Used Processing in Wallonia, Belgium

NEW gassing units LÜBER, type LW-FDA 1640

• used

• Manufacturer: Lüber
• Model: LW-FDA 1640

Brand Lüber With heating 16 kW Max core weight 80 kg (± 55 l) With contactor control With stainless feeder tank 30 l Compressed air connector 1,5" (Ø 40 mm) With micro pump, gasdosing by rotameter Compressed air ...

390 mm x 390 mm x 200 mm, 25 kg

• used

Moulding box, 560 mm x 360 mm x 80 mm; 12 kg, rolled profile

• used

Moulding box, 560 mm x 360 mm x 95 mm, 15 kg, rolled profile

• used

560 mm x 400 mm x 95/95mm (pair), 32 kg

• used

in good condition, pairs of moulding boxes, distance between axles : 640mm, with 2 holes on a sise diamt. 30-35mm

700 mm x 500 mm x 100/100 mm (pairs), 19 kg

• used

Moulding box GS, iron, 1360 mm x 1140 mm x 170 mm, 365 kg

• used

With trunnions, round and oval sleeces, Ø 47 mm With conish clamps and traverses

920 mm x 840 mm x 250 mm, good casting plates, GS, 190 kg

• used

With trunnions and sleeves, Ø 45 mm With conish clamps, crossbeams

Mold turnover machine IMF, 1500 mm

• used

On a foot All movements hydraulic Weight: 1200 kg | External dimensions: 3250 mm x 1500 mm, h. 2450 mm | Useful dimensions: 1500 mm x 1400/2800 mm | Clamping capacity: 450 mm - 1500 mm

2002 Induction furnace ABP, 2 x 8 t, 250 Hz, 7,3 MW

• used

• Manufacturer: ABP

6100 kW, 20000 V Primary voltage: 20.000 V, frequency: 250 Hz 24 pulses Furnace installation consisting of: - 2 x furnace body 8 t, on load cells - 1 x electric power-desk - 1 x pump station - Control desk with P...

1998 Thermical reclamation plant, RICHARDS, ± 3 t/h

• used

Thermal sand reclamation 2-3 t/h, gas-heated Installation consisting of: - Heating chamber - Loading conveyor with sand hopper ± 2 m³ - Fluid bed cooler RICHARDS, air and water cooled - Electric control desk with...

Blower, 4 kW

• used

For aeration or cooling Weight: 100kg | External dimensions: 1200mm x 760mm, h. 1070mm | Motor: 4 hp, 500 V, 1420 rpm

Conveyor screw, 1450 x 105mm

• used

• Manufacturer: SCHNECKENBAU

Type: TS200/5500, serial number: 01/2981 Useful dimensions: outlet: Ø105mm, inlet: Ø110mm Gearmotor SEW, type: FA37/GD190S4, 1,1 kW, 1400/ 59 rpm, 220/380 V Axle base between entrance and exit 1450mm Pipe Ø100mm ...

Bench polisher 1side on the right

• used

With protection/extraction hood stainless Extraction rocket Ø150mm Without control Bore Ø100mm With dust drawer

Bench polisher 1side on the right

• used

Motor WEG, 5,5 kW; 955 rpm; 380/660 V With protection/ extraction hood stainless Extraction rocket Ø150mm Without control Bore Ø100mm With dust drawer