Used Processing in Kansas, USA

ZANDER PARKER ADSORPTION DRYER K-MT3 OPERATING PRESSURE 101,5PSIG

• Manufacturer: Parker
• Model: K-MT3

ZANDER PARKER ADSORPTION DRYER K-MT3 OPERATING PRESSURE 101,5PSIG DESIGN PRESSURE 232 PSIG MANUFACTOR NO. 08/51988 YEAR OF MANUFACTOR 2008 MEDIUM DRUCKTUFT/AIR MIN OPERATING TEMP +33,8ºF MAX OPERATING TEMP +122ºF...

THERMAL TRANSFER HEAT EXCHANGER A0F-40-FB BALDOR 3 PHASE MOTOR M3556

• Manufacturer: Baldor - Reliance

“MAY HAVE SHELF WEAR.” THERMAL TRANSFER HEAT EXCHANGER MODEL: A0F-40-FB 300PSI 300°F SERIAL: C-64465 BALDOR MOTOR: CAT. NO. M3556 SPEC: 35H876-1272 FRAME: 56/56H SER. F695 HP: 1 HZ: 60 VOLTS: 208-230/460 AMPS: 3....

ID TECHNOLOGY LABEL APPLICATOR ST1000 .5" X .5" TO 4.5" X 4.5" LABEL CAPACITY

“COMES ON, BUT MISSING SOME SMALL PARTS FOR THE REEL, NOT TESTED FOR FULL FUNCTIONALITY.” ID TECHNOLOGY - LABEL APPLICATOR MODEL ST1000 .5" X .5" TO 4.5" X 4.5" LABEL CAPACITY **NOTE: COMES ON, BUT MISSING SOME S...

STRATUS SPECIAL PURPOSE AIR CONDITIONER TA10-040-26-04 32"x12"

• Manufacturer: STRATUS

“MAY HAVE SHELF WARE” STRATUS SPECIAL PURPOSE AIR CONDITIONER TA10-040-26-04 SERIAL NO. 1441030041 L 32" W 12" 208/230 VOLTS 3.07 AMPS BTU/H 4000 PHASE 1 HZ 60 REFRIGERANT R422D 9.75 OUNCES LOW SIDE 188 PSI HIGH ...

ID TECHNOLOGY LABEL APPLICATOR ST1000 .5" X .5" TO 4.5" X 4.5" LABEL CAPACITY

“COMES ON, BUT MISSING SOME SMALL PARTS FOR THE REEL, NOT TESTED FOR FULL FUNCTIONALITY.” ID TECHNOLOGY - LABEL APPLICATOR MODEL ST1000 .5" X .5" TO 4.5" X 4.5" LABEL CAPACITY **NOTE: COMES ON, BUT MISSING SOME S...

PINNACLE FLOOR SCALE PS3000 5,000LBS WEIGHT CAPACITY 48" WEIGHT SURFACE DEPTH

• Manufacturer: PINNACLE SCALE

PINNACLE SCALE FLOOR SCALE PS3000 5,000LBS WEIGHT CAPACITY 48" WEIGHT SURFACE DEPTH 48"x48"X3-3/4" MJ/#3820/WB SURPLUS/(1)SO

J &R COMMERCIAL RADIATOR INC. HEAT EXCHANGER 4212 LENGTH 31" WIDTH 11"

• Manufacturer: J&R COMMERCIAL RADIATOR

J &R COMMERCIAL RADIATOR INC. HEAT EXCHANGER 4212 LENGTH 31" WIDTH 11" HEIGHT 11" APPROX. WEIGHT: 116 LBS MJ/#3992/WB SURPLUS/(1)SO

CORONET T SLOT TILT TABLE CAST IRON BASE STEEL TOP 15-1/8"x10"

• Manufacturer: CORONET

“MAY HAVE SHELF WARE” CORONET T SLOT TILT TABLE CAST IRON BASE STEEL TOP L 15-1/8" W 10" APPROXIMATLEY 118LBS DT-3871-(R12-2)-1-BH

BEKO ACC 65 HEATLESS DESICCANT DRYER

• Manufacturer: Meko

“OLD STOCK” BEKO ACC 65 HEATLESS DESICCANT DRYER BRAND: BEKO MODEL: ACC 65 SERIAL NO.: 23 829 CODE NO.: 4887 RATED FLOW: 65 SCFM@ 100PSIG/7.0BARG MIN. PRESSURE: 58PSIG/4.0BARG MAX. PRESSURE: 232PSIG/16.0BARG MIN....

PARKER PNEUMATIC FILTER ASSEMBLY

• Manufacturer: Parker

“OLD STOCK NO BOX” PARKER PNEUMATIC FILTER ASSEMBLY 07E31A13AC COMBO FILTER/REGULATOR STANDARD 1/2" NPT 90 SCFM 150 MAX PSI POLYCARBONATE BOWL MANUAL DRAIN 40 MICRON RATING GAUGE PORT 1/4" BODY: ZINC MODULAR CONN...

OHAUS CD11 CHAMP II BENCH SCALE CAPACITY 5 TO 20,000

• Manufacturer: Champ

OHAUS CD11 CHAMP II BENCH SCALE CAPACITY: 5 TO 20,000 GRADUATION: 0.001 TO 5 RESOLUTION: NTEP 1:5000LFT MAXIMUM DISPLAYED RESOLUTION 1:20,000 NON LFT WEIGHING MODES: LB, Kg, g FUNCTIONS/; WEIGHING, PARTS COUNTING...

BINGHAM QUALITY FORM ROLLER OAL: 24-3/8" LENGTH OF ROLLER: 20-1/8"

• Manufacturer: BINGHAM

“MAY HAVE SHELFWEAR” BINGHAM QUALITY FORM ROLLER OD OF BEARING: 1/2" OD OF ROLLER END: 2" OAL: 24-3/8" LENGTH OF ROLLER: 20-1/8" *** WORN ON ONE END *** APPROXIMATE WEIGHT: 7 LBS BOX: 26 X 4 X 4 CA-1717-SKID #295...

A-KORN WATER FORM ROLLER KYD627 OAL: 22-1/2"

• Manufacturer: A-KORN

“MAY HAVE SHELFWEAR” A-KORN WATER FORM ROLLER KYD627 OD OF BEARING: 1/2" OD OF ROLLER END: 2" OAL: 22-1/2" LENGTH OF ROLLER: 19-1/4" APPROXIMATE WEIGHT: 7 LBS BOX: 24 X 4 X 4 CA-1580-SKID #365-(1)-DP

BINGHAM QUALITY FORM ROLLER OAL: 21-1/2" LENGTH OF ROLLER: 17-1/4"

• Manufacturer: BINGHAM

“MAY HAVE SHELFWEAR” BINGHAM QUALITY FORM ROLLER OD OF BEARING: 1/2" OD OF ROLLER END: 3-1/2" OAL: 21-1/2" LENGTH OF ROLLER: 17-1/4" APPROXIMATE WEIGHT: 7 LBS BOX: 24 X 4 X 4 CA-1711-SKID #295-(1)-DP

UNBRANDED QUALITY FORM ROLLER OAL: 24-5/8" LENGTH OF ROLLER: 20"

“MAY HAVE SHELFWEAR” UNBRANDED QUALITY FORM ROLLER OD OF BEARING: 1/2" OD OF ROLLER END: 2-3/8" OAL: 24-5/8" LENGTH OF ROLLER: 20" APPROXIMATE WEIGHT: 7 LBS BOX: 26 X 4 X 4 CA-1742-SKID #295-(1)-DP