• 1960 Cincinnati Hydrashift LRT 15 1W3H6H-39

    No price - Washington, PA, USA
    • Manufacturer: Cincinnati
    • Spindle Bore: 1.75 in 44.45 mm
    • Distance between Centers: 60.00 in 1524 mm

    steady rest, taper attachment ways: flame hardened and ground | power: existing | weight: 3500 lbs 1587.57 kg | chuck type: 4-jaw independent | spindle bore: 1.75 in 44.45 mm | spindle nose: l-1 | ...

  • Cincinnati Milacron Verci-Power 440-18 Small Lathes/Mills 23924

    No price - Rockville Centre, NY, USA Recently Added
    • Manufacturer: Cincinnati
    • Spindle Nose: No. 50 Taper

    this is a heavy duty mill in very good condition. data on motors for this machine : spindle motor - 30hp, 1750rpm knee motor - 3-5hp, 1750rpm coolant motor - 1/4hp, 1725rpm electrics - 220/440/3/6...

  • Cincinnati 15 Hydra Lathe

    $5,800 - Washington, PA, USA
    • Manufacturer: Cincinnati

    cincinnati model hydrashift lrt 15 serial number 1w3h6h-39 year 1960 swing over bed 16.88 in 428.75 mm swing over cross slide 9.63 in 244.6 mm distance between centers 60.00 in 1524 mm x – cross s...

  • 1960 Cincinnati 18” Tray Top with Gap 2W4U5E-13

    No price - Washington, PA, USA
    • Manufacturer: Cincinnati
    • Spindle Bore: 1.75 in 44.45 mm
    • Distance between Centers: 108.00 / 120.00 in 2743.00 / 3045.00 mm

    steady rest, full length hydraulic, scanamatic tracer

  • Cincinnati 18 Tray Top with Gap and Tracer

    $14,500 - Washington, PA, USA
    • Manufacturer: Cincinnati

    category: lathes, shaft type, manual manufacturer: cincinnati model: 18" tray top with gap (model number, and slant bed / flat bed) serial number: 2w4u5e-13 year: 1960's swing over bed: 20.00 in. 5...

  • 1979 Cincinnati Cinturn 24C-HD 22483

    No price - Melville, NY, USA
    • Manufacturer: Cincinnati
    • Spindle Bore: 4"
    • Spindle Nose: A1-15

    cincinnati acramatic 950 cnc control 24" chuck 5-position end turret 8-position crown turret 75 hp main motor coolant

  • 42" x 32" Cincinnati Hydrospin Spinning Lathe

    $9,950 - Casa Grande, AZ, USA
    • Manufacturer: Cincinnati

    (1) used cincinnati hydrospin spinning lathe specifications: swing over bed......................42" swing over cross-slide..............24" swing in gap........................ gap length............

  • 1997 Cincinnati Falcon 200 ERL CNC Lathe, Acramatic 2100 CNC, RS232C Interface

    No price - Helena, AL, USA
    • Manufacturer: Cincinnati
    • Spindle Nose: A2-6"/3.15"

    model: falcon 200 s/n: 7048a0a970211 year: 1997 specifications: chuck size...............................8.25" swing over bed...........................20.866" maximum turning diameter................

  • 2000 8" chuck Cincinnati Model Avenger 200T CNC Turning Center

    No price - Elk Grove Village, IL, USA
    • Manufacturer: Cincinnati
    • Spindle Bore: 3 1/8"
    • Distance between Centers: 20.79"

    collet chuck, tool presetter, acramatic 850sx cnc control * low hours *

  • Cincinnati Avenger 200T (2000)

    No price - Altamonte Springs, FL, USA
    • Manufacturer: Cincinnati

    maximum swing 23.54" maximum machining diameter 10.55" maximum machining length 20.79" spindle speed 30 - 5000 rpm spindle nose a2 - 6" hole thru spindle 3.15" number of tools 12 postion turret mai...