Used screwdriver

SPIKA NG285 - UNDER COUNTER ICE MAKER

OPERATING LIMITS: Tropicalized machines (Class T); Suitable for low temperature environments of 41° (5°C) Air and Water and high temperature environments of 109⁰F (43⁰C) (Air), 95°F (35°C) (Water) Water pressure:...

SPIKA NG175- UNDER COUNTER ICE MAKER

OPERATING LIMITS: Tropicalized machines (Class T); Suitable for low temperature environments of 41° (5°C) Air and Water and high temperature environments of 109⁰F (43⁰C) (Air), 95°F (35°C) (Water) Water pressure:...

Pneumatic screwdriver Norbar Mod. 18033, Pneutorque PT 72, 2000 Nm RRP 4985 €

• Manufacturer: Norbar

2000 Nm Norbar System Mod. 18033, PT72, RRP €4,985 Shipping by parcel up to 12 kg.

Ultramatic Inline Flo-Thru Continuous Systems

• Manufacturer: Ultramatic
• Model: Inline Flo-Thru Continuous Systems

Elevate Your Production with Ultramatic's Inline Flo-Thru Continuous Systems As the leading manufacturer of Inline Flo-Thru Continuous Systems, Ultramatic is dedicated to optimizing your manufacturing processes....

TECHNE ANY

• Manufacturer: Techne

The Sturtevant Any Torque Calibration Set, specifically Class C and produced by Richmont, is an essential kit for calibrating and verifying torque measurement tools and equipment in industrial and professional se...

DESOUTTER TMP220

• Manufacturer: DESOUTTER

The DESOUTTER TMP220 Torque Tester is a device used to measure the torque output of power screwdrivers and similar tools. It has a maximum capacity of 10 Nm (Newton meters) or 100 in-lbs (inch-pounds) and is suit...

Ultramatic Inline Flo-Thru Continuous Systems

• Manufacturer: Ultramatic
• Model: Inline Flo-Thru Continuous Systems

Elevate Your Production with Ultramatic's Inline Flo-Thru Continuous Systems As the leading manufacturer of Inline Flo-Thru Continuous Systems, Ultramatic is dedicated to optimizing your manufacturing processes....

Ultramatic Inline Flo-Thru Continuous Systems

• Manufacturer: Ultramatic
• Model: Inline Flo-Thru Continuous Systems

Elevate Your Production with Ultramatic's Inline Flo-Thru Continuous Systems As the leading manufacturer of Inline Flo-Thru Continuous Systems, Ultramatic is dedicated to optimizing your manufacturing processes....

Synthes 4.5mm Cannulated Screw Set Partial Thread Only Self-Tapping

• Manufacturer: Synthes

Synthes 4.5mm Cannulated Screw Set -Partial Thread Only, Self-Tapping: 312.74, 1.6mm Trocar 312.75, 3.2/1.6mm Drill Bit 312.76, 7.0/3.2mm Sleeve 312.77, 9.5/7.0mm Protection Sleeve 312.73, Parallel Wire Guide 312...

Synthes Wrist Fusion Set, Self-Tapping

• Manufacturer: Synthes

Synthes Wrist Fusion Set, Self-Tapping: (1) Sterilization Case (1) 323.26 2.7/2.0mm Universal Drill Sleeve (2) 310.19 2.0mm Drill Bit (2) 311.26 2.7mm Tap (1) 314.02 Small Hexagonal Screwdriver (1) 311.43 QC Hand...

Stryker Spine Navigation Set

• Manufacturer: Stryker

Stryker Spine Navigation Set: (1) 6001-35 Sterilization Tray (1) 6002-350-000 Thoracic Pedicle Feeler (1) 6002-300-000 Straight Pedicle Feeler (1) 6002-700-000 Awl (4) 6000-005-000 Universal Tracker (1) 6000-010-...

Smith & Nephew 4.0mm Cannulated Screw Set

• Manufacturer: Smith & Nephew

Smith & Nephew 4.0mm Cannulated Screw Set: (1) Sterilization Case (1) 11-6501 Obturator (1) 7111-7084 Screw Extractor (1) 11-7070 Screwdriver w/Countersink (1) 7111-7081 Holding Sleeve (1) 11-7079 4.0mm Cannulate...