• Shopbot 48x96 CNC Router

    $5,500 - Sheboygan, WI, USA
    • Manufacturer: Shopbot

    1998 model year portable cable router pc controller stepper motors no vacuum

  • 2008 Morbidelli Author 636S CNC 4-Station Router

    $80,000 - Buffalo, NY, USA
    • Manufacturer: Morbidelli

    features: tooling: depicted in attached pictures hours: between 200 and 300 maintenance: machine was serviced every 60 days when in production by a service company out of boston, ma. usage: r...

  • Baileigh WR-48V Router Table

    $13,950 - Sheboygan, WI, USA
    • Manufacturer: Baileigh

    220 v, 3 phase 10 hp vacuum pump 4' x 8' table 6,000-24,000 rpm 7.5" z-axis stroke 787 max inches per minute movement speed 787 max inches per minute engraving speed .0015" reposition accuracy 1/8"...

  • Her-Saf 144 Vertical Panel Router

    $1,795 - Sheboygan, WI, USA
    • Manufacturer: SAF

    48" vertical routing capacity unlimited horizontal routing capacity 2" max material thickness 15 amp router motor 120" x 48" back fence area counter weighted router 110 v, single phase

  • Onsrud Model 240C Pin Router

    $2,395 - Sheboygan, WI, USA
    • Manufacturer: C.R. Onsrud

    220/240 v, 3 phase s/n 1769 3 hp motor condition info: cleaned & checked

  • Onsrud RO-117H Pin Router

    $1,895 - Sheboygan, WI, USA
    • Manufacturer: C.R. Onsrud

    26" throat capacity and 4-1/2" max. material thickness 3 hp motor belt drive dynamically balanced spindle @ 20,000 rpm 1/4" - 3/8" & 1/2" collet sizes 20" x 32" table size with forward tilt 4-1/4" ...

  • Thermwood Model C53 CNC Router

    $33,500 - Sheboygan, WI, USA
    • Manufacturer: Thermwood

    moving gantry fixed table style 60" x 120" table size travels 60" x-axis, 120" y-axis, 6" z-axis 900 ipm feed rate router hp: 18 @ 24,000 rpm up to 3/4" router bit shank size 191" l x 95" w x 82" h...

  • Weeke BHC 250 CNC Router

    $32,000 - Sheboygan, WI, USA
    • Manufacturer: Weeke

    spindle needs to be reconditioned one floor mat to be checked and repaired both repairs can be covered with your stiles tech on installation must-sell; weighing all offers 10 vertical drilling spin...

  • BIESSE CNC ROUTER-ROVER B 4.40 FTK

    $58,995 - Grand Rapids, MI, USA
    • Manufacturer: Rover

    1-used biesse rover b 4.40 ftk cnc machining center. working field: x= 145″, y= 54.3″, z= 5.9″, precision machined table, 3 back reference pin stops, 1 slide reference pin stop (lh side), centraliz...

  • WEEKE Flat Table CNC Router-BHP-200

    $70,000 - Grand Rapids, MI, USA
    • Manufacturer: Weeke

    used weeke model bhp-200 5′ x 12′ flat table cnc router w/ part push-off, complete with the following equipment: 12hp router motor atc with 8 tool positions vertical boring block with 10 high speed...