- Trusted Seller
TINIUS OLSEN S-1000-2A EXTENSOMETER TENSILE TESTER
- Manufacturer: Tinius-Olsen
“OLD STOCK” TINIUS OLSEN S-1000-2A EXTEMSOMETER TENSILE TESTER PAT. 2767376 A 250 B 500 C 1000 S. O. 154378 INSTRON CINCH 0530 DB25P MOD#: S-1000-2A GAGE LENGTH: 2" TRAVEL: +2%/-2% ID CODE: 0/24 SERIAL: SO154378 ...
$1,400 USDCoffeyville, KS 
Atlas Film Maker Kit with 15 ton Press
- Manufacturer: Atlas
Specac film maker kit with 15 ton press is designed for making polymer films for evaluation in transmission with an FTIR. As pictured, this is a complete system that includes the dies (for various thicknesses), ...
$3,800 USDWhite Bear Lake, MN- Trusted Seller
BinMaster PRO-IIX Capacitance Level Control
- Manufacturer: BinMaster
This listing is for a NEW BinMaster PRO-IIX capacitance level control. A capacitance probe is a point level indicator, commonly used for high or low level detection in a bin, tank or silo. BinMaster capacitance p...
Fargo, ND SPI Rockwell Model 15-817-0 Hardness Tester s/n 15436, Tooling & Manual
- Manufacturer: Rockwell
SPI Rockwell Model 15-817-0 Hardness Tester s/n 15436, Tooling & Manual To Purchase Equipment or Make An Inspection, Contact: The Auctioneer’s Office At 617-964-1886 or
Newton, MA- Auction
Newage Portable Hardness Tester with Standards in Wood Case
- Manufacturer: NewAge
Lot 400 Newage Portable Hardness Tester with Standards in Wood Case
Plymouth, MNVisit Auction Website - Trusted Seller
Boerner Type Sample Divider (16-3/4"H x 6-3/4"W)
- Manufacturer: Unknown
The divider is gravity operated. Sample is placed in the hopper and released by moving a slide gate located in the hopper throat. The product is evenly dispersed over a cone that has 22 pockets. The grain, after ...
Fargo, ND 
Struers DP-U3 300mm/12" variable speed polisher 0 to 1100 rpm with PdM-Force
- Manufacturer: Struers
Struers DP-U3 300mm/12" variable speed polisher 0 to 1100 rpm with PdM-Force automatic specimen mover with weights and 1.5" capacity (FORMA). 115 volts 144# net weight
$3,450 USDSalem, MA
Buehler Ecomet II with Whirlimet, 60-1528, holds 3 specimens, choice of 1,
- Manufacturer: Buehler
- Model: Ecomet
Buehler Ecomet II with Whirlimet, 60-1528, holds 3 specimens, choice of 1, or 1.25 inch.
$3,150 USDSalem, MA
Buehler Ecomet6, 2 platen 8" variable speed polisher. 115 volts
- Manufacturer: Buehler
- Model: Ecomet 6
Buehler Ecomet6, 2 platen 8" variable speed polisher. 115 volts
$3,950 USDSalem, MA
Buehler Ecomet 300 with Automet250 head. 12" platen. Head has both central and
- Manufacturer: Buehler
- Model: Ecomet
Buehler Ecomet 300 with Automet250 head. 12" platen. Head has both central and single force. Comes with one 3 position 2" central force specimen holder. 230 volts, single phase input. Newly Arrived
reconditioned Buehler IsoMet 4000 automatic precision saw 11-2680, 7" blade
- Manufacturer: Buehler
- Model: Isomet-4000
reconditioned Buehler IsoMet 4000 automatic precision saw 11-2680, 7" blade capacity. 200-5000 rpm, 1.25 HP motor. Without blade truing assembly (disregard it shown in the photos) 83-264 VAC 50/60 Hz
Buehler Ecomet IV 12", 50 to 500 rpm polisher. 115V 110#
- Manufacturer: Buehler
- Model: Ecomet
Buehler Ecomet IV 12", 50 to 500 rpm polisher. 115V 110#
$3,500 USDSalem, MA
Buehler 11-2181 rotating chuck accessory for use in the Isomet 1000 saw
- Manufacturer: Buehler
- Model: Isomet-1000
Buehler 11-2181 rotating chuck accessory for use in the Isomet 1000 saw New Surplus
$1,425 USDSalem, MA
Buehler Simplimet II specimen mounting press 20-1320-115, with a choice of 1",
- Manufacturer: Buehler
- Model: Simplimet
Buehler Simplimet II specimen mounting press 20-1320-115, with a choice of 1", 1.25" or 1.5" mold, 115 volt heater 85#
$2,750 USDSalem, MA- Trusted Seller
Tensile Compression Tester Detroit NST-1 948 20K 100 kN Spot Weld Pull Tester Test, Measurement & Inspection
- Manufacturer: Detroit
“Excellent condition.” 20K 100 kN Detroit NST-1 948 Tensile Compression Tester Spot Weld Pull Tester with Delta Power B3874 motor Frame 2LA-565628 3/4 HP 115/230 Volts 10.0/5.0 Amps 60 Hz 1 Ph 1725 RPM New hydrau...
Struers Discotom-10 Materials Testing
- Manufacturer: Struers
- Model: Discotom-10
Good condition Struers Discotom-10 Materials Testings manufactured in 2015. Located in Belgium and other countries. Click request price for more information.
Belgium
Tip: Enter manufacturer, model or keyword
