Used Processing in Quebec, Canada

Used 600 Gallon Tank (Vessel), 316 Stainless Steel

-design pressure: 14.9 psi @ 100 deg.f -interior dimensions: 48'' diameter x 72'' straight side, plus 8'' dish top & 6'' dish bottom -top side and bottom ports: 2'' -top inlets: one 6'' (cip spray ball), three...

Used 5 Gallon Jacketed Tank, 316 Stainless Steel

• Manufacturer: Groen

-jacket rated: 45 psi @ 650 deg.f -national board no. 4489 -dimensions: 12'' diameter x 12'' deep -open top with lid -overall height: 40''

Used Key Iso-Flo Vibratory Feeder, 36'' Wide X 204'' Long

• Manufacturer: Key Iso-Flo

-manufacturer: key iso flo (2018) -model: sh01-049023 -feeder dimensions: 36'' wide x 204'' long -two vibrating motors: 1.1 kw, 460 volt, 890 rpm -top feed chute: 30'' x 16'' -all stainless steel constructio...

Used 800 Gallon Tank, Stainless Steel

-dimensions: 60'' diameter x 66'' straight side -open top -dish bottom -center discharge: 4'' tri-clamp -with mixing baffles -tank is on four carbon steel legs with pads -overall height: 99'' -previous use...

Used Tranter Plate Heat Exchanger, 161.5 Sq. Ft.

• Manufacturer: Tranter

-manufacturer: tranter, superchanger -model: ux 226 uj 42 -inlet & outlet: 4" -working pressure:125 psi @ 212 deg.f. -national board no. 36693 -crn no. d3827.6 -serial no. sb 773 -stainless steel plates -...

Used Pall Cartridge Filter, 2" x 2''

• Manufacturer: Pall

-max psi: 275 psi @ 100 deg.f -national board no.47120 -316l stainless steel contact parts -a four (4) cartridge model

Used Kettle Scrape Surface Agitator, 2 HP

-motor: 2 hp, 330/575 volt, 1740 rpm -gear reducer ratio: 31.23/1 -output rpm: 56 -stainless steel shaft diameter: 2.25'' -two sets of 12 scrapers -each scraper dimensions: 2'' x 4'' -previous use: cosmetic...

Used 200 Gallon Tank, 316 Stainless Steel, Insulated

• Manufacturer: Sprinkman

-interior dimensions: 50'' diameter x 27'' straight side -inverted dome bottom to 4'' flanged discharge -open top with two hinged lids -top inlets: two 2'' tri-clamp -side ports: two 3'' flanged -2'' insulat...

Trinco Master Model 60X48SL/Deluxe

• Manufacturer: Trinco

The Trinco™ Master Model 60x48SL Deluxe Blast Cabinet delivers heavy-duty performance with rugged 14-gauge steel construction, bright LED lighting, and a spacious 60" x 48" work area. Equipped with a 600 CFM abra...

Trinco 36 BP Blast Cabinet

• Manufacturer: Trinco
• Model: 36 BP

Trinco Dry Blast Cabinet with Dust Collector Heavy-duty 14-gauge steel cabinet designed for cleaning, deburring, finishing, etching, and more. Features tungsten carbide nozzle, enclosed foot valve blasting contr...

Trinco 24 BP Blast Cabinet

• Manufacturer: Trinco
• Model: 24 BP

Trinco Blast Cabinet with BP Dust Collector Heavy-duty 14-gauge steel cabinet with carbon screen floor, tungsten carbide nozzle, enclosed foot valve blasting control, rubber gloves, and large 19.5” x 12” safety ...

Used Herma H300 Labeller With Conveyor

• Manufacturer: Herma

-equipment fully rebuilt and in good working condition -manufacturer: Herma -model: H300 SRK16 -with FS01 sensors -with table top belt conveyor: 4'' wide x 120'' long -max label height: 6'' -suitable for ro...

Used Sweco Vibrating Screen, 48''

• Manufacturer: Sweco
• Model: LS48S88

-manufacturer: Sweco -model: LS48S88 -serial no. LS48-470-41 -motor: 2.5 HP, 230/460 volt, 1120 RPM -three stainless steel decks -with top lid -previous use: -currently equipped with two screens, 6M and 14...

Used Twin Shell Blender, 5 Cubic Feet

-stainless steel contact parts -dimensions: 19'' diameter x ''36 -discharge: 7.5'' -motor: 2 hp, 208-230/460 volt, 1725 rpm -reducer ratio: 100:1 -output rpm: 17 rpm approx. -control box, start/stop button ...

Used Pulva Pulverizer Hammer Mill, Swinging Hammers, 20 HP

• Manufacturer: Pulva

-manufacturer: Pulva Pulverizer -model: B type FS -cone hopper feeder: 15'' x 16'' x 11'' deep -motor: 20 HP, 208-230 volt, 3505 rpm -with dual feed screw conveyor -motor: 1/2 HP, 230/460 volt, 1725 rpm -pr...