Used Machine Tools in Hesse, Germany

HERMLE FU 710 HS 49/0

• Manufacturer: Hermle

Additional Features Used universal milling machine with manual control for longitudinal table movement Accessories Complete electrical equipment, coolant system

SCHAUBLIN Typ 53

• Manufacturer: Schaublin

Used universal milling machine, SCHAUBLIN, Type 53, Serial No. 926, year of manufacture unknown Accessories Complete electrical equipment, digital display, RSF electronics for 2 axes, cutter head, coolant system,...

JUNG RA 38

• Manufacturer: Jung

Addition: Little-used and therefore very well-preserved radius dressing device. Accessories: Racing arm RA 1, RA 2, and RA 3, 3 dressing inserts, DT 3 diamond dressing tool, 2 stops to limit the turning travel, 5...

2000 NAGEL SCD 200 1113-235072

• Manufacturer: Nagel
• Power requirement: 12 kW

Until now, the machine has machined the parts in a line, i.e. without interruption. Piston rods are usually machined with a gap, for which it is necessary to place the finishing stone only when the part runs unde...

SCHLEITH & Co. No. 5

• Manufacturer: SCHLEITH & Co.

Additional Precision vise for surface grinding machines Accessories Double-sided chip grooves Further information Jaw width 100 mm, jaw height 40 mm, clamping range 125 mm, overall height 80 mm

Rotating, swivel and tilting table DECKEL

• Manufacturer: Deckel / Maho

Add-on Very well-maintained rotary, tilt, and swivel table, suitable for: FP 3 L; FP 3 LG; and FP 3 LV Further information 6 T-slots 16 mm, T-slot spacing 90 mm, horizontal rotation to the right and left by 45° e...

SUPER CONDOR - 16 - Column Drill with Workbench

• Manufacturer: Condor

Workbench with contents, consisting of: e.g. SUPER CONDOR 16, GEORG SCHLITT, belt sander, sheet metal shears, metal open-fronted storage bins

1989 DECKEL FP 4 MA

• Manufacturer: Deckel / Maho
• Model: FP 4

Additional Used CNC tool milling machine, equipped with CONTOUR 2 control Accessories Electrical equipment, coolant system, chip collection tray, hydraulic tool clamp

2002 DECKEL MAHO DMU 60T 1113-210055

• Manufacturer: Deckel / Maho
• Model: DMU 60 T

5-axis machine Rotary table B-axis Control type: CNC | Control name: Heidenhain TNC 426/430 | Freight basis: FCA | X-off: 630 mm | Y-off: 560 mm | Z-way: 560 mm | Machine weight approx.: 6,5 t | Number of axes: 5...

1986 MORI SEIKI MV 45 1113-23031

• Manufacturer: Mori Seiki
• Model: MV-45
• Spindle taper: CAT 40
• Power requirement: 20 kW

Vertical machining center 20kW is the nominal value. The spindle only needs 7.5 kW. It looks like 15kW will be enough.

2002 STAMA MC 536 /S 1113-2100078

• Manufacturer: Stama
• Model: MC
• Power requirement: 36.8 kW

Travel path can be used as a whole or divided into two areas for pendulum machining. 3 axes HSK 100

Clamping angle

Clamping surface: 400 x 400 mm Support surface: 300 x 400 mm Clamping surface with 4 horizontal and vertical T-slots each, for T-nuts: M 12 for groove width: 14 mm Groove spacing: 100 mm Weight: 102 kg

1972 BÜCHE RTW 30

• Manufacturer: BÜCHE

Additional Equipment Used horizontal/vertical rotary table with tailstock for horizontal operation Accessories 1 indexing disk for indirect indexing