Used progress in Bern, Switzerland

Augers progressive auger

progressive auger, 1 cutting edge, 3 rock bits on spiral + pilot with 4 rock bits

Augers progressive auger

progressive auger, 1 cutting edge, 1 tooth + 3 teeth + 1 rock bit on spiral + pilot 4 rock bits

Augers progressive auger

progressive auger, 1 cutting edge, 1 rock bit + 9 rock bits on spiral + pilot 4 rock bits

ABF Augers progressive auger

• Manufacturer: ABF

progressive auger, 1 cutting edge, 16 finger bits at spiral + finger-bit pilot with 9 finger bits + centering

1965 G&H Bottomer Progress 525

• Manufacturer: GARTEMANN & HOLLMANN

GARTEMANN & HOLLMANN Bottomer Progress 525 year 1965 Year: 1965 For the production of open mouth and valve sacks Manufactured sacks: from 1 to 5 layers (depending on the paper grammage. 80 gr is the suggested pa...

CENTERLESS GRINDING MACHINE “AGATHON” 150-SL

• Manufacturer: Agathon

Inventory Nr.2170082, machine including : – 1 plunge device – 1 work-wheel flange – 1 driving-wheel flange – 1 work-wheel trueing-up device – 1 driving wheel trueing-up device – 1 gibs support – 1 set of gibs – 1...

1978 PLATARG 312 Ref No: 50301

• Manufacturer: PLATARG

Standard flat plate lifters Pneumatic feeder Machine still in production - video available

1986 PLATARG 612 Ref No: 43820

• Manufacturer: PLATARG

12 Rams and (1 Slave- TBD) Full follow cams Wedge adjustable type rams Stroke of Cams: 4.25" or 107mm Depth of draw (Shell Height): 2" or 50mm Transfer slide - none Platarg type Zig-Zag Feeder - material input fr...

2025 PLATARG 312 HS Ref No: 48610

• Manufacturer: PLATARG

Object: 48610 | Controls: BECKHOFF | Number of slide actions: 13 | Slide force: 3 to | Stroke: 60 mm | Stroke rate (max.): 210 /min | Slide adjustment: 6 mm | Variable speed: yes | Stroke rate (min.): 70 /m...

1971 PLATARG 611 Ref No: 41435

• Manufacturer: PLATARG

Platarg transfer press 611 Specifications: Number of stations: 12 (11+1) Capacity per ram: 6 tons Maximum stroke: 114 mm Max. shell height: 50 mm Standard ram pitch: 82 mm Blank diameter: 80 mm

1987 PLATARG 912 Ref No: 46450

• Manufacturer: PLATARG

The press is now in storage - was in a full running state when taken out of service. High lift stroke cams 159 mm - max. shell height 76 mm 13 Stations, 12 Rams + 1 Slave Wedge Adjustable Rams with Standard Male ...

1994 KAISER KSTU ZA 2000-15P Ref No: 43706

• Manufacturer: Kaiser

+ Coil feed line KOHLER with straightener KRE2 18.260/19 + Feeder KAISER KWV 250 + 2-axis gripper bars transfer SANDER with adjustable pitch + table cushion rail with various cushions and fillers (separate data s...

1996 PLATARG 2513 Ref No: 46301

• Manufacturer: PLATARG

Can be tested in operation Max. Flywheel speed: 760 1/min. Capacity on one stage approx. 25T Clutch engagement max. 10/min Air pressure 5.5 bar (min) - 5.8 bar (max) Total deceleration time Braking <250 ms Zig...

1977 PLATARG 611 Ref No: 43685

• Manufacturer: PLATARG

A new electrical control system and a mechanical and lubrication rebuild are required. One used PLATARG model 611 transfer press, high speed type. Full follow cams. Number of stations: 12 Number of rams: 11 + 1 s...