Used v tech

LOT OF 50 MACK TECH A100024 18 AWG WIRE CONNECTOR T205022

• Manufacturer: Mack

105C 600V Extra Information Brand: MACK TECH MPN: A100024 Lot Q: 50 Shipping Weight: 12 LBS Shipping Dimensions: 16 (in) × 10 (in) × 3 ...

2017 Raymond 4750‑C50L – CSA Certified | Brampton ON | 5,000 lb Capacity | 259" Quad Mast | 4‑Wheel Electric | Cushion Tire | Clamp‑Ready | Battery Optional

• Manufacturer: Raymond
• Hours: 10,500 h
• Lifting capacity: 2,267.96 kg

CSA 4-Wheel Electric Forklift | Raymond 4750-C50L | 5,000 lb | 259” Quad Mast | Clamp-Ready | Brampton ON Professionally reconditioned and CSA/MOL certified for indoor warehouse operations. This 2017 Raymond 475...

Lot of 8 Nippon Chemi-Con 130000UF 15V 528991P1(S6LLST11227)

*Handling times for freight shipments average 5 days, but may vary depending on size, weight, location, and current trucking conditions. This does not include shipping time.* Item Dimensions - L X W X H - 3X3X9 I...

O'HARA

• Manufacturer: O’Hara

Used Approximately 1 Cubic Foot Stainless Steel V-Blender Capacity: 1 cubic foot Manufacturer: O'hara Tech Includes controls and clear plastic enclosure

iCX Nomadics SensiQ SPR Technology Model 100 Surface Plasmon Resonance

• Manufacturer: iCS Nomadics

“This unit was power tested with another cable that we had. No power cable or syringes are included. This would still make a good parts or rebuild unit for a tech who has knowledge of it.” iCX Nomadics SensiQ SPR...

2020 Hewescraft Ocean Pro 220

• Manufacturer: Hewescraft

2020 Hewescraft Boats Ocean Pro powered by a Honda 225 HP engine ready to hit the water! Stock #429035 ANY and ALL offers will be put in front of our seller! Submit your offer today! Hewscraft Ocean Pro 2400 HT...

2011 Disposal Water Management System HOT WATER VAPOR PROCESS PACKAGE

• Manufacturer: PETRO TECH

Includers: - PUMP, RECIP, WATER FEED - CAT PUMPS, model 1050, 2011, 15.0 hp, 2,200 PSI, 1,150 RPM - MOTOR, WATER FEED PUMP - BALDOR, S/N Z1011170066, 2011, 60.0 Hz, 3 phases, 15.0 hp, 230 V

2020 Toyota 8FBCU25 | 5,000 lb | 189” Lift | 4‑Wheel Electric Sit‑Down | CSA | Brampton ON

• Manufacturer: Toyota
• Model: 8FBCU25
• Horsepower: 20 hp
• Hours: 4,500 h

This CSA‑certified 2020 Toyota 8FBCU25 is a high‑performance 4‑wheel electric counterbalance forklift built for indoor warehouse operations, dock work, and high‑capacity pallet handling. With a 5,000 lb capacity,...

2013 SCM Tech Z1

• Manufacturer: SCM / SCMI
• Model: Tech Z1

Hours: 7290 | Documentation available: Yes | Ce marking present: Yes | Ce certificate available: No | Number of milling spindles [pcs.]: 1 ...

Niro-Tech Z arm RXZ-2000

• Manufacturer: Niro-Tech Z arm

The Niro-Tech ‘’Z’’ arm mixers are a top-quality two-shafts tilt mixers. The mixing process is carried out by two “Z” type agitators, placed at the same heights. Mixing occurs by rotating both shafts at the same...

SCM Tech Z25 I CNC Machining Center

• Manufacturer: SCM / SCMI
• Model: Tech Z25

We hereby offer this used SCM Tech Z25 CNC machining center from 2005, located in Belgium. This robust machine offers a spacious working area measuring 2500 x 918 mm, providing ample space for tackling a wide ran...

2006 THERMWOOD CS 45-510 CNC ROUTER (ATC & BORING) [RC-012386]

• Manufacturer: Thermwood

THERMWOOD CS 45-510 CNC Router with ATC & BORING: 5' x 10' Moving Gantry with: Machined aluminum table; single-zone acrylic vacuum plenum; manual material stops around the table perimeter. -- Equipped with: (1) 1...