Used variable speed in Berlin, Germany

WINTER DOUBLE END PROFILER INDUSTRY SERIES 6030H

Technical data: - 6 aggregates - working width min./max. 300 - 3000 mm - working height min./max. 10 - 120 mm - feed infinitely variable 6 - 36 m/min - motor feed 4,0 kW - motor width adjustment 0,75 kW - total p...

MicroTime 200 STED

Complete confocal STED system based on inverted microscope body Optical resolution below 50 nm Excitation at 640 nm and optionally with additional lasers at 595 nm and 660 nm Up to 6 truly parallel detection chan...

WINTER four side planer - moulder TIMBERMAX 5-26 with (5th shaft down)

- Planing width 20 - 260 mm - planing height 8 - 180 mm - 5 spindles - spindle Ø 50 mm - speed 6000 rpm - feed speed infinitely variable 6 - 30 m/min - lower horizontal shaft max. tool Ø 110 - 145 mm - right vert...

WINTER double-sided planer DUOMAX 1020 CE

- max. planing width 1020 mm - min. / max. planing height 10 / 200 mm - min. workpiece length 310 mm - max. chip removal upper shaft 5 mm - max. chip removal lower shaft 5 mm - speed cutter 5000 rpm - Spiral cutt...

WINTER four-side planer and moulder TIMBERMAX 6-26 TT

Technical data: - Planing width 30 - 260 mm - planing height 10 - 200 mm - min. workpiece length 840 mm (single) / 280 mm (with series) - 6 spindles - spindle Ø 50 mm - speed 6500 rpm - feed speed infinitely vari...

WINTER four-side planer and moulder TIMBERMAX 6-23 TT

Technical data: - Planing width 20 - 230 mm - planing height 8 - 160 mm - min. workpiece length 840 mm (single) / 280 mm (with series) - 6 spindles - spindle Ø 40 mm - speed 6800 rpm - feed speed infinitely varia...

WINTER four-side planer - moulder TIMBERMAX 5-23 with mobile spindle

- Planing width 20 - 230 mm - planing height 8 - 160 mm - 5 spindles - spindle Ø 40 mm - speed 6000 rpm - feed speed infinitely variable 5 - 30 m/min - Dressing shaft, bottom max. tool Ø 145 mm - Right vertical s...

WINTER four-side planer and moulder TIMBERMAX 7-23 RR TT

Technical data: - Planing width 20 - 230 mm - planing height 8 - 160 mm - min. workpiece length 720 mm (single) / 280 mm (with series) - 7 spindles - spindle Ø 40 mm - speed 6800 rpm - feed speed infinitely varia...

WINTER four-side planer and moulder TIMBERMAX 6-23 RR

Technical data: - Planing width 20 - 230 mm - planing height 8 - 160 mm - min. workpiece length 720 mm (single) / 280 mm (with series) - 6 spindles - spindle Ø 40 mm - speed 6800 rpm - feed speed infinitely varia...

2014 John Deere 8335 R AUTOPOWER + TWIN TIRES

• Manufacturer: John Deere
• Model: 8335R
• Horsepower: 267.8 horsepower
• Hydraulic flow rate: 227.12470704 liters per minute

Rotating beacon, rear top link, automatic tow bar, K80 in the carriage, load weights, complete twin tires, JD Starfire 3000 steering system, pressureless rear return Speed: 40 km/h Ball coupling (K80), all-wheel ...

2018 John Deere 6230R - Command Pro

• Manufacturer: John Deere
• Model: 6230R
• Horsepower: 280 horsepower
• Hours: 7,325 hour

Hp (kw): 230 HP (169 kW) | Operating hours: 7325 Hours | Drive: Four-wheel drive | Work searchlight: Yes | On-board computer: Yes | Compressed air brake system: Yes | Electronic lifting gear control: Yes | Hydra...

2022 John Deere 7R 310

• Manufacturer: John Deere
• Model: R310
• Horsepower: 310 horsepower
• Cutting width: 3.11 meter

Hp (kw): 310 HP (228 kW) | Operating hours: 1458 Hours | Drive: Four-wheel drive | Hitch: Automatic | Work searchlight: Yes | On-board computer: Yes | Compressed air brake system: Yes | Electronic lifting gear c...

2021 Caterpillar 302 CR / WARRANTY / INCL. 2X BUCKETS

• Manufacturer: Caterpillar
• Model: 302 CR
• Horsepower: 21.05404679484778 horsepower
• Operating weight: 2,262.063304 kilogram

Warranty until September 29, 2026 or max. 1,000 operating hours, operating weight: approx. 2,130 kg (depending on equipment), three-cylinder diesel engine, type CAT C1.1 (water-cooled), displacement: 1.1 l, power...

2023 Eschlböck Biber BIBER 6 3-PUNKT-ANBAU #300128692

• Manufacturer: Eschlböck

BIBER 6 3-POINT LINKAGE Eschlböck 3-point attachment with sieve 3 cm, Cat 3 Weight (standard equipment) approx. 2450 kg Standard equipment Chipping system: Drum chipper Wood diameter up to 32 cm Feed opening 32 x...

2018 CLAAS Axion 950

• Manufacturer: Claas
• Model: AXION 950
• Horsepower: 410.3527591862051 horsepower
• Hours: 2,960 hour

Hp (kw): 410 HP (302 kW) | Operating hours: 2960 Hours | Drive: Four-wheel drive | Hitch: Automatic | Work searchlight: Yes | On-board computer: Yes | Compressed air brake system: Yes | Electronic lifting gear c...