HC-YZ800 In-Situ Axial Compression Tester
HC-YZ800 in-situ axial pressure tester consists of a type I manual pump, hydraulic cylinder, intelligent pressure numerical display and high-pressure oil pipe with quick connector. It is mainly used to estimate t...
Shaoxing, China
HC-HD92/HD852 Floor Thickness Tester
It is mainly used to measure the thickness of cast-in-place slabs, concrete or other non-metallic materials such as walls, columns, beams, wood and ceramics. This instrument is mainly based on the principle of el...
Shaoxing, China
HC-YDJ150/YSJ75 In-Situ Single/Double Shearing Machine
HC-YDJ150 in-situ single shear tester is mainly used to detect the shear strength of building masonry, and can meet the in-situ single shear test of various brick masonry. HC-YSJ75 in-situ double shear tester is ...
Shaoxing, China
HC-MD60 High Precision Wire Drawing Instrument
It is suitable for the pull-out test of the grouting fullness of assembled sleeves. It analyzes the grouting fullness of sleeves by measuring the ultimate pull-out load value of embedded steel wires in batches. I...
Shaoxing, China
HC-SJ20 Penetration Strength Tester
HC-SJ20 penetration strength tester is a product specially used for testing compressive strength. The instrument measures the penetration depth, calculates and displays the estimated compressive strength in real ...
Shaoxing, China
HT-20J/JC / 75J/JC/ 20K / 75K Digital Mortar Rebound Tester
Product Features HT-20J/JC、HT-75J/JC： Laser detection module, contactless, frictionless, with long service life and higher accuracy; Built in Bluetooth chip, connected to Haichuang mobile app to achieve real-time...
Shaoxing, China
HC-ZH20 Static Load Tester
This product is suitable for compressive static load tests of pile foundations, foundations, rock foundations and other foundations; static pull-out load tests of anchor piles and anchor rods, horizontal static l...
Shaoxing, China
HT-20A Mortar Rebound Tester
Used for non-destructive testing of the compressive strength of masonry mortar in sintered ordinary bricks or sintered porous brick masonry. Imported high-toughness alloy steel spring has good alkalinity and is m...
Shaoxing, China
SJY-500/800B/1000 Penetration Strength Tester
SJY-500 penetration aerated concrete strength tester is a product specially used to test the compressive strength of autoclaved aerated concrete. It uses a lever-type force method to penetrate the test nail into ...
Shaoxing, China
HCTJ-10T Carbon Fiber Bond Strength Tester
A new instrument suitable for testing the tensile bond strength between carbon fiber sheets and concrete in civil engineering structures. According to the bond strength and the failure mode during tension, the te...
Shaoxing, China
HC-GZ40/60 Micro Anvil
The average rate value of the bullet impact test on the micro steel anvil is [N] = 41 ± 2/60 ± 2
Shaoxing, China
HC-CK105/CK103/CK101 Crack Width Detector
Product Features HC-CK105： Wireless camera probe, quick shooting button for easy operation; The camera probe integrates a synchronous display screen, which synchronizes width measurement data through wireless tra...
Shaoxing, China
HC-V1S/V3S/V5S/V10S Micro Puller
HC-VnS series micro puller is mainly used for anchor force detection of various anchors, such as anchor rods, steel bars and expansion bolts. Its test range is refined, fully in line with the latest standard requ...
Shaoxing, China
HT-225K/KC / 225J/JC Digital Rebound Tester
Nondestructive testing of the compressive strength of concrete structures such as buildings, bridges, and tunnels. Laser detection module, non-contact, frictionless, long service life, higher accuracy (only suppo...
Shaoxing, China
HC-CS202 Crack Depth Tester
HC-CS202 crack depth tester adopts ultrasonic principle and is suitable for crack depth detection of concrete, non-metallic surface, etc. Automatically judge the first wave sound time and amplitude, no manual jud...
Shaoxing, China
Tip: Enter manufacturer, model or keyword