Used Mineral Processing in Canada

Conc jet pump system incl.: (5) 6 mm rubber lined hoppers

• Manufacturer: JET

Conc jet pump system incl.: (5) 6 mm rubber lined hoppers, (1) Eriez vibratory feeder, valves c/w (2) Warman centrifugal pumps, mod. 75WBH, 100 hp ea. (2nd Loc. Red Zone, Level M)

UV-IR infra-red/UV dryer

UV-IR infra-red/UV dryer, ser. no. 11070 (2015) w/ Eriez feeder, infeed and outfeed chutes c/w Kason vibratory separator, ser. no. M-1047, 1/3 hp

Warman sump-pump

• Manufacturer: Warman

Warman sump-pump, mod. V15F03, 20 hp c/w valves

Holman-Wilfley 8000SD Concentrating Table

• Manufacturer: Holman-Wilfley Ltd

Capacity: Up to 2,500 kgs/Hour (Particle Size Dependent) | Deck type: Single Deck | Deck area: 7.5m² | Deck size: 1,600mm x 4,900mm | Water supply requirements: 20 - 35L/min | Drive: Baldor Electric Motor | Powe...

Denver D-1 Lab Flotation Cell

• Manufacturer: Denver

Tachometer Not Installed Stainless Steel Wetted Parts (Urethane impeller and diffuser). Comes with 750mL Stainless Steel Tank

Denver No. 18 Special Flotation Cells

• Manufacturer: Denver

Manual Cell to Cell Flow Control Gate Naturally Aspirated Sealed Standpipe

Mill, Sag, 40' X 25', FL Smidth, 34,866 HP, Unused #D739644

• Manufacturer: FL Smidth

Unused FL Smidth SAG mill, 40' diameter x 25' length, designed for 34,866 HP (26,000 kW) wrap-around GMD motor (motor not included). No liners included.

Mill, SAG, 32' x 12', Hardinge-Koppers, 6800 HP Dual Drive #D744636

• Manufacturer: Hardinge

32' x 12' SAG mill, manufactured by Hardinge-Koppers, driven by dual GE 3400 HP 4000 V, 60 Hz AC wound rotor induction motors, model 108770. Complete with trunnions, trunnion liners, girth gear, pinion assemblies...

Mill, Sag, 13'6" X 4', Marcy, No Motor, #D739647

• Manufacturer: Marcy

Marcy Dry Grind SAG Mill, 13' 6" Diameter x 4' Long. Includes bull gear, pinion gear, large Falk gearbox, air clutch, and lube set. No motor. Manufactured new in 1988.

Mill, Sag, 38' X 25'5", Metso, 26,016 HP, Unused #D739643

• Manufacturer: Metso

Unused Metso sag mill, 38' (11.58 m) diameter x 25' 5" (7.76 m) long, 26,016 HP (19,400 kw) Siemens wrap around drive motor-operating frequency 50/60 Hz. EGL: 22' (6.7 m), mill speed: 7.5-10.08 RPM. Maximum volum...

Oro Industries 16in Dia. Reverse Spiral Concentrator

• Manufacturer: Oro Industries

GPM @ 20–40 PSI Water Hose Hook-Up External 1in Hose Barb Powder Coat Finish This is a Continuous or Batch Feed Secondary Concentrator for Processing Primary Sluice Concentrate, Primary Jig Concentrate, Centrifug...

Denver No. 15 3-Cell Flotation Cells

• Manufacturer: Denver

Launder Trough Paddle Shaft Overall Dimensions: Bank: (3) Cells | Cell dimensions: 24in Long x 24in Wide x 36.5in Deep | Cell volume: 12ft³ | Drive: Electric Motor | Power output: 5HP | Rotation speed: 1740RPM | ...

New Surplus FLSmidth Knelson QS48 Gravity Concentrator

• Manufacturer: FLSmidth

Piping and Instrumentation Assemblies Including: Bowl Motion Proximity Sensor and Speed Transmitter Fluidization Water Flow Monitoring with a Magnetic Flowmeter c/w Transmitter V-Notch Ball Valve c/w Quarter-Turn...

New Surplus Knelson XD70 Centrifugal Concentrator

• Manufacturer: FLSmidth Knelson Concentrators

Piping and Instrumentation Assemblies Including: Bowl Motion Proximity Sensor and Speed Transmitter Fluidization Water Flow Monitoring with a Magnetic Flowmeter c/w Transmitter Water Control Valve c/w Actuator an...

New Surplus Citic 30ft Dia. x 16ft Long SAG Mill

• Manufacturer: Citic Heavy Industries

General Model Specifications: Size: 30ft Dia. x 16.6ft Long | Mill diameter: 9.15m Dia. (30ft) | Mill length: 5m Long (16.6ft) | Drive: Electric Motor | Power output: 7,500kW | Frequency: 50Hz | Rotation speed: 1...