Used thread cutting

SHARP 22120B

• Manufacturer: Sharp
• Model: 22120B
• Spindle bore: 114.3 mm

This model has 4.5” spindle bore, D1-11 Camlock spindle nose, 16” wide bed, 15 HP motor offers great capacity for large work piece. The low speed goes down to 10 rpm offering enough torque for heavy cutting. SPEC...

SHARP 2240B

• Manufacturer: Sharp
• Model: 2240B
• Spindle bore: 114.3 mm

This model has 4.5” spindle bore, D1-11 Camlock spindle nose, 16” wide bed, 15 HP motor offers great capacity for large work piece. The low speed goes down to 10 rpm offering enough torque for heavy cutting. SPEC...

1988 Giddings & Lewis 84" CNC Vertical Boring Mill

• Manufacturer: Giddings & Lewis

Features: Giddings & Lewis 8000 CNC Control Ram W/ 12-Station Automatic Tool Change Side Head Equipped With: Giddings & Lewis 8002L CNC Controls 84" T-Slotted Table W/ 4-Top Jaws Ram W/ 12-Station Automatic Tool ...

2009 Mitsubishi FA20S Advance

• Manufacturer: Mitsubishi
• Model: FA20S ADVANCE

Equipped With: 4-Sided Table (one-piece) Auto Wire Threading Chiller Fast Fill Pump 10 KG (22 lb) Wire Spool Hand Pendant Controller Adaptive Control (protects against wire breaks/accuracy losses/finish disruptio...

SHARP 26100B

• Manufacturer: Sharp
• Model: 26100B
• Spindle bore: 114.3 mm

This model has 4.5” spindle bore, D1-11 Camlock spindle nose, 16” wide bed, 15 HP motor offers great capacity for large work piece. The low speed goes down to 10 rpm offering enough torque for heavy cutting. SPEC...

SHARP 2280B

• Manufacturer: Sharp
• Model: 2280B
• Spindle bore: 114.3 mm

This model has 4.5” spindle bore, D1-11 Camlock spindle nose, 16” wide bed, 15 HP motor offers great capacity for large work piece. The low speed goes down to 10 rpm offering enough torque for heavy cutting. SPEC...

SHARP 2260B

• Manufacturer: Sharp
• Spindle bore: 114.3 mm

This model has 4.5” spindle bore, D1-11 Camlock spindle nose, 16” wide bed, 15 HP motor offers great capacity for large work piece. The low speed goes down to 10 rpm offering enough torque for heavy cutting. SPEC...

SHARP 22160B

• Manufacturer: Sharp
• Model: 22160B
• Spindle bore: 114.3 mm

This model has 4.5” spindle bore, D1-11 Camlock spindle nose, 16” wide bed, 15 HP motor offers great capacity for large work piece. The low speed goes down to 10 rpm offering enough torque for heavy cutting. SPEC...

Stainless Steel Platform 40" X 128.5" #17050

• Manufacturer: Stainless Steel Platform

All stainless steel heavy duty platform, 128. 5" long x 40" wide x 20. 5" high as shown, mounted on 1. 5" diameter thread legs allowing 3" additional height as full extension and 1" lower at minimum height, 33-3"...

SHARP 2680B

• Manufacturer: Sharp
• Model: 2680B
• Spindle bore: 114.3 mm

This model has 4.5” spindle bore, D1-11 Camlock spindle nose, 16” wide bed, 15 HP motor offers great capacity for large work piece. The low speed goes down to 10 rpm offering enough torque for heavy cutting. SPEC...

O-M TMD-55/60N 216" CNC Vertical Boring Mill (1999)

Imperial Metric 216" O-M CNC Model TMD-55/60N Vertical Boring Mill (1999) Additional Video: Additional Video: Additional Video: Additional Video: Additional Video: Additional Video: ...

SHARP 2660B

• Manufacturer: Sharp
• Model: 2660B
• Spindle bore: 114.3 mm

This model has 4.5” spindle bore, D1-11 Camlock spindle nose, 16” wide bed, 15 HP motor offers great capacity for large work piece. The low speed goes down to 10 rpm offering enough torque for heavy cutting. SPEC...

SHARP 26160B

• Manufacturer: Sharp
• Model: 26160B
• Spindle bore: 114.3 mm

This model has 4.5” spindle bore, D1-11 Camlock spindle nose, 16” wide bed, 15 HP motor offers great capacity for large work piece. The low speed goes down to 10 rpm offering enough torque for heavy cutting. SPEC...

SHARP 22100B

• Manufacturer: Sharp
• Model: 22100B
• Spindle bore: 114.3 mm

This model has 4.5” spindle bore, D1-11 Camlock spindle nose, 16” wide bed, 15 HP motor offers great capacity for large work piece. The low speed goes down to 10 rpm offering enough torque for heavy cutting. SPEC...