Used sheet rolling machine

30" MEMCO 2 ROLL EMBOSSING MACHINE (14333)

• Manufacturer: Memco

30" MEMCO 2 ROLL EMBOSSING MACHINE (14333) , ROLL ZIE 17" DIAMETER BY 30" WIDE MEMCO 2 ROLL EMBOSSING MACHINE Stock # 14333 TOOLED FOR STUCCO PATTERN HYDRAULIC ROLL PRESSURE .. YES ** SPARE SET OF ROLLS AVAILABLE...

72" RED BUD "SM672" PEELER STRAIGHTENER - 3 OVER 4 ROLL DESIGN - CHAIN DRIVE

• Manufacturer: Red Bud

72" RED BUD PEELER/STRAIGHTENER SERIAL NO SSG83-60162E, MODEL SM672 EQUIPPED WITH: DRIVEN TOP & BOTTOM ENTRY & EXIT PINCH ROLLS 3 OVER 4 STRAIGHTENER ROLLS DESIGN HYDRAULIC MOTOR CHAIN DRIVE CATALOGUE SPECIFICATI...

2008 CAUFFIEL Heavy Duty 4-High Backed Up Plate Leveler

• Manufacturer: Cauffiel

CAUFFIEL Heavy Duty 4-High Backed Up Plate Leveler 62.5" x 4" Cauffiel, 1/4" - 4" Plate Thickness, 84" W Roll Face, (7) 11.75" Dia. Straightening Rolls (4 Over 3), Top and Bottom 11.5" Backup Rolls, One Set of Pi...

GFP 363TH 63″ Top Heat Pressure Sensitive Roll Laminator

Product Description General Info Stock #: 112250016 Brand: GFP Model: 363TH Serial #: 230636TH 109 Approx. Shipping Weight: 500 Lbs. Approx. Shipping Dimensions: 7′ L x 3′ W x 4′ 6″ H Skidding Fee: $150 Specifica...

7/16" X 12' WDM MODEL 100-11-12 HYDRAULIC PUNCH PYRAMID PLATE BENDING ROLL; S/N 60428-98, WDM 422

• Manufacturer: WDM

7/16" X 12' WDM MODEL 100-11-12 HYDRAULIC PUNCH PYRAMID PLATE BENDING ROLL; S/N 60428-98, WDM 422 CONTROLS, 12' X 11" DIAMETER ROLLS, 10 HP

Niagara 6-72 Plate Roll

• Manufacturer: Niagara
• Model: 6-72

Imperial Metric - Manual Adjustable Back Roller - 6 Inch Rollers Rated for 3/16 x 72 inch. plates. Manual roller adjustable back roller. End opens up for circles. 6 inch rollers. Forward and Reverse. 480 3ph. Can...

2007 Imcar Comac 4RH 30/7 12' x 1" (4) Roll Hydraulic Plate Roll ()

• Manufacturer: Comac

IMCAR COMAC 4RH 30/7 12' x 1" (4) ROLL HYDRAULIC PLATE BENDING ROLL

Heller S1550/4 Plate Roll

• Manufacturer: Heller

Imperial Metric Heller S1550/4 Plate Roll Maximum plate thickness: 1/4 inch | Maximum plate width: 5 feet | Top roll diameter: 6.7 inches | Bottom roll diameters: 6.7 inches and 7.1 inches | Drive motor: 5.5 HP |...

18" x .125" ROWE SERVO FEEDER Z21012D

• Manufacturer: Rowe

18" MAX WIDTH .010" - .125" THICKNESS CAPACITY 0 - 999.99 FEED LENGHTS RIGHT TO LEFT FEED BER-PP15 CONTROLLER ADJUSTABLE HEIGHT BASE CASCADE ROLLS PILOT RELEASE 460V

180 TON REIS SPOTTING PRESS Z23047A

• Manufacturer: Reis
• Model: TUS

60" STROKE 104" DAYLIGHT 76.75" X 86.75" BED 74" X 53" BETWEEN POST HY-PRESSURE 200 BAR PN PRESSURE 5 BAR ROLLING BOLSTER 1988 PRESSURE 2000 KN 440 V 84000 LBS APROX.

40 TON REIS SPOTTING PRESS Z25020

• Manufacturer: Reis
• Model: TUS-90

40 TON 24" STROKE 48" X 36" RAM 48" X 36" SLIDE OUT BED 40.5" DAYLIGHT 36.5" BETWEEN POST FLIP DOWN UPPER PLATTEN (BOOKING) HYDRUALIC TILT ON ROLL OUT TABLE UP ACTING 1974

No. 622 Combination Rotary Machine

• Manufacturer: Pexto

PEXTO forming machines included in this section offer a broad variety of shapes and capabilities in forming sheet metal for a combination of uses: beading, crimping, setting down, double seaming, turning, burring...

REIS TUS 180 OK-200 DOWN ACTING 4-POST HYDRAULIC SPOTTING PRESS Z23100YYY

• Manufacturer: Reis
• Model: TUS

60" STROKE 104" DAYLIGHT 76.75" X 86.75" BED 74" X 53" BETWEEN POST HY PRESSURE 200 BAR PN PRESSURE 5 BAR ROLLING BOLSTER T SLOTTED RAM AND BOLSTER 1988 PRESSURE 2000 KN 440 V 84,000 LBS APROX

CWP SMX-30H #0470524

• Manufacturer: CWP

SERIAL.......................................: SMX30H100 MODEL........................................: SMX30H CAPACITIES: @ 30"........................................: .020" - .156" @ 12"..........................

224 Ton Reis Hydraulic 4 Post Spotting Press z23026

• Manufacturer: Reis
• Model: TUS

Serial#04.023.00 Capacity: 224 Ton Table Size: 71" lr x 98" fb Swivel Platen Size: 71’ lr x 98” fb Stroke: 106” Dayllight Opening: 118” Distance Between Columns: 74” lr Table Capacity: 67,442 pound force ...