Used Belt Dryers

Brock SQ16 Grain Dryer – 326 Bushel Capacity | 15 HP Fan | Auger & Chain Unload | 27'2" Length

• Manufacturer: Brock Grain Systems

53137001 Used Brock Grain Systems Grain Dryer, Model SQ16, 326 bushel capacity. 15 HP fan, 3HP auger load, 2HP Chain unload. 16'4" column length. 27'2" overall length. 14'2 overall height.

McKenzie Tray-and-Cart Tunnel Dryer – 1.3M BTU | 1,595 Sq. Ft. Capacity | Stainless | 8 Carts | Digital Controls

53147071 Used McKenzie Tray-and-Cart Tunnel Dryer, manufactured by Commercial Dehydrator Systems, features 1.3 million BTU burner (natural gas, propane or butane/propane mix), 15 HP circulating fan, digital contr...

Pre-Owned Rotary Steam Dryer by Drying Solutions – 7.3 MMBTU/hr, Co-Current Flow

53493006 Used Drying Solutions Rotary Steam Dryer. 304 Stainless steel construction; Rated at 1500 lbs/hr capacity with co-current single-pass superheated steam; 900 lb/hr. evaporation rate; Set for 65% moisture ...

Pre-Owned Barr Rosin Fluid Bed Dryer – Natural Gas Heater, 744 lb/hr Evaporation

• Manufacturer: GEA Barr-RosinGEA Barr-Rosin

53493004 Used Barr Rosin Fluid Bed Dryer. Design rate 4,244 lb/hr with infeed moisture at 20% by wt, and final product output at 3% by wt; 744 lb/hr evaporation capacity; Carbon steel construction; Comenco system...

Aeromatic Aeroglide C1 120-65 RGC Fluid Bed Dryer – 5,000 lbs/hr, Stainless Steel, Natural Gas, Built 2005

• Manufacturer: AeromaticAeromatic

54039001 Used Aeromatic Aeroglide Dryer, Model C1 120-65 RGC. Up to 5000 lbs/hr (dependent on product); Drying Bed Area 350 sq. ft. drying area; 140 sq. ft. cooling bed area; 9'9" bed width; 152.4mm (6") max. fir...

Carmen Model FBP-562 Vibratory Fluid Bed Dryer System – 45" x 17'6", Dual Zone, SS, w/ Crusher, Screener, Sifter & Heater

• Manufacturer: CarmanCarman

54008001 Used Carmen Model FBP-562 Vibratory Fluid Bed Dryer System 45" x 17'6", Dual Zone, SS, w/ Crusher, Screener, Sifter & Heater. Perforated bed approximate 45" wide x 17'6" long, (2) drying zones, (1) cool...

Sandvik Industrial Belt Flaker 47.5" x 43', Asphalt Pastille, 32' Cooling Zone, 2HP Drive

• Manufacturer: Sandvik

10288055 Used Sandvik Belt Flaker. 47.5"W x 43'L, stainless steel belt, knife discharge. Has Sandvik Rotoformer - pastel. 32' of cooling with spray nozzles and water collection. 2HP main drive, 3/60/230/460V. Has...

Sandvik Belt Flaker with Rotoformer – 47.5" x 43' SS Belt, Knife Discharge, Controls, 2 HP Drives

• Manufacturer: Sandvik

10288054 Used Sandvik Belt Flaker with Rotoformer for pastels, 47.5" wide x 43' long overall length.Stainless steel belt with V-belt tracking under side. Knife discharge. Equipped with rotoformer for applying pas...

New MKM CD 250 Atomizer – 9000–13,000 RPM, SS316 Spray Disk, RPM Sensors, Insulated Jacket

53989001 Unused / New MK Manufacturing Co, Atomizer, Model MKM CD 250 features a feeder cover, retainer, sleeve, and feeding pipe made from SS 316 stainless steel, all tested, machined, and balanced as required, ...