Processing » Coating & Laminating » Germany

Building Filters

226

Used processing in Germany

  • Trusted Seller
    Baberan LP 1400 60185

    Baberan LP 1400 60185

    • Manufacturer: Baberan

    Workpiece width min-max mm: 1350 | Workpiece length min- max mm: 3500 | Workpiece height min- max mm: 10-60 | Feed min-max m/min: 10-40 | Brushing machine: Yes | White glue system: Yes | Roller diameter mm: abou...

    Petershagen, Germany
  • Trusted Seller
    2002 Giardina UV roller coating

    2002 Giardina UV roller coating system UV GS 01 FWM + ST/SPC 302/12 100210

    • Manufacturer: Giardina

    Control: Siemens | Workpiece width min-max mm: 85-250 | Workpiece length min- max mm: 1600 | Workpiece height min- max mm: 8-30 | Working width max mm: 300 | Use page: Left | Working height: 950 | Adjustable dir...

    Petershagen, Germany
  • Trusted Seller
    Sorbii Smart Coater M 102470

    Sorbii Smart Coater M 102470

    • Manufacturer: Sorbii

    Workpiece width min-max mm: 1.300 | Workpiece length min- max mm: 350 | Workpiece height min- max mm: about 3 - 80 | Use page: right | Working height: 880 | Paint-applying units: 1 | Feed transport m / min min -...

    Petershagen, Germany
  • Trusted Seller
    2003 Omma FTF-1302 103425

    2003 Omma FTF-1302 103425

    • Manufacturer: Omma

    Workpiece width min-max mm: 1300 | Workpiece height min- max mm: 3-50 | Working width mm: 1400 | Working height mm: 910 | Feed min-max m/min: 2-10 | Ir-zone: Yes | Temperature min-max degrees: 0-400° Celsius ele...

    Petershagen, Germany
  • Trusted Seller
    Tünkers Stacker Laminating machines #30.002

    Tünkers Stacker Laminating machines #30.002

    • Manufacturer: Tünkers

    Equipment: motorized format adjustment via remote control, pneumatic lateral aligning, Siemens control, non-stop device. After arrangement machine can be inspected in production.

    Maulbronn, Germany
  • Trusted Seller
    Bürkle film protection laminating machine

    Bürkle film protection laminating machine Laminating machine 103448

    • Manufacturer: Bürkle

    Workpiece width min-max mm: 400-1300 | Workpiece length min- max mm: 500 | Workpiece height min- max mm: 10-60 | Working width max mm: 1300 | Feed min-max m/min: 5-30 | Rollers heated: Yes | Roller heating: Yes ...

    Petershagen, Germany
  • Trusted Seller
    2015 ULVAC EWA-165

    2015 ULVAC EWA-165

    • Manufacturer: Ulvac

    GENERAL INFORMATION: Manufacturer: ULVAC, Inc., Japan Model: EWA-165 Type: Vacuum Roll Coater (Vacuum Metallizer) Application: Metallization of plastic films (PET/OPP/PE etc.) by aluminum evaporation Useful ...

    Berlin, Germany
  • Steel pipe coating plant

    Steel pipe coating plant

      For sale is a steel pipe coating machine, which was specially developed for the coating of steel pipes. This machine is ideal for industrial use, providing pipes with a protective coating that extends their serv...

      Grenzach-Wyhlen, Germany
    • Trusted Seller
      2007 POWDER COATING LINE

      2007 POWDER COATING LINE

      • Manufacturer: EUROIMPIANTI SRL, WAGNER

      PROFILES LENGTH 2.5 M Qty. 1 Second-hand powder coating line Mfc.: Euroimpianti SRL, Wagner, Built: 2007, Profile length: 2.5 m Consisting of: Spray Pretreatment, Drying Oven, Polymerisation Oven, In-line Cooling...

      Friedrichsdorf, Germany
    • Trusted Seller
      2007 VERTICAL POWDER COATING LINE

      2007 VERTICAL POWDER COATING LINE

      • Manufacturer: TREVISAN COMETAL

      ALUMINIUM PROFILES Qty. 1 Second-hand Vertical Powder Coating Line for Aluminium Profiles Mfc.: Trevisan Cometal Built: 2007 Type: IV/7.00 Weight of profiles: 25...

      Friedrichsdorf, Germany
    • AZO E-240 "stainless steel"

      AZO E-240 "stainless steel"

      • Manufacturer: AZO
      • Model: E-240

      Neustadt, Germany
    • Komfi Aspira Film laminating machine

      Komfi Aspira Film laminating machine

      • Manufacturer: Komfi
      • Model: Aspira

      Built in 2006 Komfi Aspira Laminating machine Max laminating speed 15 m/min Max sheet width 52 cm Sheet size max. 52x74 cm; min. 20x20 cm Paper weight. 115-350g/sqm.

      Helmstedt, Germany
    • Trusted Seller
      FISCHER coating thickness gauge

      FISCHER coating thickness gauge

      • Manufacturer: Fischer

      Coating thickness gauge FISCHER PERMASCOPE® MP0 Base material steel or iron (Fe): Measuring range: 0 ... 2500 µm in plastic case used, tested ! with documentation !

      $340 USD
      Zschepplin, Germany
    • Trusted Seller
      2005 HORIZONTAL POWDER COATING LINE

      2005 HORIZONTAL POWDER COATING LINE

      • Manufacturer: NORDSON & OTHERS

      ALUMINIUM PROFILES Qty. 1 Second-hand horizontal aluminium profile powder coating line Mfc.: Nordson & others Built: 2005 Modernised: 2015 Scope of supply: Qty. 5 Bath tubes ...

      Friedrichsdorf, Germany
    678910

    Overview

    Coating and laminating machines are used in various industries to apply a layer of material onto a substrate, improving its durability, appearance, or functionality. These machines are essential in packaging, textiles, and printing industries, where they help create products with enhanced protective and aesthetic qualities. Coating can include adhesives, protective films, or decorative layers, while laminating involves bonding multiple layers together.

    FAQ

    What factors should I consider when buying a coating and laminating machine?

    Consider the type of materials you will be working with, the machine's speed, the coating or laminating width, and the overall quality and reliability of the machine. Additionally, look for features like easy maintenance and user-friendly controls.

    How do I ensure safe shipping of a coating and laminating machine?

    Make sure to use a reputable shipping company that specializes in transporting heavy machinery. Ensure the machine is properly packed, secured, and covered to prevent any damage during transit.

    What maintenance is required for coating and laminating machines?

    Regular maintenance includes cleaning the rollers and other contact surfaces, checking and replacing any worn-out parts, and ensuring that all mechanical components are well-lubricated. Follow the manufacturer's maintenance schedule for specific guidelines.