Used variable speed in Lucerne, Switzerland

Welch / Ilmvac LVS105T-10ef speed-controlled che

• Manufacturer: Welch

The like-new Welch/Ilmvac LVS105T-10ef is a variable-speed, chemical-resistant vacuum pump with an integrated controller and separator, suitable for ultimate vacuum levels of 1.2 mbar and 2 mbar. Specifically de...

1972 KAISER 60 P Ref No: 42789

• Manufacturer: Kaiser

Object: 42789 | Total force (nominal): 60 to | Slide adjustment: 70 mm | Stroke min.: 11 mm | Stroke max.: 60 mm | Variable speed: yes | Stroke rate (min.): 60 /min | Stroke rate (max.): 240 /min | Strip f...

DRILLING AND MILLING MACHINE “CINCINNATI” TYPE NFT-320 V

• Manufacturer: Cincinnati
• Model: DE

Manufacturing origin CH Voltage 400 V Netweight 320 kg Dimensions 96x60x199 mm tapping capacity M20 Spindle taper MT3 or SA30 Spindle stroke 125 mm Standard power supply tri/400V Speeds 385 to 3000 ...

Aciera MK I Drilling Machine

• Manufacturer: Aciera

We hereby offer this used Aciera MK drilling machine, located in Switzerland. With a table clamping surface of 590 x 250 mm, it ensures stable operations. The machine features infinitely variable speeds ranging f...

2025 PLATARG 312 HS Ref No: 48610

• Manufacturer: PLATARG

Object: 48610 | Controls: BECKHOFF | Number of slide actions: 13 | Slide force: 3 to | Stroke: 60 mm | Stroke rate (max.): 210 /min | Slide adjustment: 6 mm | Variable speed: yes | Stroke rate (min.): 70 /m...

1978 PLATARG 312 Ref No: 50301

• Manufacturer: PLATARG

Standard flat plate lifters Pneumatic feeder Machine still in production - video available

SCHULER S2-160-1.25-30-160 Ref No: 49505

• Manufacturer: Schuler

Object: 49505 | Drive system: eccentric / crank | Openings in uprights: yes | Number of slide actions: 1 | Total force (nominal): 160 to | Table surface (left-right): 1130 mm | Table surface (front-back): 1000...

1995 KAISER V63/620 Ref No: 54501

• Manufacturer: Kaiser

Operating hours: 74601 (measured on 14-05-25, machine is still in use) Maintenance records available upon request

PLATARG 611 Ref No: 40001

• Manufacturer: PLATARG

Specifications: Number of stations: 12 (11+1) Capacity per ram: 6 tons Maximum stroke: 114 mm Max. shell height: 50 mm Standard ram pitch: 82 mm Blank diameter: 80 mm Maximum speed: 80 spm Example of an overhaule...

1973 BRUDERER BSTA 40 Ref No: 40826

• Manufacturer: Bruderer
• Model: BSTA 40

Object: 40826 | Frame design: H-frame, monoblock | Openings in uprights: yes | Feedstock transport direction: left to right | Total force (nominal): 40 to | Table surface (left-right): 660 mm | Table surface (...

COLCHESTER TRIUMPH VS 2500

• Manufacturer: Colchester
• Model: Triumph VS2500

Turning diameter over bed: 400 mm | Center height: 195 mm | Distance between centres: 650 mm | Turning diameter over cross slide: 246 mm | Hole in spindle: 54 mm | With digital read-out. spindle inner taper: 4 M...

2024 VAPTECH PE400D Ref No: 41094

• Manufacturer: VAPTECH

New press - can be completed within 1 month Object: 41094 | Drive system: eccentric / crank | Total force (nominal): 400 to | Table surface (left-right): 2470 mm | Table surface (front-back): 1250 mm | Stroke:...

SERVO 7150

• Manufacturer: SERVO

SERVO 7150 is a micro-drill for bench with high speed spindle Handy, accurate, spindle nose for B-8 collets. Spindle speed from 200 to 20'000 rpm in 2 stage. Adjustable with the built-in potentiometer. With thyri...

2000 BENELLI 650T/3MR/2/12/3750X1100/LD/ET3 Ref No: 48090

• Manufacturer: Benelli

Press equipped with 2 feeing lines - one from the side for blank cutting in transfer mode and one in line for for progressive die operation.

SENSITIVE DRILLING MACHINE SERVO 7150

TECHNICAL SPECIFICATIONS: Drilling capacity in steel at 60 daN/mm² 3 mm Self-tightening chuck capacity (optional) 0-3 mm Type B8 collet chuck capacity 1-6.4 mm Quill diameter 30.5 mm Drilling depth ...