Used thread rollers

- 576 listings found
Sort by Price: Low to High | High to Low
  • No price
    Wixom, MI, USA
  • KINEFAC MC-6 CYLINDRICAL THREAD ROLLER

    • Manufacturer: KINEFAC
    • Weight: 3,000 LBS

    Equipped with: tank electrics: 480v | approx. size: 4'l x 6'w x 6'h | approx. weight: 3,000 lbs | standard die gap: 142mm | die diameter range: 85mm - 101mm | center distance range: 47mm - 76mm | standard spindle...

    No price
    Ivyland, PA, USA
  • #10 MANVILLE HAND FEED THREAD ROLLER

    • Manufacturer: MANVILLE

      Equipped with: with adjustable pitman electrics: 220v/60hz/3 phase

      No price
      Ivyland, PA, USA
    • WATERBURY FARREL Mdl# 40 HEAVY FRAME HAND FEED THREAD ROLLER

      • Manufacturer: Waterbury

        One used waterbury farrel model #40 heavy frame hand feed thread roller, serial no.220052-317 5/8" thread diameter 4 1/2" thread length 50 pieces per minute equipped with: adjustable pitman, bottom stop and ...

        No price
        Newark, NJ, USA
      • WATERBURY FARREL Mdl# 60 HEAVY FRAME HAND FEED THREAD ROLLER

        • Manufacturer: Waterbury

          One used waterbury farrel model #60 heavy frame hand feed thread roller 1" thread diameter 5" thread length 30 spm cp&p 20 hp 220 440v ac motor weight 20,000 lbs.

          No price
          Newark, NJ, USA
        • REED MODEL A22B THREAD ROLLER

          • Manufacturer: PPM

            Serial ...................... 1854 model ....................... a22 capacity: infeed standard equipment ... 1-1/4" - 2-5/8" thread lengths: infeed standard equipment ... up to 1/2" standard die speeds ...........

            No price
            Holland, OH, USA
          • #0 HARTFORD 0-400 THREAD ROLLER

            • Manufacturer: Hartford

              Equipped with: 18" midwest vibe hopper a/c vari drive electric feed off/on e-manual

              No price
              Ivyland, PA, USA
            • DOUBLE END THREAD ROLLER

                  Equipped with: magazine hopper feed adjustable for parts from 6" - 36"

                  No price
                  Ivyland, PA, USA
                • KINEFAC Mdl# MC-25, 2 DIE CYLINDRICAL THREAD ROLLER

                      One used kinefac model mc-25 2 die cylindrical thread roller, serial no 1253 4-70mm thread diameter 6mm pitch 320 kn die pressure 70mm spindle shaft diameter 125mm die depth 12 deg. spindle skew for through fe...

                      No price
                      Newark, NJ, USA
                    • REED No. B111 THREAD ROLLER

                      • Manufacturer: PPM

                        Work diameters ......... infeed to 2" thru feed to 3/4" thread lengths ......... infeed to 1-7/8" thru feed no limit production rates ....... in feed 8 - 35 ppm ...

                        No price
                        Newark, NJ, USA