Agriculture » Combines » Bremen

Building Filters

40

Used engine in Bremen, Germany

  • 1998 New Holland combine harvester

    1998 New Holland combine harvester #M0786

    • Manufacturer: New Holland
    • Hours: 3,284 h
    • Cutting width: 5.1 m

    chopper, automatic height adjustment, fine chopper, yield and moisture meter, mech. drive, New Holland engine

    Bremen, Germany
  • 2009 New Holland combine #M0895

    2009 New Holland combine #M0895

    • Manufacturer: New Holland
    • Hours: 2,286 h
    • Cutting width: 10.6 m

    Chopper, air conditioning, rotor, hydraulic drive, loss measurement, electric sieves, horizontal reel adjustment, on-board computer / performance monitor, air seat, hitch, cutterbar carriage, engine manufacturer

    Bremen, Germany
  • 1988 Fortschritt Maehdrescher #M0767

    1988 Fortschritt Maehdrescher #M0767

    • Manufacturer: Fortschritt
    • Hours: 1,681 h
    • Cutting width: 4.2 m

    mechanical drive Operating hours: 1681 | Engine performance: 92 kW | Cutting tool width: 4.20 m | Comments: mech. Antrieb

    Bremen, Germany
  • 1984 New Holland combine #M648

    1984 New Holland combine #M648

    • Manufacturer: New Holland
    • Cutting width: 4.2 m

    Chipper, Engine performance: 134 kW | Cutting tool width: 4,20 m | Set of tyres - back: 23.1-30 | Set of tyres - front: 12.5-18 | Comments: Häcksler,

    Bremen, Germany
  • 2017 Deutz Fahr combine harvester

    2017 Deutz Fahr combine harvester #M0814

    • Manufacturer: Deutz
    • Hours: 280 h

    AdBlue, air conditioning, reversing device, automatic height adjustment, stone catcher, moisture and yield meter, slope compensation, chopper

    Bremen, Germany
  • 1992 Case Combine Harvester #M0911

    1992 Case Combine Harvester #M0911

    • Manufacturer: Case IH
    • Hours: 2,932 h
    • Cutting width: 6 m

    Operating hours: 2932 | Engine performance: 173 kW | Cutting tool width: 6,00 m | Set of tyres - back: 380/70R24 | Set of tyres - front: 24.5-32 | Comments: Häcksler, Rotor, Klima

    Bremen, Germany
  • 1996 Deutz combine #M0905

    1996 Deutz combine #M0905

    • Manufacturer: Deutz
    • Hours: 3,407 h
    • Cutting width: 4.2 m

    mach. Drive, slope compensation, chopper Operating hours: 3407 | Engine performance: 125 kW | Cutting tool width: 4,20 m | Set of tyres - back: 10.5-18 | Set of tyres - front: 23.1-26 | Shaker count: 5 | Comments...

    Bremen, Germany
  • 1984 New Holland combine #M647

    1984 New Holland combine #M647

    • Manufacturer: New Holland
    • Hours: 4,937 h
    • Cutting width: 6 m

    shredder, rotor, hydr. drive Operating hours: 4937 | Engine performance: 186 kW | Cutting tool width: 6,00 m | Set of tyres - back: 480/70R24 | Set of tyres - front: 18.4-30 | Comments: Häcksler, Rotor, hydr. Ant...

    Bremen, Germany
  • 1998 Deutz Fahr combine harvester

    1998 Deutz Fahr combine harvester #M0874

    • Manufacturer: Deutz
    • Hours: 2,000 h

    Operating hours: 2000 | Engine performance: 228 kW | Cutting tool width: 6,70m m | Set of tyres - back: 405/70R20 | Set of tyres - front: 800/65R32 | Shaker count: 6 | Comments: Hydr. Antrieb

    Bremen, Germany
  • 2011 John Deere combine #M0909

    2011 John Deere combine #M0909

    • Manufacturer: John Deere
    • Hours: 2,890 h

    Operating hours: 2890 | Engine performance: 260 kW | Set of tyres - back: 540/65R30 | Set of tyres - front: 800/65R32 | Comments: Allrad, Klima, Spreuverteiler, Reversereinrichtung, autom. Höhenanpassung, Rückfa...

    Bremen, Germany
  • 1997 Deutz Fahr combine #M0750

    1997 Deutz Fahr combine #M0750

    • Manufacturer: Deutz
    • Hours: 1,934 h
    • Cutting width: 5.4 m

    Climate, hydr. drive Operating hours: 1934 | Engine performance: 176 kW | Cutting tool width: 5,40 m | Set of tyres - back: 14.9/80-24 | Set of tyres - front: 650/75R32 | Shaker count: 6 | Comments: Klima, hydr. ...

    Bremen, Germany
  • 1993 John Deere combine #M0737

    1993 John Deere combine #M0737

    • Manufacturer: John Deere
    • Hours: 3,753 h

    Climate, autom. height adjustment, reversing device, chopper, cutting unit possible for an extra charge ...

    Bremen, Germany
  • 2006 Claas combine #M0751

    2006 Claas combine #M0751

    • Manufacturer: Claas
    • Cutting width: 7.5 m

    All-wheel drive, chopper, loss measurement, yield measurement, pendulum compensation, chaff spreader, throughput control, reel horizontal adjustment, reversing device, on-board computer

    Bremen, Germany
  • 2015 Massey Ferguson combine #M0903

    2015 Massey Ferguson combine #M0903

    • Manufacturer: Massey Ferguson
    • Hours: 1,504 h
    • Cutting width: 9.5 m

    Air conditioning, reversing device, automatic height adjustment, AdBlue, stone trap, chaff spreader, chopper

    Bremen, Germany
  • 1986 John Deere combine #M0900

    1986 John Deere combine #M0900

    • Manufacturer: John Deere
    • Hours: 3,465 h
    • Cutting width: 3.65 m

    Air conditioning, mech. drive, servo, reversing device, chopper

    Bremen, Germany
123

Overview

Combines, also known as combine harvesters, are essential agricultural machines used for efficiently harvesting crops like wheat, corn, soybeans, and more. These machines combine three critical operations - reaping, threshing, and winnowing - into a single process, significantly reducing the time and labor needed for harvesting.

FAQ

What should I look for when buying a used combine?

Check the engine hours, wear on the threshing components, overall condition, maintenance records, and any signs of rust or damage. Ensure the combine has the necessary features for your specific crop needs.

How is a combine typically shipped?

Combines are usually shipped via specialized heavy machinery transport services. They are often partially disassembled for easier transport and require proper securing to prevent any damage.

What maintenance does a combine require?

Regular maintenance includes checking and changing the engine oil, inspecting belts and chains, cleaning air filters, greasing moving parts, and ensuring the cutting and threshing components are in good condition. Consult the manufacturer’s manual for detailed maintenance schedules.