Building Filters
- Trusted Seller
CMG TAURUS 100
- Manufacturer: CMG
No. 1 calibrator No. 8 polishing heads No. 4 chamfering units No. 1 blade cutter
Castelleone, Italy - Trusted Seller
Bullnose Edge Polishing Machine Cmg Taurus 100/8
- Manufacturer: CMG
Used bullnose edge polishing for straight and bullnose edges with: - N.1 Calibrator/Water drip group - N.4 bevels - N.7 polishing heads - Thickness of the pieces from 20 to 100 mm
Bergamo, Italy - Trusted Seller
Bullnose Edge Polishing Machine Cmg Taurus 02/8R
- Manufacturer: CMG
Used bullnose edge polishing for straight and bullnose edges with: - Abrasive diameter 130/150 mm - N.4 bevels - N.7 polishing heads - Thickness of the pieces from 20 to 100 mm - Workable width 200 mm - Belt widt...
Bergamo, Italy - Trusted Seller
CMG 700 mm. 30 kw
- Manufacturer: CMG
CMG GRANULATOR 30 kw drive rotor width 700 mm. complete with electric panel
Issogne, Italy - Trusted Seller
2002 CMG TAURUS 100
- Manufacturer: CMG
Material entry: left | Number of polishing mandrels: 8 | Number of polishing spindles: 8 | Number of bevelers: 4
Domegliara, Italy - Trusted Seller
2002 CMG TAURUS 100
- Manufacturer: CMG
751 Lucidacoste per toro Request information Material entry: left | No. of polishing spindles: 8 | No. of bevellers: 4 | Category: POLISHING MACHINES
Domegliara, Italy - Trusted Seller
CMG THERMOFORMING
- Manufacturer: CMG
Extruder: A...35mm new B...90mm refurbished C...70mm new New die 1000mm New continuous feeding gear Con air 4 components with vacuum motors ;gravimetric up to 500 kg/h In line CMG grinder with 2 inverter for the...
Negrar di Valpolicella, Italy 
2005 CMG Welding Lathe
- Manufacturer: CMG
Used Lathe CMG Welding Lathe Diam 1000 Year 2005 Guy: of Welding | Type of: of Welding | Light: 1000 | Diameter: 1000
Solbiate Olona, Italy- Trusted Seller
1998 1 layers CMG/Dolci film blowing machine
- Manufacturer: CMG
Raw material most commonly used are low density polyethylene (LDPE) and High density polyethylene (HDPE). These are often used in blends with other polymers and additives. Exact side trim recycling device Tower n...
Negrar di Valpolicella, Italy - Trusted Seller
Cormons, Italy - Trusted Seller
2013 CMG Inox MTS 320 - 1800
- Manufacturer: CMG
| | Autoclave dimensions mm: 350 x 2000 | Autoclave volume lt: 175 | Installed electrical power kw: 55 | Bildrechte: Woodmercator |
Cormons, Italy - Trusted Seller
2002 1 layers CMG film blowing machine
- Manufacturer: CMG
In a blown film extruder PE granulates (or other polymer) are melted in an extruder and pushed through a circular die extruding a tube of molten polymer. Tube is then inflated to multiples of its initial diameter...
Negrar di Valpolicella, Italy - Trusted Seller
1999 1 layers CMG blown film plant
- Manufacturer: CMG
In a blown film extruder PE granulates (or other polymer) are melted in an extruder and pushed through a circular die extruding a tube of molten polymer. Tube is then inflated to multiples of its initial diameter...
Negrar di Valpolicella, Italy - Trusted Seller
2000 1 layers CMG Blown film extrusion line
- Manufacturer: CMG
In a blown film extruder PE granulates (or other polymer) are melted in an extruder and pushed through a circular die extruding a tube of molten polymer. Tube is then inflated to multiples of its initial diameter...
Negrar di Valpolicella, Italy - Trusted Seller
2002 CMG
- Manufacturer: CMG
CMG-MAM BLOWN FILM EXTRUDER for LDPE extruder with screw diam. 80 mm. Production rate about 150 kg/h die diam. 150 mm. on rotating head haul off unit width 1.200 mm. corona treatment winder mm.1.200 max re...
