Building Filters
FANUC ROBODRILL A-T100 CNC VERTICAL MILL ATC TOOL CHANGER HOLDER FINGER EACH 1
- Manufacturer: Fanuc
- Model: Robodrill
THIS LISTING IS FOR 1 SET. THERE ARE 10 SETS IN THE PHOTO
$60 USDSanta Clarita, CAFANUC ROBODRILL ALPHA A-T14IA CNC VERTICAL MILL ATC TOOL CHANGER CAROUSEL HOLDER
- Manufacturer: Fanuc
- Model: Robodrill
THIS PART WAS REMOVED FROM A 2001 FANUC ROBODRILL ALPHA A-T14IA CNC VERTICAL MILL WITH FANUC CONTROL WE DISMANTLED.
$520 USDSanta Clarita, CAFANUC ROBODRILL A-T100 CNC VERTICAL MILL ATC TOOL CHANGER HOLDER FINGER LOT OF 3
- Manufacturer: Fanuc
- Model: Robodrill
THIS LISTING IS FOR 3 SETS. THERE ARE 10 SETS IN THE PHOTO
$70 USDSanta Clarita, CAFANUC ROBODRILL A-T10C CNC VERTICAL MILL ATC TOOL CHANGER CARUSEL HOLDER DRUM
- Manufacturer: Fanuc
- Model: Robodrill
THIS PART WAS REMOVED FROM A MITSUBISHI DWC-90HA CNC EDM THAT WE DISMANTLED.
$590 USDSanta Clarita, CA- Trusted Seller
2015 HELLER FT 8000
- Manufacturer: Heller
- Model: FT 8000
Yom: 2015 | Cnc: Siemens 840 dsl | Stroke x/y/z: 1250/1200/1400 mm | Spindle speed: 8000tr/min | Spindle: 60kW // 1150 Nm | Tool holder: SK 50 | Atc: 50 tools | B axis continuous: 360.000° x 0.001° | Table rotat...
St-Chamond, France FANUC ROBODRILL ALPHA A-T14IA CNC VERTICAL MILL ATC TOOL CHANGER HOLDER LOT OF 3
- Manufacturer: Fanuc
- Model: Robodrill
THIS PART WAS REMOVED FROM A 2001 FANUC ROBODRILL ALPHA A-T14IA CNC VERTICAL MILL WITH FANUC CONTROL WE DISMANTLED. THERE ARE 12 SETS IN PHOTOS. LISTING IS FOR 3 SET ONLY
$60 USDSanta Clarita, CA- Trusted Seller
2011 HARTFORD LG1000
- Manufacturer: Hartford
- Model: LG-1000
Cnc: FANUC Hartrol AI100 | Working surface: 1150 x 510 mm | Max.table load: 700 Kg | Longitudinal travel (x-axis): 1000 mm | Cross travel (y-axis): 510 mm | Vertical travel (z-axis): 630 mm | Distance from spind...
St-Chamond, France - Trusted Seller
2012 AWEA BM1200
- Manufacturer: Awea
- Model: BM-1200
- Spindle taper: BT 40
Cnc: Heidenhain 530 | Stroke x, y, z: 1200x600x600mm | Spindle speed: 8000 rpm | Table size: 1300x600mm | X, y rapid feed-rate: 24000 mm/min | Magazin: 24 positions | Spindle taper: BT40 | Machine weight: 7300 k...
St-Chamond, France - Trusted Seller
2022 FANUC ROBODRILL α-D21LiB5 MACHINING CENTER
- Manufacturer: Fanuc
Our company directly owns the machines. We have five showrooms in Korea, where we check all the issues with the machines, repair them, and then sell them. You can purchase with confidence. We always carefully ...
$1 USDSouth Korea - Trusted Seller
2007 MAZAK QuickTurn Nexus 200 II MS
- Manufacturer: Mazak
- Model: QUICK TURN NEXUS 200-II MS
- Spindle bore: 65 mm
Cnc: MAZATROL Matrix Nexus 2 | Maxi turning diameter: 380 mm | Spindle bore: 65 mm | Spindle speed: 5000 rpm | Z axis: 575 mm | Turret: 12 posts
St-Chamond, France - Trusted Seller
2012 HURCO VM10U
- Manufacturer: Hurco
- Model: VM10U
Controller: Win Max | Strokeaxis x, y, z: 533 x 406 x 483 mm | Stroke axis a, c: +30°/-110° /// 360° | Distance spindle nose / table min/ max: 36 / 519 mm | Table dimension: 198 mm | Maxi table weight: 150 kg | ...
St-Chamond, France - Trusted Seller
2013 HAAS ST20SS
- Manufacturer: Haas
- Model: ST-20SS
- Spindle bore: 38 mm
Chuck diameter: 210 mm | Maxi diameter over carriage: 527 mm | Maxi turning diameter: 254 mm | Spindle bore: 51 mm | X axis: 236 mm | Z axis: 533 mm | Rapid stroke x axis: 24.0m/min | Rapid stroke z axis: 30.0m/...
St-Chamond, France - Trusted Seller
2022 Fanuc ROBODRILL α-D14MiB
- Manufacturer: Fanuc
- Model: Robodrill
Three-axis travel: 500*400*330mmDistance from Worktable to Spindle gauge surface : 150mm~480mmWorktable Size: 650*400mmWorktable Load: 300kgSpindle speed: 24000rpmTools magazine Capacity：14
China - Trusted Seller
2015 Fanuc ROBODRILL α-D14MiA
- Manufacturer: Fanuc
- Model: Robodrill
CNC System: FANUC 31i-BSpindle speed: 10000rpmX*Y*Z axis travel: 500*400*330mmWorktable size: 650*400mm
China - Trusted Seller
2013 CAZENEUVE Optimax 590 Plus
- Manufacturer: Amutio - Cazeneuve
- Model: Optimax 590
- Spindle bore: 82 mm
Cnc: Siemens | Max diameter: 583 mm | Distance between centers: 1800 mm | Maxi turning length: 1710 mm | Spindle bore: 82 mm | Spindle speed: 2500 rpm
St-Chamond, France 
Fanuc Robodrill Machining Center
- Manufacturer: Fanuc
- Model: Robodrill
Good condition Fanuc Robodrill Machining Centers manufactured in 2015. Located in Singapore and other countries. Click request price for more information.
Singapore
