• 1998 HAAS VF-2 VMC HB-20547

    $19,500 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Haas

    x axis: 30″ y axis: 16″ z axis: 20″ distance, spindle nose to table: 4″ – 24″ taper size: #40 taper speed: 0 – 7500 rpm capacity: 20 type: ct-40 pull stud: jmtba standard 45 degrees maximum tool di...

  • 1994 FADAL VMC20 VMC CK-20546

    $9,500 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Fadal

    cutting feed rate (x/y/z): .01”-250” (375” at 150%) rapid feed rate (x/y/z): 400 ipm axis drive motor (x/y/z): dc, 1,800 lb thrust ballscrew size (x/y/z): 1.25” diameter x axis: 20” y-axis: 16” z-a...

  • 2004 FADAL 4020HT VMC CK-20545

    $24,500 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Fadal

    cutting feed rate (x/y/z): .01″ – 400 ipm (600″ at 150%) rapid feed rate (x/y/z): 900 ipm (x, y) 700 (z) axis drive motor (x/y/z): ac 3,800 lbs (peak) thrust longitudinal (x-axis): 40″ cross (y-axi...

  • 2013 HYUNDAI WIA F500VM VMC TK-20512

    $55,000 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Hyundai

    speed: 10,000 rpm taper: bt-40 diameter: 2.8” motor power: 20/15 hp motor torque: 95.5 nm drive type: belt x-axis: 43” y-axis: 21.65” z-axis: 20.47 table surface to spindle: 5.9” – 26.4” column to ...

  • 1998 HAAS VF-4 VMC TK-20549

    $26,500 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Haas

    length: 52″ width: 18″ maximum weight on table: 3,500 lbs t-slots width: .625″ center distance: 3.15″ taper size: #40 taper speed: 0 – 7,500 rpm transmission: 2-speed, geared head maximum torque (f...

  • 2013 MAZAK 400A-5X 5-AXIS VMC TK-20551

    $89,500 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Mazak

    spindle type: big plus #40 spindle speed: 40 to 12,000 rpm spindle speed shifts: electric two types spindle bearing id: 2.76” motor (5 min rating): 25 hp motor (10 min rating): 20 hp motor (continu...

  • 2006 HAAS VF-2D 5-AXIS VMC HB-20503

    $64,500 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Haas

    x axis: 30″ y axis: 16″ z axis: 20″ distance, spindle nose to table: 4″ – 24″ taper size: #40 taper speed: 0 – 10,000 rpm maximum power rating: 20 hp maximum torque: 75 ft-lb bearings: abec class 7...

  • Hurco CNC VMC

    No price - Cleveland, OH, USA Recently Added
    • Manufacturer: Hurco

    with 24 tool changer z digital readout overall table size 23.7" x 55.2" working surface 19.7" x 47.2" slotted table table load capacity 1100 lbs. travels: x-axis travel 40 " y-axis travel 20 " z-ax...

  • 2001 HARDINGE VMC800II VMC TK-19514

    $29,500 - Bethlehem, PA, USA
    • Manufacturer: Hardinge

    width: 20.00” length: 36.40” load capacity: 1,540 lbs t-slots (# & size): .708” x 3 x 6.3” taper: 40 speed range: 10,000 rpm transmission: belted motor (cont/peak): 10 /15 hp max torque at base spe...

  • 1997 LEADWELL MV-610 VMC HB-20188

    $21,500 - Bethlehem, PA, USA
    • Manufacturer: Leadwell

    x-axis: 24″ y-axis: 16.1″ z-axis: 20″ spindle nose to table: 5.1” – 25.2” spindle center to column: 17.7” spindle center to table center: + 8.1” table center to column: 9.64” – 25.8” spindle taper:...