Used Processing in Hiroshima, Japan

1997 Izumi Food Machinery NB36SS-163-6-HWW
- used
- Manufacturer: Izumi
Plate material: SUS316 Heat transfer area: 56.52m2 13500L/h Number of plates: CH①77, CH②72, CH③14
Hiroshima, Japan
2003 Mitsui Mining FM150L
- used
- Manufacturer: Mitsui mine
Capacity: 150L With control panel Power: 30kw/15kw | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
1990 [Tanabe Willtech] Basket type centrifuge 36inch
- used
- Manufacturer: Tanabe Wiltech
Fully automatic bottom discharge type. Hydraulic driven scraper. Explosion-proof low-speed motor 0.8Kw 200V.
Hiroshima, Japan
[TANABE WILTECH] Basket type centrifuge 55inch
- used
- Manufacturer: Tanabe Wiltech
Fully automatic bottom discharge type. Hydraulic drive for scraper. Low speed motor 2.2Kw 200V. Star-delta startup board available.
Hiroshima, Japan
2006 Hitachi Zosen TFAP-10-32MKII
- used
- Manufacturer: Hitachi Zosen Corporation
Fully automatic compression type 1000mm x 32 chambers Filtration area: 47.4 m2 Filtration volume: 835L Hydraulic unit: 2.2kw
Hiroshima, Japan
2004 Hitachi Zosen TFAP-10-18MKII
- used
- Manufacturer: 日立造船
Fully automatic compression type 1000mm x 18 chambers Unmaintained, but in fairly good condition Complete books and control panel available Filtration area: 26.6 m2 Filtration volume: 306 L
Hiroshima, Japan
2011 Japan H-Classifier PFM-8C
- used
- Manufacturer: Japan Filter
Filter plate: 800 square x 8 chambers Total filtration area: approx. 8 m2 Total filtration volume: approx. 160 L Cake thickness: 25mm Huffing pressure: 0.4MPa Squeeze pressure: 0.5MPa
Hiroshima, Japan
Japan Filtration System 390m/m x 9 chambers ES2C type
- used
- Manufacturer: Japanese filtration equipment
Specifications: Huffing area: approx. 2 m2 Huffing capacity: approx. 15L Cake thickness 15mm Huffing pressure 0.4MPa Tightening pressure 50MPa Remarks:[High pressure]. Maximum working pressure 72MPa Discharge vol...
Hiroshima, Japan
2001 Irie Shokai PBV-1000
- used
- Manufacturer: Irie Chamber of Commerce
Total capacity 1L / Finishing capacity 0.7L Rotation speed 15-35 rpm Heater (temperature control)
Hiroshima, Japan
3500L Cylindrical vertical type
- used
Agitator: 5.5kw (Cyclo Decelerator) Jacket：SUS304 Drawing available
Hiroshima, Japan
Red Bam Engineering VSP - 25P
- used
- Manufacturer: Akitake Engineering
Powder Conveying System, Sanitary Specifications (Conveying Piping 2S) Suction volume: 2500L/hr Air drive
Hiroshima, Japan
2007 Anlet BE80E
- used
- Manufacturer: Anlet
Air volume: 5 m3 / min Pressure: 55 kPa With materials
Hiroshima, Japan
2017 Chikara Engineering HANG48×800
- used
- Manufacturer: Tikara Engineering
Fully automatic low-discharge type Maximum capacity 480L Rotation speed 1080rpm Centrifugal effect 796G Scraping device hydraulically driven With control panel
Hiroshima, Japan
Alfa Laval AFPX407
- used
- Manufacturer: Alfa-Laval
- Model: AFPX
Concentrator AFPX407BGP-74-60 Power: 7.5kw 4P200V | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
2003 Tetra Pak DMRPX407
- used
- Manufacturer: Tetra Pak
11kw clarifier Control panel/disassembly tool/Instruction manual available DMRPX407SGP-34
Hiroshima, Japan