Building Filters
- Trusted Seller
2012 TECHNO ISEL HDS SERIES 4X8 CNC ROUTER [RL-010831]
- Manufacturer: TECHNO ISEL
TECHNO ISEL HDS 4896 4 X 8: 48" X 96" CNC Router in front to back configuration with a 4-zone T-slot phenolic vacuum table. -- Axis travel: X-Axis 48", Y-Axis Travel 96" and Z-Axis travel is 9" with 7.5" clearanc...
- Trusted Seller
Horiba Advanced Techno HF-960M Concentration Monitor HF/HCl/NH3 Meter Working
- Manufacturer: Horiba
Horiba Advanced Techno HF-960M Concentration Monitor HF/HCl/NH3 Meter Working Inventory # A-2502 Model No: HF/HCl/NH3 METER CE Marked Made in Japan This Horiba Advanced Techno HF-960M Concentration Monitor HF/HCl...
$506 USDAlbuquerque, NM - Trusted Seller
Sanki Technos CR-712V Clean Robot No End Effector Hitachi M-712E Copper Working
- Manufacturer: Hitachi
“Removed from a Hitachi M-712E Shallow Trench Etcher System” Sanki Technos CR-712V Clean Robot No End Effector Hitachi M-712E Copper Working Model No: Clean Robot Removed from a Hitachi M-712E Shallow Trench Etch...
$804 USDAlbuquerque, NM - Trusted Seller
OKI Techno Power Systems PU4057-4443P501 Power Supply PCB Working Surplus
- Manufacturer: OKI
OKI Techno Power Systems PU4057-4443P501 Power Supply PCB Working Surplus Model No: YA4056-11472G2 This OKI Techno Power Systems PU4057-4443P501 is working surplus. The physical condition is good, but there are s...
$511 USDAlbuquerque, NM - Trusted Seller
DS TECHNO CO. KMC-QD-026 SMOOTH QUARTZ DISK Used Working
- Manufacturer: KMC
DS TECHNO CO. KMC-QD-026 SMOOTH QUARTZ DISK Used Inventory # A28409 This DS TECHNO CO. KMC-QD-026 is used working surplus. The physical condition is good, but there are signs of previous use and handling. Specifi...
$2,001 USDAlbuquerque, NM - Trusted Seller
Sanki Technos CR-712T-A Wafer Transfer Clean Robot Hitachi M-712E Copper Working
- Manufacturer: Hitachi
“Some units may be branded as Hitachi or Sanki Technos but they are mechanically similar.” Sanki Technos CR-712T-A Wafer Transfer Clean Robot Hitachi M-712E Copper Exposed Working Spare Model No: Clean Robot Copp...
$905 USDAlbuquerque, NM - Trusted Seller
Sanki Technos CR-712VX Wafer Clean Robot No End Effector Hitachi M-712E Working
- Manufacturer: Hitachi
“The unit has a small ding to the mounting ring and some cosmetic scuffs to the body and the lower arm (see photos).” Sanki Technos CR-712VX Wafer Clean Robot No End Effector Hitachi M-712E Working Model No: Clea...
$911 USDAlbuquerque, NM - Trusted Seller
Sanki Technos CR-712T-A Clean Robot w/End Effector Hitachi M-712E Copper Working
- Manufacturer: Hitachi
““Some units may be branded as Hitachi or Sanki Technos but they are mechanically similar.” The unit has some scuffs on the body covers (see photos) but this should not interfere with normal operation.” Sanki Tec...
$901 USDAlbuquerque, NM - Trusted Seller
Sanki Technos CR-712T-AC Clean Robot w/End Effector Hitachi M-712E Cu Working
- Manufacturer: Hitachi
“Removed from a Hitachi M-712E Shallow Trench Etcher System” Sanki Technos CR-712T-AC Clean Robot w/End Effector Hitachi M-712E Copper Working Model No: Clean Robot Removed from a Hitachi M-712E Shallow Trench Et...
$904 USDAlbuquerque, NM - Trusted Seller
OKI Techno Power Systems JAPMC-PS2300B1-E Power Supply PCB MP2300 Working
- Manufacturer: OKI
OKI Techno Power Systems JAPMC-PS2300B1-E Power Supply PCB MP2300 Working Model No: MP2300 This OKI Techno Power Systems JAPMC-PS2300B1-E is working surplus. The physical condition is good, but there are signs of...
$561 USDAlbuquerque, NM - Trusted Seller
OKI Techno E2U008/PWR Power Supply PCB TEL Tokyo Electron E239-000069-11 Working
- Manufacturer: OKI
OKI Techno E2U008/PWR Power Supply PCB TEL Tokyo Electron E239-000069-11 Working This OKI Techno E2U008/PWR is working surplus. The physical condition is good, but there are signs of previous use and handling. Sa...
$611 USDAlbuquerque, NM - Trusted Seller
OKI Techno Power Systems YA4056-11395G2 Power Supply TEL 2L80-001806-13 Working
- Manufacturer: OKI
“This new unit was removed from an evaluation system with very little to no prior use and is in like new condition, but may show wear from the deinstallation procedure. Does not include documentation. Removed fro...
$1,410 USDAlbuquerque, NM - Trusted Seller
2020 TECHNO CNC SYSTEMS CO2 LASER CUTTER CNC LASER - CO2 [LW-010460]
- Manufacturer: TECHNO CNC SYSTEMS
TECHNO CNC SYSTEMS CO2 LASER CUTTER Machine Equipped with: -- All-steel construction -- Precision linear rails and bearings -- Water chiller -- State-of-the-art CO2 laser -- Micro stepper controller -- Easy-to-us...
United States 
Techno Aoyama Vibratory Feeder Bowl V2113
- Manufacturer: Techno Aoyama
Hp: 0 | Volts: 100/115V | Phase: 1 | Weight: 250
$750 USDOceanside, CA
Meiji Techno BM
- Manufacturer: Meiji Techno
Item was recently removed from working service and is in excellent working order. Item will come with a 30 Day Warranty. Cosmetically in good condition showing minor scuffs / scratches / blemishes from previous u...
$124 USDRancho Cordova, CA
Biesse Techno FDT Boring, Dowel inserting, Gluing
- Manufacturer: Biesse
- Model: Techno FDT
Good condition Biesse Techno FDT Boring, Dowel inserting, Gluings manufactured in 2004. Located in Italy and other countries. Click request price for more information.
Italy
