Used Heat Exchangers in Bavaria, Germany

NH3 condensers

• Manufacturer: Kelvion Holding GmbH

Additional title: plate heat exchanger | Operating pressure side 1: 10 bar | Operating pressure side 2: 25 bar | Operating temperature: 90 °C | Weight: 936 kg | Base construction: on frame

Flash pasteuriser

• Manufacturer: GEA Group Aktiengesellschaft

Flash pasteurising to stabilise beverage quality. The product is heated via a plate heat exchanger and held at pasteurising temperature for a defined amount of time, after which it is then cooled down again.

Flash pasteuriser

• Manufacturer: GEA Group Aktiengesellschaft

Flash pasteurising to stabilise beverage quality. The product is heated via a plate heat exchanger and held at pasteurising temperature for a defined amount of time, after which it is then cooled down again.

Flash pasteuriser

• Manufacturer: API Schmidt-Bretten GmbH Co. KG

consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank ...

glycol cooler

• Manufacturer: vbw-weihenstephan

Additional title: plate heat exchanger | Operating pressure side 1: 16 bar | Operating pressure side 2: 16 bar | Operating temperature: 90 °C | Weight: 638 kg | Base construction: on frame, insulated

wort cooler

• Manufacturer: Alfa-Laval

One-stage plate heat exchanger for cooling cast-out wort.

2-vessel-brewhouse

• Manufacturer: Škrlj

2-unit brewing system mounted on a stainless steel frame as a brewing block. This consists of the following components: - Stainless steel mash/lauter tun for mashing, mashing and draining the mash. Separate cont...

2-vessel-brewhouse

• Manufacturer: Škrlj

2-unit brewing system mounted on a stainless steel frame as a brewing block. This consists of the following components: - Stainless steel mash/lauter tun for mashing, mashing and draining the mash. Separate cont...

2-vessel brewhouse

2-vessel brewhouse, consisting of: - KASPAR SCHULZ mash and wort kettle for up to 80 hl per brew. Built approx. 1980, directly fired by means of a 2-stage gas burner (renewed in 2000). Stainless steel vat. Agita...

5-device brewhouse in block construction

• Manufacturer: Apparatebau Nordhausen

10 hl 5-device brewhouse from Nordhausen consisting of the following components: - 2 roller mill: From Mühlen-, Maschinen- und Anlagenbau GmbH Zeitz with a capacity of 200 kg/h. The rollers measure 250 mm in dia...

1987

Capacity approx.: 700 hl/h | Operating working pressure: 3 bar | Design temperature: 100 °C

2002 Hosokawa Alpine Ultraplex UPZ 160 Pharma System

• Manufacturer: Alpine

Fully refurbished Hosokawa Alpine UPZ 160 Pharma used system by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is per...

Freestanding distillery unit - 350 liter capacity 19-00085L 19-00085L

Cat. no.: 19-00085L Condition: New Units: 1 Freestanding distillery unit - 350 liter capacity Equipment: - Heating: by steam (combustion chamber with water bath for an extra charge) - Steam jacket / water bath 4 ...

wort kettle

• Manufacturer: Huppmann

Wort kettle with external tube and shell heat exchanger as wort boiler; with punp and fittings.

Drying kiln

• Manufacturer: Schmidt-Seeger AG

Plant for kilning green malt. Hot air is generated at a steam-heated heat exchanger and passed through the kiln by means of a fan. It is possible to regulate the proportions of fresh and circulating air by means ...