Used variable speed in osutoria

Jet 354550 J-A5816, 15" Variable Speed Floor Model Drill Press 115/230V 1Ph

• Manufacturer: JET

These JET Drill Presses use a variable-speed motor with the stepped-pulley system, and come equipped with a continuously variable transmission. This enables use at a wide range of speeds, as well as the ability t...

Ducane by Lennox Variable Speed Heat Pump ENERGY STAR 18 SEER 5.0 Ton 17.1 SEER2

• Manufacturer: Lennox

Dynabrade 65753 2" x 48" (51 mm x 122 cm) Electric Variable Speed Tool Post Grinder

• Manufacturer: Dynabrade

Mounts to Standard Lathes, for Applications from Grinding to Superfinishing. Model features air-powered belt tensioning. Each model includes variable speed rate motor. Digital display shows operating speed, with ...

Dynabrade 65752 2" x 48" (51 mm x 122 cm) Electric Variable Speed Tool Post Grinder

• Manufacturer: Dynabrade

Mounts to Standard Lathes, for Applications from Grinding to Superfinishing. Model features air-powered belt tensioning. Each model includes variable speed rate motor. Digital display shows operating speed, with ...

Buehler Fibrpol 69-3500-160 optical fiber polisher with 12" variable speed

• Manufacturer: Buehler

Buehler Fibrpol 69-3500-160 optical fiber polisher with 12" variable speed platen.

JET JMD-45VSPFT Variable Speed Geared Head Square Column Mill/Drill w/ Power Downfeed

• Manufacturer: JET

Engineered to maximize production, the heavy-duty JMD-45VSPFT variable speed Square Column Geared Head Mill Drill with power downfeed and tapping capability delivers the rigidity needed to perform a variety of pr...

RIKON 30-217 17 " Variable Speed 1.5 HP Drill Press w/6" Quill travel & Digital RPM readout 200-2200 RPM

• Manufacturer: Rikon
• Drilling diameter: 25.4 millimeter

Motor horsepower: 1-1/2 HP | Motor amps: 13.3/6.7 | Motor volts: 115/230V, 60Hz | Motor rpm: 1720 | Swing: 17 inch | Chuck size: 5/8 inch | Chuck taper: JT3 | Drilling capacity: 1 inch | Spindle travel: 6 inch |...

Buehler Ecomet 3000 8" variable speed polisher 49-3000-160P to mount on a

• Manufacturer: Buehler
• Model: Ecomet

Buehler Ecomet 3000 8" variable speed polisher 49-3000-160P to mount on a table top, 16 x 20-3/4" rough opening. 115 volts.

Gordon PC250 115/230V 1Ph Variable Speed Reel Control W/Auto Or Manual Mode

• Manufacturer: Gordon

Gordon PC250 115/230V 1Ph Variable Speed Reel Control W/Auto Or Manual ModeMake: Gordon Products Inc Condition: Used, Overall In Good ShapeInput Volts: 115/230 Volt 1Ph Speed Range: 30:1 Manual Or Automatic Opera...

Acer Electronic Variable Speed Lathe - Model 1440EL–14″ Swing–40″ Between Centers–3 hp, 440V Motor

• Manufacturer: Acer

Swing Distance 14″ Minimum Spindle Speed 36 RPMDistance Between Centers 40″ Cross Slide Travel ‎8-5/8″Horsepower 3 hp Swing Over Gap ‎20-3/4″Voltage 440 V Tailstock Taper 3MTPhase 3 Phase Model No 1440EL4Spindle ...

1/4 Hp Right Angle Mixer 10:1 ratio Variable Speed #B-4463

• Manufacturer: Brother of Japan

1/4 Hp Right Angle Mixer 10:1 ratio Variable Speed Mfg. by Brother of Japan for Hyclone. Originally with 50 liter single use reactor, no. CC0605-3, p/n SV50171-01, 9/06 Only parts of the reactor are still with it...

Acer Electronic Variable Speed Lathe - Model 1440EL–14″ Swing–40″ Between Centers–3 hp, 220V Motor

• Manufacturer: Acer

Swing Distance 14″ Minimum Spindle Speed 36 RPMDistance Between Centers 40″ Cross Slide Travel ‎8-5/8″Horsepower 3 hp Swing Over Gap ‎20-3/4″Voltage 220 V Tailstock Taper 3MTPhase 3 Phase Model No 1440ELSpindle T...