Processing » Extruders » Japan

Building Filters

14

Used Extruders in Japan

2011 Type B 40mm Extruder
- Manufacturer: 石中鉄工所
Product name: Type B 40mm Extruder | Power: 22kw+24kw | Material: Screw: SCM-440 HCr Plated, Cylinder: SACM-645 Chicka Treated | Supplier area: 60Hz
Tamba-Sasayama, Japan
1969 TABATA ---
- Manufacturer: TABATA
Screw Dia.120mm, L/D=22.8, For PVC/PE; Core dia.Max.40mm, Dies Dia.Max.52mm, Supply Bobbin Dia. Max.1500, Take-up Bobbin Dia. Max.1800
Tokyo, Japan
2019 JIANGSU SUYANG ---
- Manufacturer: JIANGSU SUYANG
Not used, 11 inches block
Tokyo, Japan
1986 OMIYA ---
- Manufacturer: OMIYA
Screw Dia.70mm, L/D=24, For PVC/PE/PU; Core dia.Max.30mm, Dies Dia.Max.30mm, Supply Bobbin Dia. Max.1500, Take-up Bobbin Dia. Max.1500
Tokyo, Japan
2007 TABATA ---
- Manufacturer: TABATA
Screw Dia. 35mm, L/D=24; Screw, Hopper & Breaker Plate equipped, Control Panel & Cross-head not available, Specification Sheet & Manual available in Japanese, Used for TPE,PP,PE and Half-hard PVC resin
Tokyo, Japan
1979 GM ENGINEERING+MAILLEFER+MITSUBA 1979、1983、1989
- Manufacturer: Maillefer
Screw Dia 115mm, Sub-screw 45mm; PVC Insulation, 90KW DC motor, 2.6 to 38sqm, 800mm Accumlator, 1500mm Dual Take-up
Tokyo, Japan
1989 OMIYA C2-0091
- Manufacturer: OMIYA
Screw Dia.65mm, L/D=24, For PVC/PE/PU; Finished dia.Max.3mm, Supply Bobbin Dia. Max.800, Take-up Bobbin Dia. Max.800
Tokyo, Japan
FOLKE & SANDELIN Type 4
- Manufacturer: FOLKE & SANDELIN
9 inches block for 10 to 85mm OD, AC90KW motor 2015; 10T Furnace x 2 units, solid state controller & proportional valves and HMI replaced. Reducer is rebuilt.
Tokyo, Japan
FOLKE & SANDELIN Type 3
- Manufacturer: FOLKE & SANDELIN
9 inches block for 6 to 85mm OD; Machine, new electronic and new T control in 2027 *Furnace and material conveyor not included
Tokyo, Japan
2018 Koyo Machine Works Ltd. ZZ
- Manufacturer: Koyo
Product name: K-3 extrusion | Warranty period: 1 month | Storage location: Kasai Warehouse
Toyonaka, Japan
1998 KCK KCK80×2-50VEX
- Manufacturer: KCK
Product name: Extruder | Power: 5.5kW 4P 200V | Material: SKD11 | Supplier area: 60Hz | Control panel: control panel | Accessory: feder | Develop note: Before overhaul
Tamba-Sasayama, Japan
（Ikegai Corp. 65mm twin-screw extruder: GTR65II
（Ikegai Corp. 65mm twin-screw extruder: GTR65II Inquiry No.] 23b180045 Inquiry No.] 23b180045 Twin Screw Extruder Applicable resin: R, PVC (powder or pellet) Extrusion capacity: 70-120kg/hr (depending on conditio...
Ibaraki, Japan
[Filling machine (extruder)]
Remarks: Terrine type stock. There is a stock of the same type machine (product number 6069).
Toda, Japan
[Filling machine (extruder)]
Remarks: Terrine type in stock Same type machine (product number 6068) in stock
Toda, Japan