Used Presses in Flanders, Belgium

Trusted Seller
HL 450 ton 4 column press
- Manufacturer: HL
- Capacity: 450,000 kg
Doorgang tussen de staanders: 780 mm Maximale ramverstelling: 800 mm Afstand tussen tafel en ram: 1200 mm Tafeloppervlak: 1200 x 780 mm Elektromotor: 30 kW Gewicht: 11 ton 4-koloms hydraulische pers hoge sluitsn...
Deinze, Belgium
Trusted Seller
HL 200 ton 4 column press
- Manufacturer: HL
- Capacity: 200,000 kg
200 ton slag: 600 mm tafelafmetingen: 600 x 600 mm hoogte tussen tafel en stempel: 1100 mm
Deinze, Belgium
Trusted Seller
HL 200 ton 4 column press
- Manufacturer: HL
- Capacity: 200,000 kg
200 ton stroke: 600 mm table dimensions: 600 x 600 mm height between table and stamp: 900 mm
Deinze, Belgium
Trusted Seller
Adolf Friz 615 ton panel press
- Manufacturer: Friz
Particle material can be put on the table, table is fed into the press and after curing a sheet will roll out of the press Pressing force: 615 ton Table size of the press: 3600 x 2300 mm 2 heated tables - with o...
Deinze, Belgium
Trusted Seller
Colly 150 ton mobile straightening press
- Manufacturer: Colly
- Capacity: 150,000 kg
Type: PL.15.20.4 (presse à planer) with movable cylinder Horizontal movement of portal: 3100 mm Movement of cylinder (left to right): 1800 mm
Deinze, Belgium
Trusted Seller
Nieland dish end forming press
- Manufacturer: Nilland
- Capacity: 300,000 kg
This portalpress is suitable for the deformation/deforming of steel plates. For the width and thickness of the plates the general rule applies: 10 ton per mm platethickness. Between columns: 5000 mm
Deinze, Belgium
Trusted Seller
Quiri 150 ton Dish end forming press
- Manufacturer: Quiri 150 ton
- Capacity: 150,000 kg
This portalpress is suitable for the deformation/deforming of steel plates. For the width and thickness of the plates the general rule applies: 10 ton per mm platethickness. Machine Height: 4200 mm (600mm in floo...
Deinze, Belgium
Trusted Seller
Quiri 150 ton Dish end forming press
- Manufacturer: Quiri 150 ton
- Capacity: 150,000 kg
This portalpress is suitable for the deformation/deforming of steel plates. For the width and thickness of the plates the general rule applies: 10 ton per mm platethickness. Machine Height: 4200 mm (600mm in flo...
Deinze, Belgium
Trusted Seller
Bauer 400 ton Dish end forming press
- Manufacturer: Bauer 400 ton
- Capacity: 400,000 kg
This portalpress is suitable for all shipbuilding activities relative to the deformation/deforming of steel plates. For the width and thickness of the plates the general rule applies: 10 ton per mm platethickness...
Deinze, Belgium
Trusted Seller
LVD 600 ton Dish end forming press
- Manufacturer: LVD - Strippit
- Capacity: 600,000 kg
Deze portaalpers is geschikt voor de vervormen/deformeren van stalen platen. Voor de breedte en dikte van de platen geldt als algemene regel: 10 ton per mm plaatdikte. Is volledig gereviseerd Capaciteit: 600 ton ...
Deinze, Belgium
Trusted Seller
Arlo press heated plates 25 ton
- Manufacturer: Arlo
Wij kunnen onze nieuwe Arlo-persen ook voorzien van verwarmde platen. - elke temperatuurspecificatie - elke tafelgrootte Neem contact met ons op voor meer informatie
Deinze, Belgium
Trusted Seller
2005 Laufer 500 ton press for composite mat.
- Manufacturer: Laufer
Formerly used to manufacture flowerpots using composite materials. step 1: wood granules are heated in dia under high pressure step 2: flowerpots are pressed during heating cycle, cooled down afterwards and aut...
Deinze, Belgium
Trusted Seller
Favrin rupture discs for folding press
- Manufacturer: Favrin
cast iron rupture disc for Favrin folding press gietijzer breekplaten voor Favrin vouwbank dem-rondelles de sécurité en fonte pour plieuse Favrin
Deinze, Belgium
Trusted Seller
Valette panel press 410 ton
- Manufacturer: Valette
- Capacity: 410,000 kg
formerly used to manufacture (sandwich)panels/triplex 300 bar dia cilinders: 300 mm Furnierpressen - Conveyor press - Composit press - Heizplattenpressen
Deinze, Belgium
Trusted Seller
Becker panel press 650 ton
- Manufacturer: Becker
- Capacity: 650,000 kg
vroeger gebruikt voor de productie van (sandwich)panelen/triplex diameter cilinders: 170 mm Capaciteit: 650 ton Maximale ramverstelling: 1000 mm Doorgang tussen staanders: 2000 mm Afmetingen van de tafel: 3250 x ...
Deinze, Belgium