- Trusted Seller
Rotary Compressor Clark 2BF9 - IPP# 206302
- Manufacturer: Clark
Ammonia Compressor C/T 20571. Inlet Casing Design Pressure 2500 PSIG, Outlet Casing Design Pressure 2500 PSIG; Outlet casing Design Temperature 450 Degrees F 1sr Critical speed 5300 RPM, Maximum Operating Tempera...
Princeton Junction, NJ - Trusted Seller
64" CLARK AIKEN SINGLE ROTARY SHEETER
- Manufacturer: Clark
64 "Clark Aiken Single Rotary Sheeter 64” wide Min roll width 23” Max length 73” Min. Length 25.75 Max OD 84” Min OD 33”
South Carolina, USA - Trusted Seller
64" CLARK AIKEN FIXED BED SHEETER 26" - 144" CUT OFF
- Manufacturer: Clark
Clark Aiken Fixed Bed Sheeter 64” wide Cutoff 26”-144” Max roll OD-84” Min roll OD-33” Min roll width-23” 60" pile height Cut to register ,ac drives, slitting, remote squaring , reject gate 1 unwind
South Carolina, USA - Trusted Seller
100" CLARK AIKEN SHEETER NO UNWINDS
- Manufacturer: Clark
Used 100" Clark Aiken Sheeter Model: 1959 Serial: CS 1207 Single rotary knife No unwinds included Conveyor and stacking section included
Moultonborough, NH CLARK TYPE WL 9X17 REBUILT NATURAL GAS COMPRESSOR CYLINDER
- Manufacturer: Clark
“REBUILT” PLEASE READ THE ENTIRE LISTING SO YOU UNDERSTAND EXACTLY WHAT YOU ARE BUYING YOU ARE PURCHASING THE NATURAL GAS CLARK 9X17 CYLINDER IT WAS REBUILT AND NEVER USED WAS KEPT AS A BACKUP STILL IN THE PLASTI...
$2,799 USDCanton, MI- Trusted Seller
52" CLARK AIKEN SINGLE ROTARY SHEETER
- Manufacturer: Clark
One (1) Used 52" Wide Clark Aiken Sheeter Still running
Winfield, NJ - Trusted Seller
Reciprocating Compressor - IPP# 91197
- Manufacturer: Clark
Cast iron cylinder for Clark nitrogen compressor 4" stroke, 12" bore. Max 800 psi.
Princeton Junction, NJ - Trusted Seller
Princeton Junction, NJ - Trusted Seller
Centrifugal Compressor 6,930 m3/h (4,079 CFM) Carbon Steel - IPP# 212809
- Manufacturer: Clark
4,079 acfm rotary air compressor Direct driven by a steam turbine (IPP# 212810) through a gear reducer (IPP# 212811) Pressure Suction 14.07 6400 rpm critical speed 12"" inlet X 10"" discharge Nozzle orientation i...
Princeton Junction, NJ - Trusted Seller
Centrifugal Compressor 19,985 m3/h (11,763 CFM) Carbon Steel - IPP# 212816
- Manufacturer: Clark
11,763 ACFM with seven impellers inlet temperature is 24 degrees F. The average compressibility factor is 0.979. The nozzle orientation up The compressor rpm is 5,875 rpm, with a maximum speed of 6,220 rpm and a ...
Princeton Junction, NJ - Trusted Seller
Centrifugal Compressor 42,440 m3/h (24,979 CFM) Carbon Steel - IPP# 212808
- Manufacturer: Clark
Compound centrifugal compressor with seven impellers and labyrinth seals Inlet pressure is 14.07 psia in the first section and 40.4 psia in the second section Gas handled: air, with an average compressibility fac...
Princeton Junction, NJ 
CLARK 3M
- Manufacturer: Clark
CLARK S/N 3-5-599, C/T 20334. FIRST CRITICAL SPEED 5300 RPM. CASING DESIGN PRESSURE 133 PSIG INLET, 200 PSIG OUTLET. 5900 RPM FIRST CRITICAL SPEED, 7000 RPM MAXIMUM CONTINUOUS SPEED. CASING DESIGN TEMPERATURE 450...
Houston, TX- Trusted Seller
Centrifugal Compressor 62,576 m3/h (36,831 CFM) Carbon Steel - IPP# 216226
- Manufacturer: Clark
Centrifugal compressor C/T # 20967-A HP=14438 Ratio; 3.68. Down Nozzle, set up for a turbine drive.
Princeton Junction, NJ - Trusted Seller
Centrifugal Compressor 7,727 m3/h (4,548 CFM) - IPP# 207980
- Manufacturer: Clark
with Eight impellers. Previously used to increase the pressure of methanol, but can be used for other service. The rated suction is 119.7 PSIA @ 100 degrees F The casing design pressure is 340 psig in both the in...
Princeton Junction, NJ - Trusted Seller
Centrifugal Compressor 7,279 m3/h (4,284 CFM) Carbon Steel - IPP# 212815
- Manufacturer: Clark
4284 ACFM Rated for 9185 hp Pressure Suction 140 Nozzle orientation up. Rpm 10483 Driven by a steam turbine (IPP# 212817) and speed increaser (IPP # 212818). Molecular weight, 17.03 5 Stages, 10,438 rpm speed. 66...
Princeton Junction, NJ
Tip: Enter manufacturer, model or keyword
