Building Filters
2001 Takizawa TC-30
- Manufacturer: 滝沢
F-21iT 10-inch Hollow (Kitagawa B-210) Octagonal Turret, Push Cup, Touch Sensor, Mist Collector, Model Number TLSX1502
Handa, Japan
2007 Mori Seiki NL3000/700
- Manufacturer: 森精機
- Model: NL-3000/700
MSX850Ⅲ (Meldas) 12-inch hollow (Kitagawa B-212) 10-sided turret, push cup, touch sensor, cutting time 5167 hours, model number NL301GI0972
Handa, Japan
2019 OKUMA MULTUS B250II
- Manufacturer: Okuma
- Model: Multus B250
Maximum workpiece weight (including chuck weight) Cantilever support : 110 kg/ Double center support : 500 kg Travel X : 500 Y : 200 Z : 800 mm Chuck B-210 (Kitagawa hollow chuck) Touch center (for tools) Touch s...
Osaka, Japan
HORIBA STEC, Co., Ltd. D700T
- Manufacturer: Horiba
Best Performance Pressure Insensitive Mass Flow Module D700T is the best performance pressure-insensitive mass flow module designed for critical semiconductor manufacturing process. D700T adapted the HORIBA CRITE...
Kyoto, Japan
2001 Mazak SQT-200
- Manufacturer: Mazak
- Model: SUPER QUICK TURN 200
MAZ-640T 8-inch hollow (Kitagawa B208) 12-corner turret, push cup, touch sensor, chip controller (right hand), machine number 156478
Handa, Japan
2003 Mazak SQT-100M
- Manufacturer: Mazak
- Model: SUPER QUICK TURN 100
MAZ-640T 6-inch hollow (Kitagawa BB06) 12-corner turret with milling function Push cup with touch sensor Part catcher Machine No. 163995
Handa, Japan
2008 Mori Seiki NV4000 DCG
- Manufacturer: Mori Seiki
- Model: NV-4000DCG
With spissle, with spissle BBT40, with spindles, with spindles, with spindles, with spindles MSX-501Ⅲ, T:600*400mm T:600*400mm, 2APC(swivel type) 2APC(swivel type), Spindle: 12000rpm Spindle: 12000rpm, ATC: 60 AT...
Toyohashi, Japan
2010 FANUC α-T21iFa
- Manufacturer: Fanuc
FANUC 31i-A5,. S:(X)500*(Y)400*(Z)330mm,. A-axis: 0.001°indexing, -15°to +105°, B-axis: 0.001°indexing, ±9999.9999.999mm B-axis: 0.001°indexing, ±9999999.999°, T: 650*400mm, S: (X500*(Y)400*(Z)330mm T:650*400mm, ...
Toyohashi, Japan
2005 Mazak FH-8800
- Manufacturer: Mazak
- Model: FH 8800
120 ATC, B-axis 1/1000 deg. B-axis 1/1000 deg. Side-through, Touch sensor Touch sensor In case of any discrepancy between the description and the actual product, the actual product will be given priority.
Toyohashi, Japan
2006 Yamazaki Mazak PFH-4800
- Manufacturer: Mazak
- Model: PFH-4800
Mazatrol Fusion 640, BT40, ATC: 40 pieces, 1-degree indexing, Spindle through-coolant 8kgf, Spindle: 12000 rpm, Spindle: 560(X)*630(Y)*600(Z), Pallet: 400*400mm, 2 APC, Touch sensor, Chip conveyor *If there are a...
Toyohashi, Japan
HORIBA, Ltd. EV-140C
- Manufacturer: Horiba
Optical Emission Spectroscopy Etching End-point Monitor This emission analysis type end-point monitor is intended for end-point detection or plasma condition control in the plasma-based semiconductor thin-film pr...
Kyoto, Japan
HORIBA STEC, Co., Ltd. SEC-E Series
- Manufacturer: Horiba
Mass Flow Controller This general purpose mass flow controller has a reliable thermal sensor and solenoid valve, allowing you to achieve high-level control of gas flow. A versatile component, the mass flow contro...
Kyoto, Japan
HORIBA STEC, Co., Ltd. PV Series
- Manufacturer: Horiba
Piezo Actuator Valve The Piezo Actuator Valve PV Series consists of piezo actuator valves with metal diaphragms and metal O-rings. When combined with a pressure sensor or flow rate sensor and ratio control unit (...
Kyoto, Japan
HORIBA STEC, Co., Ltd. LF-F/LV-F Series
- Manufacturer: Horiba
Digital Liquid Mass Flow Meters / Controllers The LF-F and LV-F Series are digital liquid mass flow controllers using a Peltier element which cools the liquid rather than using the more common method of thermal h...
Kyoto, Japan
HORIBA STEC, Co., Ltd. SEC-Z700X Series
- Manufacturer: Horiba
Pressure Insensitive Mass Flow Controller The SEC-Z700X Series is equipped with reliable thermal sensors and a pressure insensitive function for stable flow rate control. The on-board pressure measurement reduces...
Kyoto, Japan