Used Processing in Missouri, USA

2022 FURUKAWA 1450ED w/ 2925 HRS & 1183 IMPACT HRS. 510132

• Manufacturer: Furukawa

(2022) FURUKAWA 1450ED w/ 2925 HRS & 1183 IMPACT HRS. (2022) FRD 1450ED with 2925 hours on Cummins 6.7 engine, 1183 impact hrs on 26KW hammer (re-sealed at 1040hrs) & 353 CFM compressor. Set up for T-45 M/F steel...

Barber-Greene 24×37 Channel Conveyor 163071

• Manufacturer: Barber Greene

Make: BARBER-GREENE Model: 24×37 Type: PORTABLE CHANNEL CONVEYOR STACKER Barber Greene portable channel conveyor stacker with tires. Has small feed hopper, drive motor at mid conveyor. 2-ply belt in fair conditio...

SHOPBUILT 24″ X 80′ TRUSS CONVEYOR (24″ DEEP TRUSS) 162011

• Manufacturer: Shopbuilt

SHOPBUILT 24″ X 80′ TRUSS CONVEYOR (24″ DEEP TRUSS) Shopbuilt 24″x80′ truss conveyor (24″ deep truss) with 3x3x1/4 main cord & 2x2x1/4 lattice. 35 degree sealed idlers & 2 ply belt (good). Has gearbox, but no mot...

TAMROCK ZOOM TRACK HYDRAULIC DRILL 510118

• Manufacturer: Tamrock

Tamrock Zoom track model 600. Catt 3116 engine with approx 1000 hours. Unit has 8915 hours, drifter 7275 hours. Needs new seat and to be cleaned up. Drill runs and was working when parked.

2002 TAMROCK 700-2 HYDRAULIC DRILL WITH 6876 HRS & 2981 IMPACT HRS 510136

• Manufacturer: Tamrock

(2002) TAMROCK 700-2 HYDRAULIC DRILL WITH 6876 HRS & 2981 IMPACT HRS (2002) Tamrock 700-2 hydraulic drill with 6876 hrs on Cat 3126 engine and 2981 impact hours. Set up for T45 steel with rod changer. Overall, go...

SHOPBUILT 30″ X 50′ TRUSS CONVEYOR 162013

• Manufacturer: Shopbuilt

SHOPBUILT 30″ X 50′ TRUSS CONVEYOR Shopbuilt 30″x50′ truss conveyor with 3x3x1/4 main cord & 2x2x1/4 lattice. 45 degree idlers, 2-ply belt, lagged head pulley, wing-tip tail pulley, & gearbox (no motor). Good con...

JOY MS-2A 530020

• Manufacturer: Joy

Year: MS-2A air track drill with Joy VCR360 hammer, square boom, operator noise sheild, and operator controls. Includes dust collector, but not installed. Drill is ready for work.

BARBER-GREENE 30″ X 42 162009

• Manufacturer: Barber Greene

Year: 3 sets of legs and 20″ OD wing tail pulley. Conveyor has 20 degree Marco idlers and Dodge TD-7 gearbox and electric motor. Wiring and starters included. Good condition.

Dust Collector, Cartridge, CECOaire, 23,500CFM #5991054

• Manufacturer: CECOaire

Used CECOaire system airflow of 23,500 cubic feet per minute (CFM) 75/100 horsepower motor. System includes all components, electric boxes, wiring, water suppressor equipment, and complete ductwork. Less than 30 ...

Rotary Kiln, 5.5' X 32-1/2', Maxon Burner, Feeder - #4673732

• Manufacturer: Maxon
• Model: 400

Rotary Kiln, 5-1/2' diameter X 32 1/2 feet long shell. Product is fed by 7' long screw feeder and discharge is controlled by a Rotary Air Lock valve. Includes drum drive with motor and gear reducer. Equipped with...

Mixer, Ribbon, 600 CF, Carbon Steel, Double Ribbon, #5991223

600 cu. ft Double Ribbon Mixer, constructed of carbon steel, featuring an end discharge design. Powered by an approximately 50 HP motor, the drive system includes a gearbox with a chain and sprocket assembly. Pre...

Dust Collector, Stationary, Spencer Industravac, Model SD-325B #5318614

• Manufacturer: Spencer Industravac

Spencer Industravac Central Vacuum Unit, Model SD-325B. Delivers heavy-duty performance with a 25 HP motor in a stationary design.