Used variable speed in 14 Brandenburg, Germany

MicroTime 200 STED

Complete confocal STED system based on inverted microscope body Optical resolution below 50 nm Excitation at 640 nm and optionally with additional lasers at 595 nm and 660 nm Up to 6 truly parallel detection chan...

WINTER double-sided planer DUOMAX 1020 CE

- max. planing width 1020 mm - min. / max. planing height 10 / 200 mm - min. workpiece length 310 mm - max. chip removal upper shaft 5 mm - max. chip removal lower shaft 5 mm - speed cutter 5000 rpm - Spiral cutt...

WINTER four side planer - moulder TIMBERMAX 5-26 with (5th shaft down)

- Planing width 20 - 260 mm - planing height 8 - 180 mm - 5 spindles - spindle Ø 50 mm - speed 6000 rpm - feed speed infinitely variable 6 - 30 m/min - lower horizontal shaft max. tool Ø 110 - 145 mm - right vert...

WINTER four-side planer and moulder TIMBERMAX 6-26 TT

Technical data: - Planing width 30 - 260 mm - planing height 10 - 200 mm - min. workpiece length 840 mm (single) / 280 mm (with series) - 6 spindles - spindle Ø 50 mm - speed 6500 rpm - feed speed infinitely vari...

WINTER four-side planer and moulder TIMBERMAX 6-23 TT

Technical data: - Planing width 20 - 230 mm - planing height 8 - 160 mm - min. workpiece length 840 mm (single) / 280 mm (with series) - 6 spindles - spindle Ø 40 mm - speed 6800 rpm - feed speed infinitely varia...

WINTER four-side planer - moulder TIMBERMAX 5-23 with mobile spindle

- Planing width 20 - 230 mm - planing height 8 - 160 mm - 5 spindles - spindle Ø 40 mm - speed 6000 rpm - feed speed infinitely variable 5 - 30 m/min - Dressing shaft, bottom max. tool Ø 145 mm - Right vertical s...

WINTER four-side planer and moulder TIMBERMAX 7-23 RR TT

Technical data: - Planing width 20 - 230 mm - planing height 8 - 160 mm - min. workpiece length 720 mm (single) / 280 mm (with series) - 7 spindles - spindle Ø 40 mm - speed 6800 rpm - feed speed infinitely varia...

WINTER four-side planer and moulder TIMBERMAX 6-23 RR

Technical data: - Planing width 20 - 230 mm - planing height 8 - 160 mm - min. workpiece length 720 mm (single) / 280 mm (with series) - 6 spindles - spindle Ø 40 mm - speed 6800 rpm - feed speed infinitely varia...

2002 FENDT 716 COM 1 | ONLY 7561 HOURS!

• Manufacturer: Fendt
• Model: 716 VARIO
• Horsepower: 163 horsepower
• Hydraulic flow rate: 110 liters per minute

Rotating beacon, front top link, automatic tow bar, K80 fixed attachment, pressureless rear return Speed: 40 km/h All-wheel drive, continuously variable transmission, suspended front axle, front linkage (with top...

2014 John Deere 8335 R AUTOPOWER + TWIN TIRES

• Manufacturer: John Deere
• Model: 8335R
• Horsepower: 267.8 horsepower
• Hydraulic flow rate: 227.12470704 liters per minute

Rotating beacon, rear top link, automatic tow bar, K80 in the carriage, load weights, complete twin tires, JD Starfire 3000 steering system, pressureless rear return Speed: 40 km/h Ball coupling (K80), all-wheel ...

2024 CLAAS Axion 960 TT Cmatic + GPS RTK

• Manufacturer: Claas
• Model: AXION 960
• Horsepower: 445 horsepower
• Hours: 610 hour

Hp (kw): 439 HP (323 kW) | Operating hours: 610 Hours | Hitch: Automatic | Work searchlight: Yes | On-board computer: Yes | Electronic lifting gear control: Yes | Hydraulic front equipment: Yes | Sprung front ax...

2016 CLAAS Axion 920 Cmatic + GPS S7 Egnos

• Manufacturer: Claas
• Model: AXION 920
• Horsepower: 350 horsepower
• Hours: 8,985 hour

Hp (kw): 321 HP (236 kW) | Operating hours: 8985 Hours | Drive: Four-wheel drive | Hitch: Automatic | On-board computer: Yes | Compressed air brake system: Yes | Electronic lifting gear control: Yes | Sprung fro...

2025 CLAAS Axion 950 DEMO GPS RTK

• Manufacturer: Claas
• Model: AXION 950
• Horsepower: 410.3527591862051 horsepower
• Hours: 610 hour

Hp (kw): 410 HP (302 kW) | Operating hours: 610 Hours | Drive: Four-wheel drive | Hitch: Automatic | Work searchlight: Yes | On-board computer: Yes | Compressed air brake system: Yes | Hydraulic front equipment:...

2018 John Deere 6230R - Command Pro

• Manufacturer: John Deere
• Model: 6230R
• Horsepower: 280 horsepower
• Hours: 7,325 hour

Hp (kw): 230 HP (169 kW) | Operating hours: 7325 Hours | Drive: Four-wheel drive | Work searchlight: Yes | On-board computer: Yes | Compressed air brake system: Yes | Electronic lifting gear control: Yes | Hydra...

2021 CLAAS Axion 870 Cmatic + GPS RTK

• Manufacturer: Claas
• Model: AXION 870
• Horsepower: 295 horsepower
• Hours: 2,205 hour

Hp (kw): 284 HP (209 kW) | Operating hours: 2205 Hours | Drive: Four-wheel drive | Hitch: Automatic | On-board computer: Yes | Compressed air brake system: Yes | Electronic lifting gear control: Yes | Sprung fro...