Building Filters
Mega-Blast Series
- Manufacturer: MANUS Abrasive Systems
Mega-Blast Bulk Abrasive Blasters are available in two standard sizes, either 100 Cu. Ft. (2800 Litre) or 160 Cu. Ft. (4500 Litre) capacity. Custom engineered machines are also available. High-volume and high-pro...
Edmonton, Canada- Trusted Seller
GPU, Single, 20"x7', 1440, 750 mbtu
- Manufacturer: Sivalls
Gas production unit with a 20"x7' 1440 3-phase separator. Heater has a 750 mbtu/hr burner and a 35"x78"x117" firetube. Coil is a single rated 2" XXH 5,000 psi coil, with 71.38 sq ft of preheat and 12.02 sq ft of ...
- Trusted Seller
3000 U.S. Gallon carbon steel vacuum Unit, DOT 407/412, full opening rear door, hydraulic hoist dump mounted on a Western Star 47X chassis
- Manufacturer: Western Star
Western Star 47X w/Cummins X12 380 HP engine and Eaton RTO-14908LL manual transmission. Code: D.O.T. 407 / 412 Vessel will be constructed and certified in conformance with the ASME Boiler and Pressure Vessel Cod...
United States - Trusted Seller
Sand Trap, Gravity, 28"x8', 5000#
- Manufacturer: CTJ Energy Solutions
28"x8' 5000 psi Gravity Sand Trap mounted to an L-Skid. Inlet and Outlet are flanged 3" 2500 RTJ with a 2" 2500 RTJ drain port, (1) 1/2" accessory port and a 1" 2500 PRV port. Unit has been recently steam flushed...
- Trusted Seller
Sand Trap, Gravity, 28"x8', 5000#
- Manufacturer: CTJ Energy Solutions
28"x8' 5000 psi Gravity Sand Trap mounted to an L-Skid. Inlet and Outlet are flanged 3" 2500 RTJ with a 2" 2500 RTJ drain port, (1) 1/2" accessory port and a 1" 2500 PRV port. Unit has been recently steam flushed...
- Trusted Seller
Sand Trap, Gravity, 28"x8', 5000#
- Manufacturer: CTJ Energy Solutions
28"x8' 5000 psi Gravity Sand Trap mounted to an L-Skid. Inlet and Outlet are flanged 3" 2500 RTJ with a 2" 2500 RTJ drain port, (1) 1/2" accessory port and a 1" 2500 PRV port. Unit has been recently steam flushed...
- Trusted Seller
Sand Trap, Gravity, 28"x8', 5000#
- Manufacturer: CTJ Energy Solutions
28"x8' 5000 psi Gravity Sand Trap mounted to an L-Skid. Inlet and Outlet are flanged 3" 2500 RTJ with a 2" 2500 RTJ drain port, (1) 1/2" accessory port and a 1" 2500 PRV port. Unit has been recently steam flushed...
- Trusted Seller
Sand Trap, Gravity, 28"x8', 5000#
- Manufacturer: CTJ Energy Solutions
28"x8' 5000 psi Gravity Sand Trap mounted to an L-Skid. Inlet and Outlet are flanged 3" 2500 RTJ with a 2" 2500 RTJ drain port, (1) 1/2" accessory port and a 1" 2500 PRV port. Unit has been recently steam flushed...
- Trusted Seller
Sand Trap, Gravity, 28"x8', 5000#
- Manufacturer: CTJ Energy Solutions
28"x8' 5000 psi Gravity Sand Trap mounted to an L-Skid. Inlet and Outlet are flanged 3" 2500 RTJ with a 2" 2500 RTJ drain port, (1) 1/2" accessory port and a 1" 2500 PRV port. Unit has been recently steam flushed...
- Trusted Seller
Sand Trap, Gravity, 28"x8', 5000#
- Manufacturer: CTJ Energy Solutions
28"x8' 5000 psi Gravity Sand Trap mounted to an L-Skid. Inlet and Outlet are flanged 3" 2500 RTJ with a 2" 2500 RTJ drain port, (1) 1/2" accessory port and a 1" 2500 PRV port. Unit has been recently steam flushed...
- Trusted Seller
Sand Trap, Gravity, 28"x8', 5000#
- Manufacturer: CTJ Energy Solutions
28"x8' 5000 psi Gravity Sand Trap mounted to an L-Skid. Inlet and Outlet are flanged 3" 2500 RTJ with a 2" 2500 RTJ drain port, (1) 1" accessory port and (2) 1" 2500 PRV port. Unit has been recently steam flushed...
- Trusted Seller
Sand Trap, Gravity, 28"x8', 5000#
- Manufacturer: CTJ Energy Solutions
28"x8' 5000 psi Gravity Sand Tra28"x8' 5000 psi Gravity Sand Trap mounted to an L-Skid. Inlet and Outlet are flanged 3" 2500 RTJ with a 2" 2500 RTJ drain port, (1) 1/2" accessory port and a 1" 2500 PRV port. Unit...
- Trusted Seller
Sand Trap, Gravity, 20"x8', 5000#
- Manufacturer: Quicksilver Resources Inc.
20"x8' 5000 psi Gravity Sand Trap mounted to an L- skid. Inlet and outlet are flanged 3" 2500. Unit was recently steam flushed, sandblasted, and primed with industrial rust inhibitor. U1A can be found under the d...
- Trusted Seller
Sand Trap, Gravity, 20"x8', 5000#
- Manufacturer: Quicksilver Resources Inc.
20"x8' 5000 psi Gravity Sand Trap mounted to an L- skid. Inlet and outlet are flanged 3" 2500. Unit was recently steam flushed, sandblasted, and primed with an industrial rust inhibitor. U1A can be found under th...
- Trusted Seller
Sand Trap, Gravity, 20"x8', 5000#
- Manufacturer: Quicksilver Resources Inc.
20"x8' 5000 psi Gravity Sand Trap mounted to an L- Skid. Inlet and outlet are flanged 3" 2500 RTJ. Unit was recently steam flushed, sandblasted, and primed with industrial rust inhibitor. U1A can be found under t...