Used Forging

National 4″ UPSETTER

• Manufacturer: National

Equipped With Features: Air Clutch and Brake Maximum bar diameter: 2.5 inches | Upsetting power: 500 tons | Stroke per minute: 55 | Stroke: 9.5 inches | Grip opening: 4 inches | Grip tons: 250 tons | Gather: 6.8 ...

AJAX 3″ UPSETTER

• Manufacturer: Ajax

Equipped With Maximum bar diameter: 3 inches | Upsetting power: 600 tons | Stroke per minute: 45 | Stroke: 11.250 inches | Gather: 7.5 inches | Hold: 3.5 inches | Die opening: 5 inches | Die space height: 20 inch...

1981 National Extra Long Stroke 4Die Progressive Cold Header

• Manufacturer: National

Equipped With * Large Free Standing Two Plane Straightener * Ajax Hogue #4 Wire Drawer * PKO ** Machine is a four die progressive header but only using the machine as three die. There is no kickout in fourth die ...

ACMA 1D1B Hot forming machine

• Manufacturer: Acma

Equipped With * 1Die 1Blow forming stations * 15kW Induction heating unit & self container chiller * Machine suited for production of ejector pins or exotic fasteners & material parts ? Titanium, Inconel, Waspall...

1995 TOWA 4A

• Manufacturer: Towa

Equipped With * Pneumatic load/unload Minimum length: .590" | Maximum length: 4" (6" with pneumatic loader) | Minimum shank diameter: .118" | Maximum shank diameter: .748" | Chucking clearance: .709" | Chuck open...

Industrial Soap Dish Mold Set

Collection of metal soap dish molds. Industrial grade casting equipment used for metal pouring and shaping operations. LEFT WALL

FOURWAY DRYER B-50

ONE USED PARTS DRYER MFG. 'FOURWAY AUTOMATIC PARTS & TOOLING" SERIAL # 369 ROTATING AIR/HEAT DRYER FOR SMALL PARTS ENTRY AND EXIT SCHUTE AGE OF MANUF. 1993

K.H. HUPPERT 2,000°F ELECTRIC FURNANCE

USED "K.H. HUPPERT CO." ELECTRIC FURNACE STYLE 2304 PC OT TYPE ST SERIAL # 439 VOLTS 208 AMPS 17 OVEN DIMS. 10" W x 11" H x 19" DEEP TEMPERATURE RANGE 300°F TO 2,000°F POWER 6 Kw WEIGHT 350 LBS. (APPROX.) EQUIP...

Reduce Forging Roll National 2

• Manufacturer: National

Max. dia : 38 mm, Max Length : 400 mm, Roll Dia : 200 mm, Roll Width : 150 mm, Roll Adjustment : 2 mm Machine Length : 1600 mm, Machine Width : 1825 mm, Main Motor : 6 kW Machine Net Weight : 3 tons,

Drop-Hammer-100-LBS

"Normal wear from use, needs a good cleaning. some rust. broken valve handle." Weight...2380lbs. Height...93″Floor footprint...28″ L-R, 22″ F-B. Currently bolted onto a steel plate that is 22″x22″x1″ thick. The a...

Reduce Forging Roll National 4

• Manufacturer: National

Diameter : 57 mm, Length : 508 mm, Roll dia : 254 mm, Roll Width : 210 mm, Revolutions per minute : 75 rp, Machine Length : 2007 mm, Machine Width : 1702 mm, Machine Net Weight : 5.5 tons, Main Motor : 11...

Reduce Forging Roll Ajax 6

• Manufacturer: Ajax

Working Pressure : 100 tons, Width of Roll dies : 1500 mm, Maximum roll die dia. : 1100 mm, Maximum Length rolled section : 2050 mm, Weight, approx. : 160 tons, Maximum Billet Dia : 300 RCS mm, Equipped Wit...

4000 tons Hot Forging Line National Maxipress

• Manufacturer: National
• Model: MAXIPRESS

1) Hot Forging Press Make : National,USA Model : Maxipress Yom : 1961 Capacity : 4000 tons, Stroke: 375 mm, Stroke per minutes : 46, Shut height: 991 mm, Die seat (F to B x L to R) : 1600 x 1550 mm, Ram ...

2000 tons Hot Forging Line Sumitomo TFPX-2000

• Manufacturer: Sumitomo
• Model: TFPX-2000

Capacity : 2000 tons, Stroke : 350 mm, Strokes per min : 75, Shut height : 850 mm, Slide Adjustment : 7 mm, Ram size (LR x FB) : 1200 x 1300 mm, Bed size (LR x FB) : 1320 x 1300 mm, Bed LR : 2300 mm, Bed ...

10 tons Hammer Forging Hydraulic Line KGK1600

• Manufacturer: Lasco

1) Hydraulic Forging Hammer Make : Lasco, Model : KGK1600, Blow capacity : 16,000 kgm, Capacity of continuous blow/minute : 60 to 70, Blow high with standard die : 1100 mm, Hammer total weight : 287 tons, ...