Used thread cutting machine

300 GALLON PROCESSOR TANK

• Manufacturer: WILL-FLOW CORP.

300 GALLON PROCESSOR TANK. MANUFACTURER WILL-FLOW CORP. SERIAL 379773-2, 37977-3. , CYLINDRICAL/CONICAL, FLAT W/ LID TOP , CONE BOTTOM , JACKET, 304 SS EXTERIOR, 2.5" THREADED BEVEL SEAT OUTLET. DOUBLE MOTION SWE...

Baileigh PH-28HD-VS Power Hammer

• Manufacturer: Baileigh
• Model: PH-28HD-VS

Baileigh PH-28HD-VS Power Hammer The PH-28HD-VS power hammer can hit harder and move metal faster than most hammers its size. This USA-made machine lets you shape multiple sheets at once, then planish them out. *...

H2O JET END BELL ASSEMBLY 60K LEFT 301001-1-L

“OPENED FOR PICTURES” H2O JET END BELL ASSEMBLY 60K LEFT 301001-1-L 60K PSI 5/16" THREADED SIDE PORTS 3" THREADED PORT 6/8" SMOOTH OPEN PORTS 15 LBS 5"X3-1/8"X5" MT-25816-SK100-(2)-E

Thread cutting machine by Rothenberger – Supertronic 2SE 37153

• Manufacturer: Rothenberger

Threading machine, pipe thread cutter Manufacturer: Rothenberger, thread cutting machine type Supertronic 2SE without thread cutting head | Pipe size: 1/2 to 2 inches | Spindle bore: Ø 68 mm | Operating voltage: ...

2024 Rino Hardness type for printing presses thin-cutting machines etc.

• Manufacturer: Rino

Product Description: Cemented carbide roller used on the stretch reducing mill for bar, thread steel bar and common wire, with the durability 10 to 20 times higher compared to common steel roller. The surface qu...

Thread cutting machine from REMS - for cutting tips 25780

• Manufacturer: Rems

Thread cutting machine, pipe thread cutter -without tool

Thread cutting machine from GF - up to 2 inches 8677

• Manufacturer: GF

Threading machine, pipe thread cutter For: Tube size max. 2 inch | Schneidbacken: 1″ inch | Drive: over 3 gears | Dimensions: 500/360 / H240 mm | Mass: 80 | Internal storage: 227500

Thread cutting machine from HAZAKO - up to 2 inches 5621

• Manufacturer: ZOLL

Threading machine with Stehler jaws, threading head

Thread cutting machine from GF - up to 2 inches 8067

• Manufacturer: GF

Threading machine, pipe thread cutter For: Tube size max. 2 inch | Schneidbacken: 1″ inch | Drive: over 3 gears | Dimensions: 550/360 / H240 mm | Mass: 80 | Internal storage: 3A10105

Ridgid Thread Cutting Machine – 535 1/4″ to 2″ 35750

• Manufacturer: Ridgid

Threading machine, pipe thread cutter Manufacturer: Ridgid, thread cutting machine type 535 | Pipe size: 1/8 to 2 inches | Spindle bore: Ø 64 mm | Operating voltage: 230 volts | Dimensions: 1080/700/H1140 mm | Ma...

MANNAIONI 4Y-700 Thread-cutting machine

• Manufacturer: Mannaioni
• Threading length: 400 mm

With hydraulic tailstock Max. diameter: 150 mm | Max. pitch: 8 | Thread length: 400 mm | Distance between centres: 700 mm | Power: 4,4 Kw | Weight: 1800 Kg | Overall dimensions: 2300 x 900 x 1300 mm

THREAD CUTTING MACHINE THYSSEN ULTROMAT 2000 -

• Manufacturer: Thyssen
• Model: ULTROMAT 2000

-Thread dia. 16 mm -Threading length 90 mm -Thread pitch 1.25 mm -Table-size 390 x 300 mm Distance spindle/table max. 630 mm -Throat 340 mm -Spindle taper MT B 22 -Turning speed range 400 / 560 / 800 U/min -Quill...