Machine Tools » Centre Lathes » Sweden

Search By Manufacturer

Building Filters

26

Used Centre Lathes in Sweden

  • Trusted Seller
    Colchester Triumph 2000

    Colchester Triumph 2000

    • Manufacturer: Colchester
    • Model: Triumph 2000
    • Spindle bore: 38.1 mm

    2-axis digital readout 3-jaw chuck 4-jaw plate face plate tool post 5 pcs tool holders Toolfix live center drill chuck etc This information is prepared to the best of our ability - but is not binding in detail. A...

    Gnosjö, Sweden
  • Trusted Seller
    Schaublin 102

    Schaublin 102

    • Manufacturer: Schaublin
    • Model: 102
    • Spindle bore: 18 mm

    27 pcs collets drawbar 3-jaw chuck live center drill chuck etc. We are selling machine in existing condition. This information is prepared to the best of our ability - but is not binding in detail. All prices are...

    Gnosjö, Sweden
  • Trusted Seller
    Schaublin 102N-VM

    Schaublin 102N-VM

    • Manufacturer: Schaublin
    • Model: 102N-VM
    • Spindle bore: 18 mm

    We have installed machine at a new workbench with OAK table and machine comes with following accessories =turret stop independent 4-jaw chuck Ø152 mm 3-jaw chuck Ø127 mm gear set (24 pcs) ~90 pcs collets 1-25 mm ...

    Gnosjö, Sweden
  • Trusted Seller
    Schaublin 102N

    Schaublin 102N

    • Manufacturer: Schaublin
    • Model: 102N
    • Spindle bore: 20 mm

    Tailstock with W20 taper (quill stroke: 150 mm) and turret stop oblique turret W20 taper with 4 tool stations collet chuck with 17 pcs collets W20 1-2-3-4-5-6-7-8-9-10-11-12-13-14-15-16-20 mm extra slide (cut-off...

    Gnosjö, Sweden
  • Trusted Seller
    Schaublin 102N-80

    Schaublin 102N-80

    • Manufacturer: Schaublin
    • Model: 102N80
    • Spindle bore: 32 mm

    The turret long-& cross slide 27 pcs collets 4-22 mm cut-off slide 3-jaw chuck Ø130 mm tool post & 5 pcs tool holders clamping chuck (eccentric adjustable in 2 ways) clamping chuck (hole Ø45 mm) live center 2 pcs...

    Gnosjö, Sweden
  • Trusted Seller
    1966 Schaublin 102-80

    1966 Schaublin 102-80

    • Manufacturer: Schaublin
    • Model: 102N80
    • Spindle bore: 32 mm

    Cut-off level slide collet chuck coolant kit and some tools in turret. This information is prepared to the best of our ability - but is not binding in detail. All prices are exclusive of VAT and are subject to pr...

    Gnosjö, Sweden
  • Trusted Seller
    1968 Schaublin 102-80

    1968 Schaublin 102-80

    • Manufacturer: Schaublin
    • Model: 102N80
    • Spindle bore: 32 mm

    Cut-off level slide collet chuck + collets coolant kit and some tools in turret. This information is prepared to the best of our ability - but is not binding in detail. All prices are exclusive of VAT and are sub...

    Gnosjö, Sweden
  • Trusted Seller
    Schaublin 102N-P-TR

    Schaublin 102N-P-TR

    • Manufacturer: Schaublin
    • Model: 102N
    • Spindle bore: 20 mm

    This information has been prepared to the best of its ability - but is not binding in detail. All prices are exclusive of VAT with reservation for price / currency changes.

    Gnosjö, Sweden
  • Trusted Seller
    Schaublin 102N

    Schaublin 102N

    • Manufacturer: Schaublin
    • Model: 102N
    • Spindle bore: 20 mm

    Turret with 6 pcs station level slide (cross slide) collet chuck with collets drill chuck some tool holders for turret and cross slide etc. This information is prepared to the best of our ability - but is not bin...

    Gnosjö, Sweden
  • Schaublin 102N 105-80

    Schaublin 102N 105-80

    • Manufacturer: Schaublin
    • Model: 102N 105-80
    • Spindle bore: 18 mm

    Quick-closing colletchuck, collets F27, 3-jaw chcuk, 4-jaw chuck, turret head, reverse knee operated & coolant unit.

    Värnamo, Sweden
  • Tos SUI 80x4000 RP

    Tos SUI 80x4000 RP

    • Manufacturer: TOS
    • Model: SUI
    • Spindle bore: 52 mm

    Turning diameter over bed: 800mm | Lathe diameter over cross slide: 520mm | Spindle drilling: 71mm | Spindle speed: 4.5-1800rpm | Spindle nose: CSN 201011 B8 | Weight between studs: 1600kg | The wife in the stud...

    Värnamo, Sweden
  • Tos SUI 80x4000 RP 010801

    Tos SUI 80x4000 RP 010801

    • Manufacturer: TOS
    • Model: SUI
    • Spindle bore: 52 mm

    Fixed & following steadyrest 2-axl. DRO. Stepless spindlespeed

    Värnamo, Sweden
  • Schaublin 102N 105-80 010756

    Schaublin 102N 105-80 010756

    • Manufacturer: Schaublin
    • Model: 102N 105-80
    • Spindle bore: 18 mm

    Quick-closing colletchuck, collets F27, 3-jaw chcuk, 4-jaw chuck, turret head, reverse knee operated & coolant unit.

    Värnamo, Sweden
  • Trusted Seller
    no-image_en.png

    1997 Poreba TRP93x3000

    • Manufacturer: Poreba
    • Model: TRP93
    • Spindle bore: 130 mm

    Digital readout Sony Magnescale steady rest bull nose live center live center jaw plate etc. This information is prepared to the best of our ability - but is not binding in detail. All prices are exclusive of VAT...

    Gnosjö, Sweden
  • Trusted Seller
    no-image_en.png

    Schaublin 102N-80

    • Manufacturer: Schaublin
    • Model: 102N80
    • Spindle bore: 32 mm

    Tailstock top-/cross slide turret with place for 6 pcs tools lever slide (cross) collet chuck with ~40 pcs collets tool post tool holder drill chucks coolant tank with pump etc. This information is prepared to th...

    Gnosjö, Sweden
  • no-image_en.png

    Poreba TRP93 Centre Lathe

    • Manufacturer: Poreba
    • Model: TRP93

    Good condition Poreba TRP93 Centre Lathes available between 1996 and 2007 years. Located in USA and other countries. Click request price for more information.

    USA
12

Overview

Centre lathes, also known as engine lathes, are versatile machining tools used for precisely cutting, shaping, and finishing metal or wood. They are essential in metalworking and woodworking for creating cylindrical objects, threading, and drilling. Centre lathes provide high accuracy and can handle a variety of materials, making them a staple in manufacturing and repair shops.

FAQ

What should I look for when buying a used centre lathe?

Check the lathe's overall condition, including the bed, spindle, and tailstock. Verify the machine's precision and look for any signs of wear and tear. Reviewing maintenance records can also provide insight into its history.

How do I ensure safe shipping for a centre lathe?

Use a specialized machinery transport service. Secure the lathe properly with straps and padding to prevent movement and damage during transit. It's also advisable to disassemble any removable parts.

What is the maintenance routine for a centre lathe?

Regular maintenance includes cleaning the machine, lubricating moving parts, and checking for wear on the gears and belts. It's essential to follow the manufacturer's maintenance schedule and guidelines for optimal performance.