Building Filters
- Trusted Seller
47" Air Blast Air Knife
used
Used 47" Air Blast Air Knife equipped with 47" stainless steel opening and mounting brackets.
$2,495 USDMillis, MA - Trusted Seller
46" WTI Pivot Edge Guide
used
- Manufacturer: WTI
Used 46" WTI Pivot Edge Guide equipped with 48" wide rolls, WTI EGS-2 control station, electric actuators, two (2) sensors, and diamond plate walk-over.
$1,995 USDMillis, MA - Trusted Seller
Tidland 10'' Shaftless Pneumatically-Actuated Core Chuck
used
- Manufacturer: Tidland
Used Tidland 10" Shaftless Pneumatically-Actuated Core Chuck For 10" I.D. Cores Pneumatically-Actuated Flanged Tested
$425 USDMillis, MA - Trusted Seller
Custom 6" Shaftless Pneumatically-Actuated Core Chuck - Keyed
used
Used Custom 6" Shaftless Pneumatically-Actuated Core Chuck - Keyed. For 6" I.D. Cores Flanged Bore: 2" (keyed) Key Size: 3/4" x 7/8"
$150 USDMillis, MA - Trusted Seller
6" Custom Shaftless Mechanical Core Chuck
used
Used 6" Custom Shaftless Mechanical Core Chuck. O.D.: 5-15/16"
$195 USDMillis, MA - Trusted Seller
45'' Erhardt+Leimer Offset Pivot Edge Guide
used
- Manufacturer: Erhardt+Leimer
Used 45" Erhardt+Leimer Offset Pivot Edge Guide. Two (2) 50" face x 4" diameter aluminum idler rolls 39.5" correction span Two (2) model OL8028 Optoline CCD array cameras Two (2) model FS 8201 Light Transmitters...
- Trusted Seller
12" Fife OPG-KCA Offset Pivot Edge Guide Assembly
used
- Manufacturer: Fife
Used 12" Fife OPG-KCA Offset Pivot Edge Guide Assembly. Roll Face: 16" Roll Diameter: 4.25" Includes Fife P25 Power Unit And SP3259 Air Sensor Mounted On Fabricated Steel Frame
$1,495 USDMillis, MA - Trusted Seller
Nim-Cor 8" Shaftless Pneumatic Chuck
used
- Manufacturer: Nim-Cor
Used Nim-Cor 8" Shaftless Chucks Sold as Set of 2 Size: 10" x 10" x 10"
$185 USDMillis, MA - Trusted Seller
7.5" Nimcor Air Chuck With Core Stop - 2-15/16" Bore
used
- Manufacturer: Nimcor
Used 7.5" Nimcor Air Chuck With Core Stop - 2-15/16" Bore Tested
$175 USDMillis, MA - Trusted Seller
62" Black Clawson Turn Bar Assembly
used
- Manufacturer: Black Clawson
Used 62" Black Clawson Turn Bar Assembly. Two (2) 5" Diameter x 104" Face Turn Bars Two (2) 5" Diameter x 66" Face Lead In/Out Idler Rolls One (1) 4-7/8" Diameter x 64" Face Grooved Rubber Spreader Roll Fabricate...
- Trusted Seller
$175 USDMillis, MA - Trusted Seller
39" Custom Stainless Steel Air Knife Assembly
used
Used 39" Custom Stainless Steel Air Knife Assembly. Knife Opening: 39-3/8", Opening Is Manually Adjustable At Each End Stainless Steel Knife Body Pneumatically Loaded With Air Cylinder And Gauge At Each End Manua...
$4,500 USDMillis, MA - Trusted Seller
12'' Tidland Air Chuck - 4'' Bore
used
- Manufacturer: Tidland
Used 12" Tidland Air Chuck with 4" Bore. For Mounting on a 4" Diameter Shaft Tested.
$325 USDMillis, MA - Trusted Seller
10" x 3" Nim-Cor Core Chuck Shell
used
- Manufacturer: Nim-Cor
Used 10" x 3" Nim-Cor Core Chuck Shell. I.D.: 3" O.D.: 10" With Adjustable Collar New Bladder - Can Be Purchased From Maxcess with Serial Number
$145 USDMillis, MA - Trusted Seller
10" Tidland Shaftless Pneumatically-Actuated Core Chuck
used
- Manufacturer: Tidland
Used 10" Tidland Shaftless Pneumatically-Actuated Core Chuck. For 10" I.D. Cores Pneumatically-Actuated Flanged Tested
$395 USDMillis, MA