Used Threading & Tapping in Ontario, Canada

Trusted Seller
WASHER ASSEMBLY MACHINES
- new
- Manufacturer: WASHER ASSEMBLY MACHINES
• Self-Drilling/Tapping Screw/Bolt/Nail Washer Assembly machines •Self - Drilling / Tapping Screw & Washer Assembly Machine (ZYB) •Long Self - Drilling / Tapping Screw & Bonded / BAZ Umbrella Washer Assembly Mach...
Vaughan, Canada
Trusted Seller
NUTAP MAS-14
- used
- Manufacturer: Nutap
- Model: MAS-14
NUT TAPPING MACHINE * Universal hopper * Needs parts/repair
Vaughan, Canada
Trusted Seller
1979 NUTAP MAS-20N
- used
- Manufacturer: Nutap
3/4" NUT TAPPING MACHINE * Vibratory Bowl Feeder + Stand
Vaughan, Canada
Trusted Seller
1976 NUTAP MAS-14
- used
- Manufacturer: Nutap
- Model: MAS-14
NUT TAPPING MACHINE * Vibratory Bowl * Tooled for M6x1 Special Flange Nut with taper end
Vaughan, Canada
Trusted Seller
NUTAP MAS-14NV
- used
- Manufacturer: Nutap
NUT TAPPING MACHINE * Vibratory Bowl Feeder and Tracks to Feed Both Sides * Hopper * Magnetic Chip Separator * Coolant Pump
Vaughan, Canada
Trusted Seller
1999 FK (Fwu Kuang) FN32B
- used
- Manufacturer: FK (Fwu Kuang)
FOUR SPINDLE NUT TAPPING MACHINE * Tooling for 5/8”, 3/4” hex and extra height nuts * Tooling for 5/8” flange * Operator manual
Vaughan, Canada
Trusted Seller
1976 NUTAP MAS-14
- used
- Manufacturer: Nutap
- Model: MAS-14
NUT TAPPING MACHINE * Universal Hopper * Flange Nut tooling for 5/16" and 3/8" nuts **Refurbished & Never used in production since
Vaughan, Canada
Trusted Seller
2018 Jian Hwa HGT-19C
- used
- Manufacturer: Jian Hwa
DUAL SPINDLE NUT TAPPING MACHINE Size range: M6 – M14 (1/4″ to 9/16″) Speed: 70 pieces per minute max Oil tank capacity: 120l Dimensions: 1.90 x 1.80 x 2.05m Net Weight: 1300kg *Magnetic chip filter *Auto defect ...
Vaughan, Canada
Trusted Seller
2007 Dah Lian NT-13B-4TF
- used
- Manufacturer: Dah Lian
FOUR SPINDLE NUT TAPPING MACHINE *Universal Feeder Hopper Setup for 1/4 parts, should run up to 5/16" 480v 60hz Nema 4,12 Enclosure Safety Interlocks 4 new drive motors installed
Vaughan, Canada
Trusted Seller
Brankamp
- new
- Manufacturer: Brankamp
Process Monitors Process Monitors For use with * Cold Headers * Multi-Die Cold Formers * Thread Rolling Machines * Stamping Punch Presses * Forging Presses Featuring: * Easy to Use Handling & Installation * Force...
Vaughan, Canada
Trusted Seller
1980 NATIONAL 3-3
- used
- Manufacturer: National
- Model: 3-3
HOT NUT FORMER Number of Dies: 3 Max Parts Diameter: 67mm (2-5/8") Maximum across flats hex. nuts: 60mm (2-3/8") Max Cutoff dia: 44mm (1-3/4") Max Cutoff Length: 88mm (3-1/2") Max Die Kickout: 100mm (4") Output: ...
Vaughan, Canada
Trusted Seller
1994 National Formax FX44LF
- used
- Manufacturer: National
4Die Long Stroke Boltmaker Max. Cutoff Diameter: .582" (14.8mm) Min-Max. Cutoff Length: .472' - 6.220" (12-158mm) Min-Max. Die Kickout: .787" - 4.921" (20-125mm) Speed output: 105-200 ppm Motor: 59hp (37kW) * ...
Vaughan, Canada
Trusted Seller
Rod Header HRH
- new
- Manufacturer: Rod Header
Hydraulic Rod Header * Six Models: Size Range: 10 - 20mm These machines are suitable for Upsetting, Extruding, Collar Work, Etc. A single machine can perform the following operations fully automatically: ■ Cuttin...
Vaughan, Canada
Trusted Seller
1979 NATIONAL 2-3
- used
- Manufacturer: National
- Model: 2-3
HOT NUT FORMER Maximum Across Flats(Hex): 1 5/8"/ 41.0mm Maximum Cutoff Diameter: 1 1/4"/ 32.0mm Cutoff Length: 2 1/2"/ 63mm Maximum Die Kickout: 3"/ 75.0mm Maximum Speed: 15...
Vaughan, Canada
Trusted Seller
YOSHIHARA YT-3NH
- used
- Manufacturer: Yoshihara
Yoshihara YT-3NH Automatic Bolt Trimmer Nominal shank dia: 0.314" - 0.393" | Max across flats: 0.551 in | Shank length: 2.362 in | Productivity: 150-220 pcs/min.
Burlington, Canada