• 2001 MASTERWOOD SPEEDY 207 CNC BORING MACHINE (P TO P)

    $10,730 - Charlotte, NC
    • Manufacturer: Masterwood
    • Model: SPEEDY 207
    • Elect./Voltage: 230 V, 60 Cy, 3 Ph

    elect./voltage: 230 v, 60 cy, 3 ph masterwood speedy 207 cnc boring machine (p to p): -- specifications:working capacity "x" axis is mm), "y" axis 34.5" (870 mm), "z" axis stroke 3.3" (85 mm), max....

  • 2009 LEADERMAC LMC-518S MOULDER (FEED THROUGH)

    $19,772 - Charlotte, NC
    • Manufacturer: LMC
    • Elect./Voltage: 460 V, 60 Cy, 3 Ph

    elect./voltage: 460 v, 60 cy, 3 ph leadermac lmc 518 s "smartmac" feed through moulder; 5-head (b-r-l-t-b) with a working cap. of 7" x 5".head sequence: bottom 7.5 hp, right/left 15 hp, top 15 hp a...

  • 1987 STETSON-ROSS 612-C1 4-SIDED PLANER MATCHER W/PROFILES

    $26,627 - Charlotte, NC
    • Manufacturer: Ross
    • Elect./Voltage: 440 V, 60 Cy, 3 Ph

    elect./voltage: 440 v, 60 cy, 3 ph stetson_ross 4 sided planer-matcher model 612-c1 -- 6-heads, 15" x 8" capacity. - head sequence: top (2) 65 hp, bottom 65 hp, 35 hp on side heads, 65 hp top profi...

  • 2004 UNICONFORT BIOTEC-40 BOILER, BIOMASS-FIRED

    $78,490 - Charlotte, NC
    • Manufacturer: UNICONFORT
    • Elect./Voltage: 240 V, 60 Cy, 3 Ph

    elect./voltage: 240 v, 60 cy, 3 ph italian made hot water boiler specifically designed to burn woody & other types of biomass; this particular configuration comes with the following key features: -...

  • NEWMAN SS-24 SHAVING MILL

    $25,087 - Charlotte, NC
    • Manufacturer: NEWMAN
    • Elect./Voltage: 460 V, 60 Cy, 3 Ph

    elect./voltage: 460 v, 60 cy, 3 ph .newmann/whitney "ss-24" shaving mill. -- 24" diameter x 14" wide cutterhead with 16-knife rows, carbide tipped 5" thick x 14" wide workpiece opening -- otor belt...

  • TAYLOR 12 SECTION CLAMP CARRIER (PNEUMATIC)

    $10,432 - Charlotte, NC
    • Manufacturer: Taylor

    elect./voltage taylor 12 section clamp carrier • 8.5' width cap., (6) clamps per section (70 clamps total).• 32" max. clamp opening (70) clamps with 2-1/2" jaw heightcomplete with:torque wrench...

  • LANCASTER 1863 CLAMP (ASSEMBLY, 2-WAY)

    $13,289 - Charlotte, NC
    • Manufacturer: LANCASTER
    • Elect./Voltage: y, 3 Ph

    elect./voltage: y, 3 ph lancaster 1863 2-way assembly clamp. machine design at 30 degree angle w/ screw set up for main jaw, auxiliary jaws and keyway shaft. -- the (2) sets of auxiliary jaws move ...

  • Various woodworking machinery, woodworking machinery Other

    $10,346 - Hammaslahti, Finland Recently Added

      - press for cabinet assembly - press frames and boxes. -press ott for fanerirovaniya, 3000h1300, electric heating sheets. - holz-her machine for moldings, baseboards, corner rounding, grinding / po...

    • 1995 ULTIMIZER 14B OPTIMIZING ROLL FEED CUTOFF SAW

      $8,894 - Charlotte, NC
      • Manufacturer: ULTIMIZER
      • Elect./Voltage: 460 V, 60 Cy, 3 Ph

      elect./voltage: 460 v, 60 cy, 3 ph ultimizer - 14b, [...] roll feed cutoff saw. -- automatic chop saw system, left-hand machine (boards feed from right-to-left), 3/4" x 8" crosscut cap., 18" saw bl...

    • 1998 BARBERAN 4' FINISH LINE FLAT PANEL FINISHING

      $78,986 - Charlotte, NC
      • Manufacturer: Barberan
      • Elect./Voltage: 480 V, 60 Cy, 3 Ph

      elect./voltage: 480 v, 60 cy, 3 ph barberan - flat line roll coat finishing system composed of: -- rotating brush panel cleaner model lpv-1400 ab/rb: feed system is a variable speed vacuum holddown...