Used sander

Trusted Seller
Larick 260 SERIES Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: Larick
The 260 Series Profile Sander is a horizontal spindle machine designed for use with flexible brush type sanding wheels. The base machine has 40mm diameter spindles extending 175mm on both sides. 50mm diameter ext...
Apple Creek, OH
Trusted Seller
Oliver 6305 Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: Oliver
- Model: 6305
•Can be used with the belt in the horizontal or vertical position or any angle in between. •Precision ground steel platen is graphite covered to reduce heat. •Cast iron table is vertically adjustable allowing ful...
Apple Creek, OH
Trusted Seller
Ritter R258 Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: Ritter
The RITTER R258 Single Sided Oscillating Edge Belt Sander is unique from the other Ritter 6″ x 132″ machines, in that the entire platen assembly raises and lowers to give the operator use of the entire belt surfa...
Apple Creek, OH
Trusted Seller
Powermatic DS20 Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: Powermatic
- Model: DS20
20″ sanding disc for larger capacity Direct drive from motor to disc for maximum efficiency Forward and Reverse Switch Forward and reverse switch for additional usage Miter gauge for angle sanding Disc brake slow...
Apple Creek, OH
Trusted Seller
Rehnen PSM-1 Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: Rehnen
- Model: PSM-1
The Rehnen PSM-1 sanding and polishing machine can be used for many kinds of surface treatment. The PSM is ideally suited for the sanding and polishing of moulded parts. The spindle is able to handle a wide range...
Apple Creek, OH
Trusted Seller
Rehnen RS-2010 Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: Rehnen
- Model: RS-2010
The Rehnen RS-2010 Edge sanding machine is designed for enhanced user-friendliness. The edge sanding machine RS 2010 – which features a diverse range of equipment – performs all edge sanding tasks in the field of...
Apple Creek, OH
Trusted Seller
Larick 150 SERIES Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: Larick
The key to successful profile sanding is a combination of machine versatility, use of the correct abrasive medium, and a little patience and understanding. The results are a remarkable increase in consistency, qu...
Apple Creek, OH
Trusted Seller
CA Manufacturing 236 Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: CA Manufacturing
Sand chair bows, chair backs, chair posts, rocker rails, bed slats, table rims, etc. •Consistent Finish •Multiplies Productivity •2 Feeder Styles •Easy Setup & Operation •Multiplies Productivity •Adjustable Consi...
Apple Creek, OH
Trusted Seller
Powermatic OES9138 Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: Powermatic
- Model: OES9138
The large 11-3/4″ x 48″ table on the OES9138 oscillating edge sander travels a full 8″ in vertical height to accommodate most woodworking pieces. It will also tilt negative 5° and out to positive 45°. The cast ir...
Apple Creek, OH
Trusted Seller
Oliver 6910.003 Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: Oliver
Oliver Floor Spindle Sander 10 Spindels 1/4″To 4″ Tilt Table Refurbished Machine By Oliver Machinery
$1,980 USD
Apple Creek, OH
Trusted Seller
Larick 220 SERIES Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: Arista
The Larick Model 220 features two counter-rotating spindles to be used with brush type sanding wheels. This allows parts to be sanded without noticeable rounding over on corners. The sanding technique is to sand ...
Apple Creek, OH
Trusted Seller
Cantek LBS300 Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: Cantek
Eliminate hand sanding with our economical sanding and de-nibbing solution for linear profile. The Cantek LBS300-5S 3-sided lineal brush sander is designed to help with your everyday linear profile sanding needs....
Apple Creek, OH
Trusted Seller
Kalamazoo 1" Belt Sander
- Manufacturer: Kalamazoo
.33 Hp, 1725 Rpm Name: Belt Sander | Arrival date: 10-31-2025 | Dimensions l x w x h (inches): 15 x 10 x 22 | Capacity: 1" | Electrical: 1/60/208/230 | Weight (lb.): 27 | Available quantity: 1
$100 USD
Euclid, OH
Trusted Seller
Kalamazoo 1" Belt Sander
- Manufacturer: Kalamazoo
1/3 Hp, 1725 Rpm Name: Belt Sander | Arrival date: 10-31-2025 | Dimensions l x w x h (inches): 15 x 10 x 22 | Capacity: 1" | Electrical: 1/60/208/230 | Weight (lb.): 27 | Available quantity: 1
$100 USD
Euclid, OH
Trusted Seller
Ritter R25814 Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: Ritter
The CR25814 offers the tallest belt in the Ritter series of edge sanders. It is perfect for sanding finger joint and/or dovetailed drawer boxes. This tall belt machine has a solid single table, and the heaviness ...
Apple Creek, OH
DMC Unisand K Sander
- Manufacturer: DMC
- Model: Unisand K
Good condition DMC Unisand K Sanders manufactured in 2004. Located in Italy and other countries. Click request price for more information.
Italy