Used Combines in Germany

Trusted Seller
2015 Fendt Combine Harvester 8410 P
- Manufacturer: Fendt
- Model: 8410 P
- Horsepower: 398 hp
- Hours: 1,650 h
Combine Harvester 8410 P GPS equipment EGNOS hydraulic header drive hydraulic reversing system cutting height automation lowering automation electric setting for threshing drum electric fan adjustment electric ...
Holle, Germany
Claas combine #M0283
- Manufacturer: Claas
- Hours: 2,050 h
- Cutting width: 3.9 m
mech. drive, 5x shaker Operating hours: 2050 | Engine performance: 88 kW | Cutting tool width: 3,90 m | Set of tyres - back: 12.5 R 18 - 70 % | Set of tyres - front: 23.1 R 26 - 70 % | Shaker count: 5 | Comments:...
Bremen, Germany
1996 Claas combine #M0775
- Manufacturer: Claas
- Hours: 3,512 h
- Cutting width: 5.1 m
Operating hours: 3512 | Engine performance: 125 kW | Cutting tool width: 5,10 m | Set of tyres - back: 650/75R34 | Set of tyres - front: 500/60-22.5 | Shaker count: 5 | Comments: Häcksler, 3-D, Reversiereinricht...
Bremen, Germany
John Deere combine #M0680
- Manufacturer: John Deere
- Hours: 575 h
- Cutting width: 6.8 m
Fine chopper, air conditioning, on-board computer, 6x straw walkers, yield measurement,
Bremen, Germany
2003 Claas combine #M0663
- Manufacturer: Claas
- Cutting width: 6 m
Auto Contour, on-board computer, throughput control, yield measurement, pendulum compensation, reversing device, automatic cutterbar guidance, loss measurement, chaff spreader, chopper, air conditioning, cutterba...
Bremen, Germany
1996 Deutz combine #M0905
- Manufacturer: Deutz
- Hours: 3,407 h
- Cutting width: 4.2 m
mach. Drive, slope compensation, chopper Operating hours: 3407 | Engine performance: 125 kW | Cutting tool width: 4,20 m | Set of tyres - back: 10.5-18 | Set of tyres - front: 23.1-26 | Shaker count: 5 | Comments...
Bremen, Germany
2008 Fendt combine #M0722
- Manufacturer: Fendt
- Hours: 1,628 h
- Cutting width: 6.5 m
Climate, on-board computer, all-wheel drive, slope compensation, loss measurement, throughput control, reel horizontal adjustment, reversing device, pendulum compensation, cutterbar guidance automatic, hydr. driv...
Bremen, Germany
2006 Claas combine #M0751
- Manufacturer: Claas
- Cutting width: 7.5 m
All-wheel drive, chopper, loss measurement, yield measurement, pendulum compensation, chaff spreader, throughput control, reel horizontal adjustment, reversing device, on-board computer
Bremen, Germany
1992 Case Combine Harvester #M0911
- Manufacturer: Case IH
- Hours: 2,932 h
- Cutting width: 6 m
Operating hours: 2932 | Engine performance: 173 kW | Cutting tool width: 6,00 m | Set of tyres - back: 380/70R24 | Set of tyres - front: 24.5-32 | Comments: Häcksler, Rotor, Klima
Bremen, Germany
John Deere combine #M0906
- Manufacturer: John Deere
- Hours: 3,160 h
- Cutting width: 4.85 m
Operating hours: 3160 | Engine performance: 155 kW | Cutting tool width: 4,85 m | Set of tyres - back: 30.5L32 | Set of tyres - front: 16.5/85-24 | Shaker count: 5 | Comments: Klima, Pendelausgleich, Verlustanze...
Bremen, Germany
2017 Case combine harvester #M0908
- Manufacturer: Case IH
- Hours: 1,800 h
Operating hours: 1800 | Engine performance: 366 kW | Set of tyres - back: 620/70R26 | Set of tyres - front: 800/70R38 | Comments: Klima, Luftsitz, Umkehrgetriebe, Rückfahrkamera, AdBlue, autom. Höhenanpassung, S...
Bremen, Germany
2015 Massey Ferguson combine #M0903
- Manufacturer: Massey Ferguson
- Hours: 1,504 h
- Cutting width: 9.5 m
Air conditioning, reversing device, automatic height adjustment, AdBlue, stone trap, chaff spreader, chopper
Bremen, Germany
1986 John Deere combine #M0900
- Manufacturer: John Deere
- Hours: 3,465 h
- Cutting width: 3.65 m
Air conditioning, mech. drive, servo, reversing device, chopper
Bremen, Germany
1984 New Holland combine #M648
- Manufacturer: New Holland
- Cutting width: 4.2 m
Chipper, Engine performance: 134 kW | Cutting tool width: 4,20 m | Set of tyres - back: 23.1-30 | Set of tyres - front: 12.5-18 | Comments: Häcksler,
Bremen, Germany
1993 Massey Ferguson combine #M0413
- Manufacturer: Massey Ferguson
- Hours: 2,597 h
- Cutting width: 5.5 m
cab, air conditioning, chopper, power-flow, reversing device, throughput control, reel horizontal adjustment
Bremen, Germany