Used servo driven positioners

Cameron Automation 415A Quick Rip System

• Manufacturer: Cameron AutomationCameron AutomationCameron AutomationCameron AutomationCameron AutomationCantekCantekCantek

The Cameron Automation Quick Rip System offers the highest yield in the market due to its fenceless design, powerful “Opti-Rip" optimizing software, and multiple moving blade technology in a few different model s...

FANUC ARC MATE 100iC 6 AXIS MIG WELDING ROBOT WITH R-30iA CONTROL

• Manufacturer: Fanuc
• Model: ARC Mate 100iC

1-USED FANUC ARC MATE 100iC 6 AXIS MIG WELDING ROBOT WITH R-30iA CONTROL SERIAL NUMBER F102494 DATE OF MFG. 05/2010 STK#105317 ============================ SPECIFICATIONS WHILE OBTAINED FROM SOURCES DEEMED R...

GENESIS SYSTEM 3X DUAL TRUNION MIG WELDING CELL WITH 2 ARC MATE 100iC R-30iB ROBOTS

• Manufacturer: Genesis

1-USED GENESIS SYSTEM 3X DUAL TRUNION MIG WELDING CELL WITH 2 FANUC ARC MATE 100iC ROBOTS RUNNING ON R-30iB CONTROLLERS, PENDANTS, CABLES, ADJUSTABLE BETWEEN-CENTER TRUNION DISTANCES ROBOT SERIAL NUMBERS F1516...

GENESIS SYSTEM 3X DUAL TRUNION MIG WELDING CELL WITH 2 ARC MATE 100iC R-30iB ROBOTS

• Manufacturer: Genesis

1-USED GENESIS SYSTEM 3X DUAL TRUNION MIG WELDING CELL WITH 2 FANUC ARC MATE 100iC ROBOTS RUNNING ON R-30iB CONTROLLERS, PENDANTS, CABLES, ADJUSTABLE BETWEEN-CENTER TRUNION DISTANCES ROBOT SERIAL NUMBERS F1226...

FANUC ARC MATE 100iC 6 AXIS MIG WELDING ROBOT WITH R-30iB CONTROL

• Manufacturer: Fanuc
• Model: ARC Mate 100iC

1-USED FANUC ARCMATE 100iC 6-AXIS ROBOT WITH R-30iB CONTROL & LINCOLN I-400 POWER SUPPLY SERIAL NUMBER F151668 DATE OF MFG. 07/2014 STK#105387 ========================================= SPECIFICATIONS WHILE O...

NEWNES LINEAL EDGER OPTIMIZER

• Manufacturer: Newnes/McGehee

NEWNES LINEAL EDGER OPTIMIZER consisting of: -Left Hand -4" x 24" x 20 foot capacity -Bar type unscrambler -Angled Even ending rollcase c/w transfer chains -Turn/Pass Gate -Queuing Transfer deck c/w three (...

Cameron #415A- Quick Rip System

• Manufacturer: Cameron

The Quick Rip System will cut up to (10) Boards per minute with the highest possible yield on the Market The Quick Rip System offers the highest yield in the market due to its fenceless design, powerful “Opti-Ri...

20" Chip-N-Saw Line

- Infeed chain conveyor - Log turner - Single length infeed for 20' c/w holddown rolls and servo positioner for bed lift - 4 sided canter (bottom head (2 x 4 spline), side heads and top head c/w servo positioners...

4" x 30" Schurman Two Saw Top Arbor Edger System

• Manufacturer: Schurman

- 8' to 24' lumber - Bar type unscrambler - Prepositioning infeed table - fed from the left c/w - Board turners - Five (5) sets of prepositioning pins - Overhead pressrolls - Knurled & chromed bedrolls - Two (2) ...

NEWNES LINEAR EDGER C/W ROBO EDGER SYSTEM

• Manufacturer: Newnes/McGehee

NEWNES LINEAL EDGER OPTIMIZER consisting of: -Right Hand (lumber flow from left to right) -3" x 18" x 20 foot capacity (24" envelope) -Bar type unscrambler -Angled Even ending rollcase c/w transfer chains -T...

Industrial Robot With Robot Arm FD-V6S Mig Welding Robot With CNGBS Welding Positioners As Welding Machine

• Manufacturer: OTC

Industrial Robot With Robot Arm FD-V6S Mig Welding Robot With CNGBS Welding Positioners As Welding Machine Packing & Delivery One Industrial Robot With Robot Arm FD-V6S Mig Welding Robot With CNGBS Welding Positi...

KAWASAKI BA006L-A robotic welding cell

• Manufacturer: Kawasaki

was built in 2021. The system is designed for fully automatic MIG/MAG arc welding. All the necessary equipment and machinery with the best technical specifications are integrated inside an enclosed, fully ventila...

FANUC Arc Mate 100iC

• Manufacturer: Fanuc
• Model: ARC Mate 100iC
• Noise level: 80 dB

was built in 2019. The system configured for fully automatic MIG/MAG welding of workpieces is the perfect solution for the production of e.g. electrical cabinets, metal structures or agricultural equipment. The m...