Used sheet polishing machine

FMA Model RCS-20 UVAL UV Coating / Drying Machine w/ Vacuum Sheet Feeder Model DPF-20 – 071223171019D

Speed: up to 4.000 sheets-hour, but especially can also run at low speeds for gluing-coating purposes Details with Becker 4.25 vacuum/compressor automatic table level sensor, suctionwheel from above, air blow fro...

Falls Products Inc 131 D-Bur-R

• Manufacturer: Falls Products Inc

BRASS, GALVANIZED, & PERFORATED SHEET METAL Top & bottom edges: YES | Thickness capacity: 24 GAUGE TO 1/4" | Width capacity: 1/2" TO 48"+ | Length capacity: 4" TO 120"+ | Speed: 60 FPM | Gear motor: 1/4 HP | Abra...

1500mm (59.055") x 3mm (0.118") IMEAS Sheet to Sheet Polishing Line

General Specifications:Input Width: 600 (23.62") – 1500mm (59.05")Thickness: 0.4mm (0.0157") – 3.0mm (0.1181")Length: 1000mm (39.37") – 6000mm (236.22")Max Line Speed: 15m/minCoating Facility: YesOperating System...

2022 IMEAS Spa PMC-L-160

• Manufacturer: IMEAS Spa

Manufacture: - IMEAS Spa (Italy) - Model: PMC-L-160 Stainless Steel: - Width - 1600mm max (63") - Thickness - 0.4 - 4.0mm (.016" - .160") Polishing - Tooled for Mirror Finish Sheet feed operation Status: - Co...

86" x 0.90" Costa Sheet-to-Sheet Satin Finishing Machine

• Manufacturer: Costa

Specifications: Manufacturer: Costa Levigatrici S.P.A. Thickness Range: 0.02” - 0.90” (0.4 - 20 mm) Max Working Width: 86” (2200 mm) Installed Power: 133 kW Feeding Section Power: 3.95 HP (2.95 kW) Nominal ...

BAILEIGH BA9-1000404

• Manufacturer: Baileigh

BAILEIGH BB-4812 Finger Brake bends 12 gauge (or lighter) mild steel and 4 feet (48”) long. Up to 6” box depth, made possible by 3-piece design, is one of the largest available. Includes 11 hardened and polished ...

1999 Gloucester 3-Roll Cooling Stack – 60″ x 24″ – 1999 – For Sheet Extrusion

• Manufacturer: Gloucester

60″ Gloucester Cooling and Polishing Stand (3) Nominal 24″ Diameter Chrome Plated Rolls -Mounted in a 45 degree arrangement for down stack operation. Rolls are Pneumatically Actuated. Chrome rolls are via approxi...

7/32″ x 6′ WDM 400-6-6 #51499

• Manufacturer: WDM

Serial No. 60590-00 CATALOG SPECIFICATIONS: Rolls: EQUIPPED WITH: – 425-4 Control – auto-cycle PLC for high production – DRO for roll positions and length – Hardened & polished rolls – Roll Trim Control – Roll Sp...

2020 WALDEMAR B-4-60

• Manufacturer: Waldemar

WALDEMAR (NEW) MODEL B-4-60 INITIAL PINCH SHEET BENDING ROLL 14 GA X 60" CAPACITY ELECTRONICS TO NFPA 79 SPECIFICATIONS 230 VOLT, 3 PHASE, 2 HP TEFC MOTOR 120 VOLT CONTROL CIRCUIT 1045 STEEL ROLLS FEATURES - TOTA...

FACCIN 4EDL-2122

• Manufacturer: Faccin-Biko

FACCIN (NEW) MODEL 4EDL-2122 4-ROLL BENDING ROLL CAPACITY - 78.75 PLATE WIDTH - 9" TOP ROLL DIAMETER - 8" LOWER ROLL DIAMETER - 6" SIDE ROLLS DIAMETER - 69 TON BENDING FORCE ON TOP ROLL - 0-33 FPM INFINITELY VARI...

2025 WALDEMAR 430-6-5

• Manufacturer: Waldemar

WALDEMAR WMD (NEW) MODEL 430-6-5 DOUBLE PINCH PLATE BENDING ROLL RATED ROLLING CAPACITY - 1/4" MILD STEEL PLATE - 24" DIAMETER - 5' WIDE 6' NOMINAL TOP ROLL DIAMTER 0-22 FPM INFINITELY VARIABLE SPEED 5 HP TEFC MO...

Baileigh SH-10010 hydraulic metal shear

• Manufacturer: Baileigh
• Model: SH-10010
• Shearing length: 2,540 mm

Baileigh SH-10010 hydraulic metal shear Want to cut 8-foot sheets without trimming? This 100”-wide Hydraulic Metal Shear can handle most applications. Its ground and polished steel plate frame ensures quality cut...

Baileigh BB-4812 Finger Brake

• Manufacturer: Baileigh
• Model: BB-4812
• Capacity: 12 kg

Baileigh BB-4812 Finger Brake Built to offer years of service, the BB-4812 manual sheet metal bender is one of the most powerful manual Finger Breaks on the market. With its thick steel plate construction, this s...