Processing » Coating & Laminating

Search By Manufacturer

Search By Country

Building Filters

27317

Used processing

  • Trusted Seller
    1972 PRO ECO Coating Machine

    1972 PRO ECO Coating Machine

    • Manufacturer: Pro Eco

    One (1) used prime-coat coating machine from a coil coating line - Two (2) roll design - Two side coating Basic specs from the line it comes from: Used 54" Coil Coating Line - Manufacture - ProEco / 1972 - Nomi...

    Banner Elk, NC
  • Trusted Seller
    1986 HUNTER 60" COIL COATING

    1986 HUNTER 60" COIL COATING LINE

    • Manufacturer: Hunter

    60" complete line / 2 coat system / very nice Manufacturer: - Hunter - New 1986 Material: - Aluminum Strip Width: - 30 - 60” Strip Thickness: - .008 - .072" Coil Size: - Entry ID = 20/24" - Entry OD = 96" - ...

    Banner Elk, NC
  • Trusted Seller
    1975 HUNTER COIL COATING LINE

    1975 HUNTER COIL COATING LINE

    • Manufacturer: Hunter

    60" Aluminum Can-End Coating Line: CC-157 - Single coat line for light gauge aluminum coatings/finishes. - Sold "as is, where is" EXW on foundation USA. Strip Width: - 60" max / 1524 mm - 66" w/o tension levelin...

    Banner Elk, NC
  • Trusted Seller
    RFS Protech PUR Roll Coater

    RFS Protech PUR Roll Coater

    • Manufacturer: Pro-Tech

    The RFS Protech PUR Roll Coater is a heavy-duty, 14" Hot Melt Roll Coater designed to apply hot melt glue to the face surface of various substrates. The amount of glue applied to the substrate is controlled by ad...

    Montoursville, PA
  • Trusted Seller
    Auction
    Cold Jet Aero 40FP Dry

    Cold Jet Aero 40FP Dry Ice Blasting Machine

    • Manufacturer: Cold Jet

    Cold Jet model Aero 40FP CO2 Blast Cleaner

    Blossburg, PA
    Visit Auction Website
  • Trusted Seller
    Thomas Burkhard 38" S/S Coating

    Thomas Burkhard 38" S/S Coating Pan

    • Manufacturer: Thomas

    One (1) used Thomas Burkhard 38" S/S Coating Pan. This pan features a 24" opening and is 32" deep, equipped with a 2 h.p., 208/60/3 drive motor with on/off switch.

    St. Petersburg, FL
  • Trusted Seller
    Vector HI-Coater LDCS 20/30 Coating

    Vector HI-Coater LDCS 20/30 Coating Pan

      One (1) used Vector Model HI-Coater LDCS 20/30 Coating Pan.This is portable self contained system for film, sugar coating with batch ranges 10% to 100% of brim volume. The pan features stainless steel constructio...

      St. Petersburg, FL
    • Trusted Seller
      48" Thomas Engineering Accela Cota

      48" Thomas Engineering Accela Cota

      • Manufacturer: Thomas

      One (1) used 48" Thomas Engineering Accela Cota coating pan, Model 48-111, stainless steel construction, 48" diameter perforated pan, 19" diameter pan opening, 40" lip to floor height, 400# max load. Unit comes c...

      St. Petersburg, FL
    • Trusted Seller
      Stainless Steel Enrober 10" X

      Stainless Steel Enrober 10" X 48"

        One (1) Used Enrober (mfg unknown) with 10" x 48" long S/S wire rail conveyor traveling over electrically heated product tank with 6- . 750 " coating depositing tubes from single feed manifold with each nozzle on...

        St. Petersburg, FL
      • Trusted Seller
        1993 FREUND-VECTOR HC-48

        1993 FREUND-VECTOR HC-48

        • Manufacturer: Freund-Vector

        Used Vector Freund HC48 Hi-Coater Stainless Steel Coating Pan Manufacturer: Vector Freund Model: HC48 Year: 1993

        Hainesport, NJ
      • Trusted Seller
        66"x24"

        66"x24"

          Used Custom built 24" x 66" cooling roll assembly driven by an approximately a 7.5HP gearhead motor.

          Hainesport, NJ
        • Trusted Seller
          2003 O'HARA LabcoatIIX

          2003 O'HARA LabcoatIIX

          • Manufacturer: O’Hara

          Used O'Hara Technologies model Labcoat IIX 316 stainless steel coating pan system. Unit has (1) 762mm diameter perforated drum, (1) 482mm diameter drum & (1) 381mm diameter drum. Approx batch sizes range from 1kg...

          Hainesport, NJ
        • Superfici Laccabord Edge Coating

          Superfici Laccabord Edge Coating

          • Manufacturer: Superfici

          Laccabord allows the application of colors, fillers, bases on profiles with different shapes. A series of application, drying and painting groups are positioned in sequence to perform the desired finishing proces...

          Wauconda, IL
        • Trusted Seller
          GBC 4500 Laminator

          GBC 4500 Laminator

          • Manufacturer: GBC

          GBC 4500 Laminator Serial #KAG7689 Laminates documents: up to 18” wide | Variable temperature and speed: up to 60” per minute | Pouches: from 1.5 to 10.0 mil and mounting boards up to .01" thick | Warm-up time: ...

          $1,500 USD
          Dallas, NC
        • Trusted Seller
          D & K Single Kote

          D & K Single Kote EZ

          • Manufacturer: D & K

          D & K Single Kote EZ Serial #SK-1752 Electrical: 230V Single Phase 2.4 Watts 60Hz | Unique id: 20241302DNCSK-1752

          $8,000 USD

          Get financing

          Est. $157/mo

          Dallas, NC
        2223242526

        Overview

        Coating and laminating machines are used in various industries to apply a layer of material onto a substrate, improving its durability, appearance, or functionality. These machines are essential in packaging, textiles, and printing industries, where they help create products with enhanced protective and aesthetic qualities. Coating can include adhesives, protective films, or decorative layers, while laminating involves bonding multiple layers together.

        FAQ

        What factors should I consider when buying a coating and laminating machine?

        Consider the type of materials you will be working with, the machine's speed, the coating or laminating width, and the overall quality and reliability of the machine. Additionally, look for features like easy maintenance and user-friendly controls.

        How do I ensure safe shipping of a coating and laminating machine?

        Make sure to use a reputable shipping company that specializes in transporting heavy machinery. Ensure the machine is properly packed, secured, and covered to prevent any damage during transit.

        What maintenance is required for coating and laminating machines?

        Regular maintenance includes cleaning the rollers and other contact surfaces, checking and replacing any worn-out parts, and ensuring that all mechanical components are well-lubricated. Follow the manufacturer's maintenance schedule for specific guidelines.