Used spindle

Trusted Seller
Cantek CT108 Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: Cantek
- Model: CT108
The Cantek CT108 Edge Sander has a 6” x 108” long belt with 39” wide platen for straight edge sanding and 3” drum for curve sanding. Table are adjustable up and down and can be angled for full belt utilization. T...
Apple Creek, OH
Trusted Seller
Rehnen R 300 Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: Rehnen
The R 300 is primarily used for workpieces with heights of up to 300 mm. The sanding unit with a height of 300 mm oscillates appr. 30 mm, hereby contributing to a long service life and high surface quality. A pne...
Apple Creek, OH
Trusted Seller
NAGEL 2BH16-330
- Manufacturer: Nagel
- Model: 2BH16-330
Stroke LH: 24" Stroke RH: 24" Distance Between Fixtures: 20"
Warren, MI
Trusted Seller
Ekstrom Carlson 112 Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: Carlson
8″ Edge Sander (Ekstrom Carlson) Hydraulic for belt and air for Ocalating
$2,750 USD
Baltic, OH
Trusted Seller
Fanuc Spindle Motor - Ailt 2/5000
- Manufacturer: Fanuc
4 Poles, Made In Japan Name: Spindle Motor | Arrival date: 09-19-2025 | Dimensions l x w x h (inches): 28 x 9 x 10 | Electrical: 3/50/60/200-230 | Weight (lb.): 87 | Available quantity: 1 | Make year: 2012
$280 USD
Euclid, OH
Trusted Seller
Fanuc Spindle Motor - Ailt 2/5000
- Manufacturer: Fanuc
4 Poles, Made In Japan Name: Spindle Motor | Arrival date: 09-19-2025 | Dimensions l x w x h (inches): 28 x 9 x 10 | Electrical: 3/50/60/200-230 | Weight (lb.): 87 | Available quantity: 1 | Make year: 2010
$280 USD
Euclid, OH
Trusted Seller
Fanuc Spindle Motor - Ailt 1/6000
- Manufacturer: Fanuc
4 Poles, Made In Japan Name: Spindle Motor | Arrival date: 09-19-2025 | Dimensions l x w x h (inches): 21 x 9 x 11 | Electrical: 3/50/60/200-230 | Weight (lb.): 127 | Available quantity: 1 | Make year: 2012
$280 USD
Euclid, OH
Trusted Seller
Larick 150 SERIES Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: Larick
The key to successful profile sanding is a combination of machine versatility, use of the correct abrasive medium, and a little patience and understanding. The results are a remarkable increase in consistency, qu...
Apple Creek, OH
Trusted Seller
CA Manufacturing 236 Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: CA Manufacturing
Sand chair bows, chair backs, chair posts, rocker rails, bed slats, table rims, etc. •Consistent Finish •Multiplies Productivity •2 Feeder Styles •Easy Setup & Operation •Multiplies Productivity •Adjustable Consi...
Apple Creek, OH
Trusted Seller
Ritter R933 Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: Ritter
The RITTER 933 Double Sided Oscillating Edge Belt Sander is unique from the other Ritter 6″ x 132″ machines, in that the entire platen assembly raises and lowers to give the operator use of the entire belt surfac...
Apple Creek, OH
Trusted Seller
Powermatic OES9138 Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: Powermatic
- Model: OES9138
The large 11-3/4″ x 48″ table on the OES9138 oscillating edge sander travels a full 8″ in vertical height to accommodate most woodworking pieces. It will also tilt negative 5° and out to positive 45°. The cast ir...
Apple Creek, OH
Trusted Seller
Ritter R258 Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: Ritter
The RITTER R258 Single Sided Oscillating Edge Belt Sander is unique from the other Ritter 6″ x 132″ machines, in that the entire platen assembly raises and lowers to give the operator use of the entire belt surfa...
Apple Creek, OH
Trusted Seller
Rehnen SK2 Sanders-Edge, Brush, Profile, Spindle
- Manufacturer: Rehnen
- Model: SK-2
The Rehnen SK2 edge-sanding machine offers besides the conventional straight sanding side an additional swung side on the rear as well as two radius sanding places of Ø 80 and 300 mm. Herby different kinds of san...
Apple Creek, OH
Trusted Seller
15" CLAUSING "1684" SINGLE SPINDLE BENCH-TYPE DRILL PRESS
- Manufacturer: Clausing/Colchester
15" CLAUSING "1684" SINGLE SPINDLE BENCH-TYPE DRILL PRESS - 20" x 30" Clausing Bench - Manual Down Feed - 4000 RPM Imperial Metric 15" CLAUSING SINGLE-SPINDLE BENCH-TYPE DRILL PRESS Serial No 512707, Model 1684, ...
$950 USD
Cincinnati, OH
Trusted Seller
Fanuc Spindle Motor - Ailt 1/6000
- Manufacturer: Fanuc
4 Poles, Made In Japan Name: Spindle Motor | Arrival date: 09-19-2025 | Dimensions l x w x h (inches): 21 x 9 x 11 | Electrical: 3/50/60/200-230 | Weight (lb.): 127 | Available quantity: 1 | Make year: 2012
$280 USD
Euclid, OH
Hille BKG2S Multi-spindle Drilling Machine
- Manufacturer: Hille
- Model: BKG2S
Good condition Hille BKG2S Multi-spindle Drilling Machines. Located in Italy and other countries. Click request price for more information.
Italy