Used sensor in Sweden

Johnson Controls Pressure Control P77A

• Manufacturer: Johnson

Pressure switch (Pressure Control) Pressure range: 0.35–2.1 MPa (3.5–21 bar) | Variant: P77AAA 9351 | Rated current: 16(10)A | Voltage: 400V | Country: Netherlands | Fits: Refrigeration and industrial systems for...

Flowpack GNA -2002 #2574

• Manufacturer: GNA

Adjusted compressed air sensor. Installed new pressure gauge. Installed a new position sensor. Made a new protective plate underneath. Made a new protective plexiglass on top.

Skewer Miveg KW-01 from -2001 #2161

• Manufacturer: Miveg

Changed two air cylinders. Adjusted cadence sensor. Refurbished safety switch. Change the main switch.

2005 UVA Flash 250

• Manufacturer: UVA

Test run and adjusted welding times Works well Tube dimension: 156mm Welding width: 25cm Front cup missing, sensor bridged

Fryer 340x100 #2468

The machine has been tested. The belt is time-controlled Power: approx. 30 kW Current: approx. 80 Amp Belt width 45cm Dimensions: 340x100cm New switch New socket and lamp New temperature sensor

Cooling mixer PSS SM500 #2577

• Manufacturer: PSS

Renovated right mixer arm bearing. New sensor door switch. New blocks for air valves. Renovated air cylinders for lid lift. Made new drain plug for mixer. Runs quietly and nicely.

Cutter Kilia 65liter #2665

• Manufacturer: Kilia

New bearings and seals for the blade shaft. New bearings and seals for the engine scraper. New piston seals for the scraper. Replaced the mechanical tachometer with a new magnetic sensor. Vacuum chamber resealed....

SEPAMATIC SEPA 1200

• Manufacturer: Sepamatic

SEPAmatic 1200 separator is a belt separator with the highest efficiency and reliability. It was created mainly for the separation of poultry and red meat, where the force needed to process these raw materials m...

Log transporter

• Manufacturer: Swedabo

Log transporter is made with module frame and assembly units that are made symetrical, so that it can be swapped to opposite direction or mirrored on the site. Transporter can be extended - no mater how long it ...

2007 Makino E33

• Manufacturer: Makino
• Model: E33

Makino E33 Fanuc 310is Year: 2007-02 Object: 2462 "Vertical graphite machining center" Table: 850 x 500 mm Movement: X: 650 mm Y: 450 mm Z: 450 mm Maximum table load: 500 kg Spindle speed: 30,000 rpm Spindle tape...

2011 Mazak HC Nexus 6000-II

• Manufacturer: Mazak
• Model: Nexus

Mazak HC Nexus 6000-II Mazatrol Matrix Nexus Year: 2011-12 Object: 2654 Pallet: 500 mm x 500 mm Movement: X: 800 mm Y: 800 mm Z: 800 mm Max workpiece: Ø 900 mm x 1000 mmMax table load: 1000 kg Spindle speed: 10,0...

2021 DCM complete automatic filling system with heating tank and conveyor belt (candle production)

• Manufacturer: DCM

Unused, complete automatic filling system with heating tank and conveyor belt. manufacture Danish Candle Machinery. Intended for wax-based candle production, but can be used for many other types of filling work....