Used rubber machinery

ADVANCE 21" WALK BEHIND SCRUBBER 14002

• Manufacturer: Advance
• Model: BA 5321

MODEL: BA 5321 21" SCRUB PATH 21" BRUSH / PAD SIZE 180 R.P.M. BRUSH SPEED 60 dB A SOUND LEVEL EQUIPPED WITH: 30.3" SQUEEGEE, CURVED STYLE WITH CENTER PIVOT MOUNTING WITH 4 SIDED WIPING BLADES 14.5 GALLON POLYETH...

TENNANT FLOOR SCRUBBER 7300 Z24029L

• Manufacturer: Tennant
• Model: 7300

MaxPro™ 1000 scrub head (standard) 40-inch Edge scrub reach 5-inch Solution tank 57 gallon Disc scrub head Speed 320 rpm Down pressure weight (variable to) 500 lb Brush diameter (2) MP1000 20-inch Brush di...

MINUTEMAN POWERBOSS 26 FLOOR SCRUBBER 10046e

• Manufacturer: Powerboss

MODEL: PB260026QP 266 IND SERIAL: VPB260026QP0846 POWERBOSS 26 26" SCRUB PATH 35" SQUEEGEE WIDTH 28000 SQ FT/HR 3/4 HP DRIVE/24-DC V/ 50 AMPS CHARGER (2) 13.5" BRUSHES 250 RPM BRUSH SPEED 0-215 FT/MIN 23 GALLON S...

WINDSOR STRIDE 2 WALK BEHIND FLOOR SCRUBBER 12062A

• Manufacturer: Windsor

MODEL: QQSX428 SERIAL #: 1000040816 28" WIDTH ELECTRIC 24 VOLTS STRIDE 2 GOOD CONDITION

TENNANT 355-3608 FLOOR SCRUBBER

• Manufacturer: Tennant

TENNANT Model 355-3608 LP Ride on Floor Scrubber. Item: LP RIDE on FLOOR SCRUBBER

TENNANT 8300 SWEEPER SCRUBBER Z23061

• Manufacturer: Tennant
• Model: 8300

ELECTRIC 50" CLEANING PATH SWEEPING MAIN BRUSH SPEED 480 RPM DEBRIS HOPPER 3 CUBIC FT 300 LBS SIDE BRUSH DIAMETER 19" 40" CLEANING PATH SCRUBBING 57 GALLON SOLUTION TANK 36 VOLT 2007 1072 HOURS NEW COST $90,000 M...

(Inv.55054) Rubbermaid Cart

This Unit Is Part Of Kann Welding Liquidation

2010 Eva Production Lines

• Manufacturer: Eva

1. Chemical Compounding compounded in a reactor to create additives used in the formation of blending chip 2. Raw Material Handeling and EVA resin mixed in a mixer to create blending chip 3. Extruding of EVA shee...

PCI 78FB

• Manufacturer: PCI

Two (2) Rotating Blades One (1) Stationary Blade Directly Driven by a 2 HP 208-230/460 Volt 1725 RPM A/C Motor, Mounted on Frame Two Trim Inlets. S/N 71992 Trim Cutter on Unitized Frame with Sterling Model 6UHE B...

1999 Moretto DYT204 MT Hopper Dryer

• Manufacturer: Moretto

Model DT 204 MT dehumidifying hopper dryer rated 150c/m an hour. With model DH 300T hopper having a 350 lt capacity. Mfd 1999. Serial number 991136. weight 235 kg. 400/3/50

Corona CR104-PE Treater

• Manufacturer: Corona

Unit Has Individual Sliding Fingers that Adjust up To a 50” Wide Treater Width. with 2 Kw High Voltage Transformer and Controls. Model CR104-PE Serial Number T-15974-04-10 Job number T-15974. Model CPT-20 control...

1999 Gloucester 3-Roll Cooling Stack – 60″ x 24″ – 1999 – For Sheet Extrusion

• Manufacturer: Gloucester

60″ Gloucester Cooling and Polishing Stand (3) Nominal 24″ Diameter Chrome Plated Rolls -Mounted in a 45 degree arrangement for down stack operation. Rolls are Pneumatically Actuated. Chrome rolls are via approxi...