | Thickness roll material max mm: 3 | Plate length min mm: 250 | Roll magazine: Yes | Strip magazine: Yes | Joint milling...

1992 HOMAG Maschinenstrasse Kf 62 60130

• Manufacturer: Homag
• Model: KF 62

Workpiece width min-max mm: Machine 1 1200 mmMachine 2 2600 mm | Workpiece length min- max mm: 250-2600 | Workpiece height min- max mm: 10-50 | Edge material thickness min-max mm: 0,5-3,0 | Ma 1 working width mi...

2005 Kleistronik KT 96000 veneer measuring system 95640

• Manufacturer: Kleistronik

Program: Evaluation software for sparking packages | Veneer parquet measurement: Yes | Barcode printer: Yes | Infeed conveyor: Yes | Scanner: Yes | Outlet belt: Yes | Feed rate m/min: 60 | Software evaluation: Y...

Clamping force control unit from Demag - DMS-SKR 79/5 30547

• Manufacturer: Demag

Injection molding machine, clamping force control unit, control unit

1992 Spraying machine 25 to from Battenfeld - DA 250/50 CD 3164

• Manufacturer: Battenfeld
• Model: DA 25050 CD

Spraying machine -control Unilog 2040 -data acquisition terminal -parts removal device make ASS -temperature control unit make Single

Length stop from – length 500 mm 36030

Cross cut fence, Longitudinal fence, Saw fence, Material fence, Motorized cross cut fence, Controlled cross cut fence

ABX Micros CRP 200

• Manufacturer: ABX

Overview Simultaneous CBC & CRP Compact analyzer Integrated reagents Reliable results "Zero maintenance" compact data management systemmpedance technology, photometry, immunoturbidimetry Features ABX Micros CRP 2...

Key bar chuck from – 220 mm 19421

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Soft interchangeable jaws

Sanitary Disc Valve with Pneumatic Actuator DN50

• Manufacturer: Alfa-Laval

Operation: pneumatic actuator | Nominal diameter: DN50

1980 Two spindle copy milling machine from Elu - KF 78 26428

• Manufacturer: Elu

Copy milling machine, copy router, hand lever milling machine, hand lever router -with 1 vertical and 1 horizontal milling motor -installation dimensions 2800/1100/H1630 mm -transport dimensions 800/1200/H1630 mm